| auszookers.com http://auszookers.com/forum/ |
|
| LJ 50 pistons http://auszookers.com/forum/viewtopic.php?f=5&t=55398 |
Page 1 of 1 |
| Author: | boofdog [ Sun Aug 26, 2018 7:15 am ] |
| Post subject: | LJ 50 pistons |
Hi all, Chasing an oversize piston and ring set for an LJ 50. Can anyone point me in the right direction? Actually doing a full rebuild so any info on sourcing parts for the little 2 banger would be helpful Cheers, Boofdog |
|
| Author: | barbender [ Wed Aug 29, 2018 7:12 pm ] |
| Post subject: | Re: LJ 50 pistons |
Boofdog, I had an LJ50 in the 70's, I replaced the pistons with the pistons from the 3 cyl 2 stroke van, not sure of the engine designation but you should be able to source that online, I had to have the engine bored to accept the 2 stroke van pistons as they were a fair bit larger and from memory it upped the capacity to 650 - 660 cc, no other modifications were done to the engine the increase in performance was quite noticeable. I will look online and see if I can find any other info for you. regards barbender. |
|
| Author: | boofdog [ Thu Aug 30, 2018 12:44 pm ] |
| Post subject: | Re: LJ 50 pistons |
Cheers Barbender, Have found a set of standard pistons and rings, but definitely need a re bore, so will have to go oversize. I thought the old 2 stroke van had the same lj50 motor. Someone told me they used to do three oversizes, .5mm, .75mm, 1mm I did happen to find one 1mm over piston, but really need a full set and rings as well. |
|
| Author: | suzukitas [ Thu Aug 30, 2018 9:54 pm ] |
| Post subject: | Re: LJ 50 pistons |
I have plenty of used engine parts for the 2 stroke, but nothing aftermarket like oversized pistons etc. |
|
| Author: | barbender [ Fri Aug 31, 2018 11:23 am ] |
| Post subject: | Re: LJ 50 pistons |
There was a thread started by tanshi, post date Sunday October 24th, 2010 at 7:17 am. similar to what you want, regarding the Suzuki Carry engine, I am looking for an old 4x4 mag that had a lot of info on this when I rebuilt my LJ50, if I can find it I will scan it and email it to you. regards, barbender |
|
| Author: | boofdog [ Wed Sep 05, 2018 8:00 pm ] |
| Post subject: | Re: LJ 50 pistons |
Cheers barbender, Any info is helpful!! I am talking to a bloke who may be able to sleeve the damaged bore so that the standard size pistons can be used. |
|
| Author: | tanshi [ Fri Sep 07, 2018 1:12 pm ] |
| Post subject: | Re: LJ 50 pistons |
you can buy them new on EBAY |
|
| Author: | boofdog [ Fri Sep 07, 2018 3:31 pm ] |
| Post subject: | Re: LJ 50 pistons |
Yes tanshi, only in standard size. Was just seeing if anyone knew where to get OVERSIZE. All good I'll get there! |
|
| Author: | davidraeburn [ Mon Sep 10, 2018 8:03 pm ] |
| Post subject: | Re: LJ 50 pistons |
Full engine rebuild kits for all Suzuki models with several os piston sizes are available from 4x4 parts on e bay good quality and price have used them several times for Suzy parts new owners but still good service. |
|
| Author: | tanshi [ Thu Sep 13, 2018 10:22 am ] |
| Post subject: | Re: LJ 50 pistons |
you can get OS size ones on ebay bud |
|
| Author: | boofdog [ Thu Sep 27, 2018 10:35 am ] |
| Post subject: | Re: LJ 50 pistons |
Cheers Guys, I have got hold of a set!! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|