auszookers.com https://auszookers.com/forum/ |
|
Timing mark on G13bb flywheel? https://auszookers.com/forum/viewtopic.php?f=5&t=55648 |
Page 1 of 1 |
Author: | Majortob [ Fri Feb 08, 2019 5:08 pm ] |
Post subject: | Timing mark on G13bb flywheel? |
Hi all, Do all G13bb have the flywheel timing marks? I suspect a spun balancer, which is making timing a nightmare. |
Author: | Majortob [ Fri Feb 08, 2019 5:55 pm ] |
Post subject: | Re: Timing mark on G13bb flywheel? |
Don’t worry I answered my own question. It does not have a timing mark. Back to square one |
Author: | fordem [ Sat Feb 09, 2019 2:25 am ] |
Post subject: | Re: Timing mark on G13bb flywheel? |
It should not be hard to "verify" a "spun" balancer - remove the #1 spark plug, stick a drinking straw in and slowly rotate the engine until the piston is at TDC and then look at the notch on the pulley. |
Author: | rexhunta [ Sat Feb 09, 2019 8:59 am ] |
Post subject: | Re: Timing mark on G13bb flywheel? |
https://www.youtube.com/watch?v=2Yh2ZpKHkq4 This is a good guide too. |
Page 1 of 1 | All times are UTC + 9:30 hours |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |