| auszookers.com http://auszookers.com/forum/ |
|
| drive line clunking http://auszookers.com/forum/viewtopic.php?f=5&t=57569 |
Page 1 of 1 |
| Author: | project82zute [ Wed Aug 30, 2023 2:10 pm ] |
| Post subject: | drive line clunking |
G'day all, my 1982 LWB NT has a gnarly clunk in the rear end when changing gears and reversing, even when putting through town, it sounds like the diff but we pulled it out and found nothing (sun gears slightly worn) so we put a LJ80 4.9*1 diff in and fix it a bit, but now its even worse, we had a little geez underneath and found the drive shaft looks to be the issue, it has quite a bit of backlash from the slip yoke. if anyone knows or had this issue, some help will be super handy! thanks. |
|
| Author: | shakes [ Fri Sep 01, 2023 6:43 am ] |
| Post subject: | Re: drive line clunking |
Uni joints? |
|
| Author: | project82zute [ Fri Sep 01, 2023 1:38 pm ] |
| Post subject: | Re: drive line clunking |
Unis are all brand new, but is also a worry |
|
| Author: | rpmwrx [ Fri Sep 01, 2023 4:19 pm ] |
| Post subject: | Re: drive line clunking |
I've got the same issue in my LWB Sierra. In my case, it's the drum brake / hand brake on the back of the transfercase that is making clunking noises. I'm planning to pull it apart and rebuild it. I hope that fixes my clunking issue. |
|
| Author: | project82zute [ Sat Sep 02, 2023 3:11 pm ] |
| Post subject: | Re: drive line clunking |
Ahhh ok! That might also be the issue with mine, thanks for telling me that, i might have a look soon |
|
| Author: | Gwagensteve [ Sun Sep 03, 2023 10:20 am ] |
| Post subject: | Re: drive line clunking |
Yes. 1.0 litres have small driveshafts which are prone to wear. Another source of clunking can be from a cracked/distorted axle housing at the U bolts 1.0 litres are prone to this. Every LWB 1.0 I've seen has required the housing welded up. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|