| auszookers.com http://auszookers.com/forum/ |
|
| Heater hoses sj70 http://auszookers.com/forum/viewtopic.php?f=5&t=58010 |
Page 1 of 1 |
| Author: | Zookscooked [ Thu Apr 30, 2026 5:08 pm ] |
| Post subject: | Heater hoses sj70 |
Hey guys, Does anyone happen to have a part number for a set of heater hoses to suit a sj70? Gates or Mackay preferably. |
|
| Author: | Andygoodbloke [ Wed May 27, 2026 4:18 pm ] |
| Post subject: | Re: Heater hoses sj70 |
I would be purchasing the standard heater hose and cutting it slightly longer than the one which came out as the shape will happen over time, if cut slightly longer it will allow for bends and if you need to cut an end, etc It is available from the likes of Repco, or super cheap, and is very commonly available and will cost a hell of a lot less than a custom one out of India which is the other option. Andy |
|
| Author: | HarryHoudini [ Wed May 27, 2026 9:54 pm ] |
| Post subject: | Re: Heater hoses sj70 |
Great to see the Forum back,yes just cut generic heater hose to fit. |
|
| Author: | fordem [ Wed May 27, 2026 11:15 pm ] |
| Post subject: | Re: Heater hoses sj70 |
Please make sure it's heater hose, coolant will turn fuel/oil rated hoses brittle & inflexible. |
|
| Author: | Gwagensteve [ Thu May 28, 2026 9:16 am ] |
| Post subject: | Re: Heater hoses sj70 |
The heater inlet hose has a very sharp kink in it and if using generic hose it will need to be quite long to make the bend. I’d recommend a genuine hose for that location. |
|
| Author: | Zookscooked [ Thu May 28, 2026 4:36 pm ] |
| Post subject: | Re: Heater hoses sj70 |
Thanks guys I found some gates numbers if anyone else needs them: 02-0181 02-0145 Havent ordered them yet to verify. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|