| auszookers.com http://auszookers.com/forum/ |
|
| G13bb sump on G16b lacking baffle plate http://auszookers.com/forum/viewtopic.php?f=5&t=58014 |
Page 1 of 1 |
| Author: | Damon [ Sun May 31, 2026 8:20 pm ] |
| Post subject: | G13bb sump on G16b lacking baffle plate |
In preparation for replacing the engine in my son’s Jimny we have removed the sump. On removal we noticed that the baffle plate, assuming that it is it function, had be mostly removed/modified. Is this an issue? Guessing it was done to possibly fit the modified oil pick up. Is it an issue that that part is mostly missing? |
|
| Author: | BlueSuzy [ Wed Jun 03, 2026 3:49 pm ] |
| Post subject: | Re: G13bb sump on G16b lacking baffle plate |
Depends on the sump, If it has quite a deep drop at the rear, it will probably be fine. My sump is very flat with a pickup in the middle, I only see an issue on waterfall type climbs Will fix it one day.. |
|
| Author: | Damon [ Wed Jun 03, 2026 9:38 pm ] |
| Post subject: | Re: G13bb sump on G16b lacking baffle plate |
It is a standard Jimny sump, so deep drop at rear. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|