| auszookers.com http://auszookers.com/forum/ |
|
| Third member question!!!! http://auszookers.com/forum/viewtopic.php?f=5&t=5838 |
Page 1 of 1 |
| Author: | zuki [ Mon Aug 03, 2009 2:18 am ] |
| Post subject: | Third member question!!!! |
I was just wondering if anyone knows if a rear Coily centre (the actual casting has 2 lugs cast into it) can be used, or will fit in a front WT diff housing. I already have 3.9 ratios so that part is not an issue, I have a rear air I want to put in the front with a set of 26 spline CV axles, and I would like to just pull centre out of my rear and bolt straight into front housing. Then use the front centre in the rear housing. If anyone can shed some light on this I would appreciate it. David |
|
| Author: | royce [ Mon Aug 03, 2009 2:25 am ] |
| Post subject: | Re: Third member question!!!! |
you have a coily rear in the rear now I take it? can only guess it will fit, assuming the lugs done foul on anything |
|
| Author: | zuki [ Mon Aug 03, 2009 2:39 am ] |
| Post subject: | Re: Third member question!!!! |
royce wrote: you have a coily rear in the rear now I take it?
can only guess it will fit, assuming the lugs done foul on anything Yes sorry I have a coily rear in the rear at the moment David |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|