| Author |
Message |
bigrig91
Joined: Mon May 11, 2009 11:30 pm Posts: 1308 Location: Redcliffe
Vehicle: 96 LWB Vit, 2.5L powerhouse
|
 Posted: Sun Dec 20, 2009 10:59 pm |
|
Hey guys, replacing the bushes in my pan hard rod over the holidays and was also hoping to get a set of castor/camber correction bushes,? Does anyone know where what how i can get some and also if i replace the front should i do the rear??
cheers
What does everyone think of this????? Im not that worried about the flex i will/might lose??????
http://stores.channeladvisor.com/Online ... 01996-1998
_________________ 1997 Sierra, daily driver, 60mm coils, 2 inch body
Last edited by bigrig91 on Sun Dec 20, 2009 11:15 pm, edited 1 time in total.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Dec 20, 2009 11:13 pm |
|
|
The rear doesn't matter, no steering on the rear.
Pm Rusho, he's had it done to his car
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
bigrig91
Joined: Mon May 11, 2009 11:30 pm Posts: 1308 Location: Redcliffe
Vehicle: 96 LWB Vit, 2.5L powerhouse
|
 Posted: Sun Dec 20, 2009 11:16 pm |
|
|
To easy thanks man, your car is looking quite good to bet your cheering to have it back.
_________________ 1997 Sierra, daily driver, 60mm coils, 2 inch body
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
 Posted: Sun Dec 20, 2009 11:51 pm |
|
|
AFAIK you can't get, nor should you want/need eccentric bushes for a panhard rod but they are available for, (and handy in) lifted cars with RADIUS arms.
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Mon Dec 21, 2009 12:26 am |
|
|
Suzi sport at lawnton.....if they ain't broke in the back don't fix em'
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
oozuk
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1452 Location: bethania QLD
|
 Posted: Mon Dec 21, 2009 1:02 am |
|
steknig wrote: The rear doesn't matter, no steering on the rear.
Pm Rusho, he's had it done to his car
rear does matter with big lift, it corrects spring seat and shock pin angles on the rear end with 80mm lift and over
_________________ building a bling zook .......will it ever be finis
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Mon Dec 21, 2009 1:20 am |
|
bigrig91 wrote: Hey guys, replacing the bushes in my pan hard rod over the holidays and was also hoping to get a set of castor/camber correction bushes,? Does anyone know where what how i can get some and also if i replace the front should i do the rear?? cheers What does everyone think of this????? Im not that worried about the flex i will/might lose?????? http://stores.channeladvisor.com/Online ... 01996-1998
That shop's friggen awesome!!! thay sell klaxton horn's!
Oh, kit look's good to. 
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Mon Dec 21, 2009 2:04 am |
|
|
I did the front for under $200 I THINK... That was castor correction and standard bush for the rear of the front arm, like I said, I THINK. Not 100 % sure about the cost. Then there is also an alignment and fitting(apparently its a bit tricky to do)
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
bigrig91
Joined: Mon May 11, 2009 11:30 pm Posts: 1308 Location: Redcliffe
Vehicle: 96 LWB Vit, 2.5L powerhouse
|
 Posted: Mon Dec 21, 2009 2:44 am |
|
|
yeh shop goes pretty good. i go there a bit. Thanks rusho i will just have to do some research i guess. bugger. I only have 2 inch spring lift oozuk so i dont think the rear will matter.
cheers boys
_________________ 1997 Sierra, daily driver, 60mm coils, 2 inch body
|
|
|
|
 |
|