Can you read? It WON'T bolt up.
Your motor is either Carb G13a or ba.
That mainfold is for a EFI G16b
Edit* I should get it as i have a Baleno G16b in mine
| auszookers.com http://auszookers.com/forum/ |
|
| G16B motor and a G13B/BA motor http://auszookers.com/forum/viewtopic.php?f=5&t=8755 |
Page 1 of 1 |
| Author: | holdenrules [ Sun Dec 20, 2009 6:27 pm ] |
| Post subject: | G16B motor and a G13B/BA motor |
hey can any one helpme on this one i have found a G16B turbo manifold off a baleno will this bolt onto my g13b motor at all?? have they both got the same exhaust housing?? |
|
| Author: | BlueSuzy [ Sun Dec 20, 2009 6:43 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
title and question conflict! is this your original g13ba? Efi motors have different manifolds to the Carbs. Carb G13ba, G13a, G16a are same to each other. Efi G13b, G16b and some import G16a are same to each other. |
|
| Author: | matty87 [ Sun Dec 20, 2009 6:44 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
Turbo manifold? they make a turbo manifold for the g16b or is it a custom job that someone had done ? that said i think that it should bolt up but dont quote me on that. |
|
| Author: | BlueSuzy [ Sun Dec 20, 2009 6:46 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
It will be a custom manifold. |
|
| Author: | holdenrules [ Sun Dec 20, 2009 6:59 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
http://www.redlinegti.com/forum/viewtop ... =3&t=39884 its that one there im after. mine is 1987 lwb ute factory 1.3. wht woul it be G13a or G13ba?? will this fit |
|
| Author: | brendan [ Sun Dec 20, 2009 7:10 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
thats a custom manifold mate |
|
| Author: | holdenrules [ Sun Dec 20, 2009 7:12 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
yer know itscustom just wondering will it boltup to my 1.3 or not?? |
|
| Author: | BlueSuzy [ Sun Dec 20, 2009 7:18 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
Can you read? It WON'T bolt up. Your motor is either Carb G13a or ba. That mainfold is for a EFI G16b Edit* I should get it as i have a Baleno G16b in mine
|
|
| Author: | steak_knife [ Sun Dec 20, 2009 7:18 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
If you have a grinder & a mig you can make your own, how much is he asking?? |
|
| Author: | BlueSuzy [ Sun Dec 20, 2009 7:22 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
Yeah carb and efi. 2 totally different systems. May as well get a G16b as well. Besides. That manifold is setup for a fwd car. You really want your turbo where the engine mount is? Where are you going to put you engine mount? I really think you need to think. |
|
| Author: | want33s [ Sun Dec 20, 2009 11:56 pm ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
G16B and G13BB have same exhaust head pattern. G16A, G13B & G13BA are different. |
|
| Author: | holdenrules [ Mon Dec 21, 2009 12:40 am ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
ok guy thanks fo the help. i could cut the exhaust flang off and weld a g13ba on it but is it really worth it?? migh as wel make me own. |
|
| Author: | BlueSuzy [ Mon Dec 21, 2009 2:21 am ] |
| Post subject: | Re: G16B motor and a G13B/BA motor |
BlueSuzy wrote: Besides. That manifold is setup for a fwd car. You really want your turbo where the engine mount is? Where are you going to put your engine mount? I really think you need to think. Did you actually read my post????? Make your own. Then you have other issues. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|