auszookers.com
http://auszookers.com/forum/

Suzuki baleno wiring pinout HELP
http://auszookers.com/forum/viewtopic.php?f=5&t=8767		 Page 1 of 1
Author:  MrRocky [ Mon Dec 21, 2009 3:30 am ]
Post subject:  Suzuki baleno wiring pinout HELP
First post on here, unfortunately its not a flash one but...
Currently putting an early model baleno motor with dizzy and single coil into my sierra and cant find any diagrams/pinouts to suit my ecu. Its really doin my head in, ive been on the computer for the last 2 days trying to find something.

I have even considered putting the 1ltr back in.

The ecu reads
6K
1.6 E24
33920 - 60GM 2
112000 - 4540

Any help appreciated
cheers mick
Author:  eldo [ Mon Dec 21, 2009 3:37 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
reckon if you post up some pics of your beast someone will help you out.
Author:  Fatzook [ Mon Dec 21, 2009 3:41 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
MrRocky wrote:
First post on here, unfortunately its not a flash one but...
Currently putting an early model baleno motor with dizzy and single coil into my sierra and cant find any diagrams/pinouts to suit my ecu. Its really doin my head in, ive been on the computer for the last 2 days trying to find something.

I have even considered putting the 1ltr back in.

The ecu reads
6K
1.6 E24
33920 - 60GM 2
112000 - 4540

Any help appreciated
cheers mick


I replied on outers.
Author:  Joe [ Mon Dec 21, 2009 4:59 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
eldo wrote:
reckon if you post up some pics of your beast someone will help you out.


x2 we like pics around here :wink:
Author:  MrRocky [ Mon Dec 21, 2009 6:35 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
sorry guys how rude of me
Image
Image
Image
Image
Author:  Joe [ Mon Dec 21, 2009 7:48 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
:shocked: That second last pic looks like it was a brown pants moment :oops:
Welcome to AZ matey ya got a nice trayback hopefully someone on here can help ya out with ya wiring probs :wink:
Author:  MrRocky [ Mon Dec 21, 2009 7:30 pm ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
suprisingly it floated across and i got 3/4 of the way up the bank and thought id just reverse and have another go. I didnt realise i floated and when i reversed i floated for about 2 secs then went down to the bottom of the steering wheel. Attatching the snatch was interesting, finally had to get winched out, turned they key she fired first go and of she went haha
Author:  Joe [ Mon Dec 21, 2009 7:33 pm ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
Sweet any luck with the wiring it sucks working on cars in this heat aye :P
Author:  MrRocky [ Mon Dec 21, 2009 10:28 pm ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
progress is slow, i just killed one ecu by mixing up an earth with a power haha oops smoky 8O
Author:  PJ.zook [ Mon Dec 21, 2009 10:45 pm ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
Yeh someone needs to invent some kind of compressor to put the smoke back into the components.
Author:  MrRocky [ Tue Dec 22, 2009 4:46 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
ITS ALIVE 8O :) :lol:

had to replace the ecu as i suspected it was fried
Just took her for a lap around the block and i reckon its quicker than my v8 cruiser, but jeez the lifters are sooo noisy.
The 6;5 gears and 4.1 diffs make it seem a bit quicker than it is i think.
Author:  Joe [ Tue Dec 22, 2009 4:53 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
Good job matey well done :D
Author:  zooktastic [ Sat Aug 28, 2010 8:23 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
hey guys im chasing a wiring diagram for the same motor. any help will be greatly appreciated
Author:  MrRocky [ Sat Aug 28, 2010 8:38 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
scroll down and follow the links, i got my diagram from redline gti but im not to sure what thread it was in see if the ones listed match your ecu, if not you will have to search the site.

http://www.redlinegti.com/forum/vtn.177710.htm

its the links down the bottom from thegreatestsuzukisiteintheworld i think
double check as there are heaps of variants that are the wrong diagrams
Author:  xedent [ Sat Aug 28, 2010 8:49 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
Can you post some pics of your engine bay ?
Author:  zooktastic [ Sat Aug 28, 2010 11:01 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
already have them diagrams, my wiring doesnt match any diagram i have come across yet :( the wiring came with the motor so i have no idea wether it is the right loom. ill get an engine bay pic 2moro, not sure how much help it will be tho...
Author:  steak_knife [ Sat Aug 28, 2010 11:06 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
When thay show a pic of a plug, it's ALWAY'S the back of the plug..

have another look at the wiring diag knowing that..
Author:  zooktastic [ Sat Aug 28, 2010 11:18 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
i looked at it from both sides. the bigger of the 3 ecu plugs has the middle 6 terminals on the bottom row blank which doesnt really match any diagrams. :S
Author:  steak_knife [ Sat Aug 28, 2010 11:21 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
Is it an import eng??

If you have all other base's covered??, see if it will run with out em..

do thay go anywhere in the harness??
Author:  zooktastic [ Sat Aug 28, 2010 11:28 am ]
Post subject:  Re: Suzuki baleno wiring pinout HELP
im not sure, i bought the loom an ecu with the motor from some bloke in maitland. im starting to wonder if the loom is meant for the ecu? or if the 2 were pulled from different cars :S it came from a wrecking yard so anything is possible... im stumped honestly
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/