auszookers.com
http://auszookers.com/forum/

Does anyone have a scan tool that can read swift sport?
http://auszookers.com/forum/viewtopic.php?f=5&t=8834		 Page 1 of 1
Author:  Fatzook [ Thu Dec 24, 2009 3:01 am ]
Post subject:  Does anyone have a scan tool that can read swift sport?
Hi All,

I started the car tonight and it started hunting and carrying on. So I turnbed it off and then back on and now its fine. It has logged an error code tho, as the check engine light is staying on.

Does anyone have a scantool that can read my ECU? Its a series 1 swift sport. 09/06.

I plan on taling it to suzuki as its under warranty still, I just need to know if its urgent or not.

Cheers
Peter
Author:  steak_knife [ Thu Dec 24, 2009 3:03 am ]
Post subject:  Re: Does anyone have a scan tool that can read swift sport?
:roll: Hullo :roll: :roll:
Author:  Damo [ Thu Dec 24, 2009 3:38 am ]
Post subject:  Re: Does anyone have a scan tool that can read swift sport?
steknig wrote:
:roll: Hullo :roll: :roll:


You'll need the correct adapter that someone has pinched :P
Author:  steak_knife [ Thu Dec 24, 2009 3:40 am ]
Post subject:  Re: Does anyone have a scan tool that can read swift sport?
Damo wrote:
steknig wrote:
:roll: Hullo :roll: :roll:


You'll need the correct adapter that someone has pinched :P


Different tool, not me, the scan tool. :P

His car is OBD2, you's is ment to be OBD1 :roll:
Author:  Fatzook [ Thu Dec 24, 2009 4:37 am ]
Post subject:  Re: Does anyone have a scan tool that can read swift sport?
Thanks Stekky 8)
Author:  Fatzook [ Thu Dec 24, 2009 6:56 am ]
Post subject:  Re: Does anyone have a scan tool that can read swift sport?
Check engine light has now cleared itself?????? :?

I drove it home (50 mins) and it was on SOLID!. Turned car on and off at lights etc as I made the journey with no change.

I just went to chermside ( I know, what a fucktard!!) for xmas shopping and it was on all the way there. I returned to the car and started it, and light is now off. It still comes on for a few seconds after starting then clears as normal.

WFT is going on?

I thought the light stayed on until it was cleared with a scan tool?? :?

Pete
Author:  Rockhopper [ Thu Dec 24, 2009 11:14 am ]
Post subject:  Re: Does anyone have a scan tool that can read swift sport?
the light might not be on, but any errors should still be logged in there
Author:  oozuk [ Thu Dec 24, 2009 9:42 pm ]
Post subject:  Re: Does anyone have a scan tool that can read swift sport?
when the light turns off the fault becomes an inactive code, there will still be a record of the code in the Ecu that will need clearing
Author:  steak_knife [ Thu Dec 24, 2009 11:10 pm ]
Post subject:  Re: Does anyone have a scan tool that can read swift sport?
oozuk wrote:
when the light turns off the fault becomes an inactive code, there will still be a record of the code in the Ecu that will need clearing


Dose no harm to stay there, can be a Lil upsetting to the like's of me when a car has 26 fault code's in it tho 8O :? :evil:


C ya soon Pete :P :wink: 8) :? :) :?: :arrow: :roll:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/