| auszookers.com http://auszookers.com/forum/ |
|
| Rear Disk brakes for a sierra. http://auszookers.com/forum/viewtopic.php?f=5&t=956 |
Page 1 of 1 |
| Author: | tanshi [ Thu May 03, 2007 3:12 pm ] |
| Post subject: | Rear Disk brakes for a sierra. |
I have found a Mod Certifyer who will happily mod plate rear disk brake swap as long as i use a fabricated kit from somewhere like suzisport. My question is i have heard that you can use pintara calipers to retain the rear cable handbrake. Does any one know if this means that the pintara ones are the same bolt pattern eg bolt straight up? or if they need modification to the kit ie drilling welding. making it harder to get it plated. |
|
| Author: | royce [ Thu May 03, 2007 3:19 pm ] |
| Post subject: | Re: Rear Disk brakes for a sierra. |
they are different but I am prety sure they bracket you need to make up can be made from flat steel so no bending or welding required pulsar rear are similar but need a spacer to line the caliper up |
|
| Author: | azza [ Fri May 04, 2007 2:14 am ] |
| Post subject: | Re: Rear Disk brakes for a sierra. |
mine doesn't go fast enough to need rear discs!! |
|
| Author: | TZAR [ Sat May 05, 2007 12:06 am ] |
| Post subject: | Re: Rear Disk brakes for a sierra. |
No sierra does. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|