[Highway-Star]

I have a LWB Sierra tub on a chassis I need to be rid of. Had numerous people interested in it, but no one has even got back to me to have a look at it. So here is the info:

The body: Comes with damaged front guards and bonnet. No wind screen frame, or targa bar etc. Tub has 2 notable "dints" on the passenger side. One should pull out and panel beat easily enough (just behind passenger door). The other is underneath the left hand side of the windscreen frame; this is notable, and may require allot of panel beating or maybe a donor panel from a tub worthy of chopping up. Rust is quite low, though is evident around the worst of the 2 mentioned dints, and in both foot wells. Also around the drivers seat mounts. Back half of the tub is about the best I have seen in a LWB tub. both sills have been hacked out, and an attempt at sliders has been made... this could do with tidying up or re-doing.

The Chassis: Has had a front end bingle, and the front crossmember needs replacement. Also has a poorly done RUF.... so we FUF'd it
Has a mod plate associated with the chassis for a G16 conversion and 2 seat capacity.
Has a body lift, don't know the details on this though.

Wheels, diffs etc: Comes on a set of LJ80 diffs and old crusty bar treads. These are there to move it around, get it on a trailer etc. I don't want them, so you get them with the rest for free (will charge any buyer a $2000 surcharge to return these items).


Purchase Scheme: I want $350 for the lot as is. Pickup only!!! near Ipswich QLD.
PM me if your interested. My house phone is currently cactus so I will have to try and communicate with people via PM/email...



Here are some pictures.

[Highway-Star]

Does anyone want it? Or can I chop bits out of the firewall for use in an LJ.

[JrZook]

Looks like it should belong in Damo's wrecking yard errrr shed

[Highway-Star]

JrZook wrote:

Looks like it should belong in Damo's wrecking yard errrr shed

I'm good with that. I want stuff gone!!!

[boostedbrick]

I would be interested in the chassis and mod plate if you feel the urge to cut stuff up

I don't want a tub though, no room for it.

[slowsierra]

i wouldn't mind the body if it was from a 1.3L LWB. might be able to sort something out with Boostedbrick.


PM me boosted brick if you want to do that?

[ZookiMonsta]

If all the bills hadnt come at once, this would be mine!!!

[Highway-Star]

ZookiMonsta wrote:

If all the bills hadnt come at once, this would be mine!!!

If your genuinely keen Corey, talk to me. We should be able to figure something out

[Highway-Star]

SOLD; pending payment and pickup