| auszookers.com http://auszookers.com/forum/ |
|
| Wrecking 1989 G16A SWB Vitara Softop http://auszookers.com/forum/viewtopic.php?f=7&t=16207 |
Page 1 of 1 |
| Author: | deathdoll [ Mon Oct 25, 2010 8:47 am ] |
| Post subject: | Wrecking 1989 G16A SWB Vitara Softop |
hi all. I have a swb vit up for sale. been hit in an accident on the passenger front guard. haven't been run for 3 months. doesn't start. i think the starter motor has burnt out or stuffed alternator cos it was running one day and not the other. can sell the car as a whole or can strip everything except the front passenger guard and rear tailgate (tree dent) is for sale. G16A motor - new head gasket,intake exhaust gasket, rocker gasket and water pump. needs front main seal, pan gasket and maybe rear main - std carby and exhaust (345000km) std Gearbox - good condition but not sure if whines cos car was just noisy as when running but shifts good. diffs both ends - good condition doors both good with all electrics working good windscreen soft top good condition - has some minor scratches from branches but visibility is still good. top has faded a little from sun but hasn't shrunk. (bought new in 2007 bestop) radiator - some bent fins but does the job. car don't get hot at all Diffs both ends driveshafts. rear has a new uni joint courtesy kenn seats (f &r) - good condition, no rips or tears. some minor spots power steer - good condition panels hayman reese tow bar strut spacers 1 pair 2inch coil spacers and 1 pair 1inch coil spacers standard struts 3 flares left. 1 was torn from accident homemade snorkel - still good cos the sedan wasnt tall enough to hit it although the mount was ripped off A pillar and bottom rubber bent is bendy. heater core good condition new softtop clip/clamp - on top of windscreen all other little bits and pieces [/img]
|
|
| Author: | Derek66 [ Mon Oct 25, 2010 9:16 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
Do you have a price for the whole vehicle - |
|
| Author: | deathdoll [ Mon Oct 25, 2010 9:48 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
pm sent |
|
| Author: | remydog05 [ Mon Oct 25, 2010 8:00 pm ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
It looks like a manual by the pic?? |
|
| Author: | deathdoll [ Mon Oct 25, 2010 11:21 pm ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
yes it is a manual. |
|
| Author: | FullyZooked [ Tue Oct 26, 2010 10:11 pm ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
Is this gear still for Sale? Looking at the Towbar. Where in Vic are you? |
|
| Author: | deathdoll [ Tue Oct 26, 2010 10:14 pm ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
yes it is still for sale. Im in coburg. |
|
| Author: | FullyZooked [ Wed Oct 27, 2010 12:55 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
Can I grab your number please as I am keen on a few bits and peices. |
|
| Author: | Joe [ Wed Oct 27, 2010 1:03 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
How much for the windscrean washer motor and the washer jets and the little metal mounting tabs? |
|
| Author: | RIKSTR [ Wed Oct 27, 2010 1:31 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
How much for the whole thing? |
|
| Author: | deathdoll [ Wed Oct 27, 2010 7:56 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
PM sent to all enquiries. thanks all |
|
| Author: | SiKnEsS [ Wed Oct 27, 2010 10:17 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
hi, how much for the 2inch coil spacers and the front strut spacers, and how soon could u post? cheers Dan |
|
| Author: | deathdoll [ Thu Oct 28, 2010 8:02 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
hi for those interested in strut spacers. they are out of the car now and these are the pics.
sorry the spacers are 1.75 inches tall not 2 inches as stated before |
|
| Author: | Joe [ Thu Oct 28, 2010 8:05 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
They look like calmini ones just painted black |
|
| Author: | samb0rg [ Thu Oct 28, 2010 9:28 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
Interested in the windscreen, front drivers + passengers door trims, carby (if its in good nic) and standard exhaust manifold (if it's not cracked). And also interested in the snorkel. |
|
| Author: | atari4x4 [ Thu Oct 28, 2010 9:37 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
Joe wrote: They look like calmini ones just painted black
they aren't calamari strut spacers... where the flat bar is on those the calmini ones are a section of tube with little cut outs for where the nuts go. |
|
| Author: | Joe [ Thu Oct 28, 2010 9:40 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
atari4x4 wrote: Joe wrote: They look like calmini ones just painted black they aren't calamari strut spacers... where the flat bar is on those the calmini ones are a section of tube with little cut outs for where the nuts go. I went and had a look at my ones before but forgot to write it in here |
|
| Author: | deathdoll [ Thu Oct 28, 2010 9:40 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
they are spacers off bits4vits |
|
| Author: | gympzook [ Fri Oct 29, 2010 8:08 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
Mate I'd grab the carby off you. Any issues with fuel consumption? How was she running before the prang? |
|
| Author: | 93zook [ Fri Oct 29, 2010 8:17 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
hey mate, how much for the power steering if its still there? |
|
| Author: | deathdoll [ Fri Oct 29, 2010 8:23 am ] |
| Post subject: | Re: Wrecking 1989 G16A SWB Vitara Softop |
Gympzook. the carby was fine when it was running but it should go through a thorough clean though. i was getting almost 300ks a tank on 31s and std gears. make an offer if your interested. cheers. 93zook: sorry the power steering was sold yesterday Power Steering sold, 1 inch coil spacers and tow bar pending sale. thanks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|