| auszookers.com http://auszookers.com/forum/ |
|
| 16x8 Alloy Beadlocked rims http://auszookers.com/forum/viewtopic.php?f=7&t=16913 |
Page 1 of 1 |
| Author: | Dan502 [ Sat Nov 20, 2010 5:29 am ] |
| Post subject: | 16x8 Alloy Beadlocked rims |
Champion Alloy Beadlocked rims, 5on5.5 stud pattern, 4" backspacing, 5 of them, Really good condition, Some scratches on locking rings, Were $550 a rim to import from U.S. Will assist with courier or deliver in Brissie area. $1000ono. Note:Tyres not included 
|
|
| Author: | YNV17 [ Sun Nov 21, 2010 5:50 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
are these the same ones that were on ebay not long ago? |
|
| Author: | Dan502 [ Sun Nov 21, 2010 6:40 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
Not the same rims. The ones on eBay were mine also. I had 3 sets of them. 2 sets polished, 1 set that are powder-coated black. This is the best of the 3 sets. |
|
| Author: | oozuk [ Mon Nov 22, 2010 2:08 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
Faaaarrrrrrrkkk !!! Wish I saw these before I spent all that money getting my rims repaired, converted to beadlocks and powder coated. These look heaps cooler than mine.... Bugger |
|
| Author: | Dan502 [ Mon Nov 22, 2010 3:00 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
That's a shame. I'm open to offers. |
|
| Author: | Built4thrashing [ Mon Nov 22, 2010 3:39 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
Dan502 wrote: That's a shame. I'm open to offers.
Swap ya for some almost new 16x7 black rims and some NEW steel rims to suit the new Grand Vitara. that is if they will fit my 2000GV B4T |
|
| Author: | Dan502 [ Mon Nov 22, 2010 4:29 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
Sorry, have no use for those. I meant cash offers. Thanks anyways. |
|
| Author: | smiffkid [ Mon Nov 22, 2010 11:53 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
$800 |
|
| Author: | barneyszookin [ Mon Nov 22, 2010 12:38 pm ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
I'll give you $1000 If you cover courier down to Geelong, vic?? |
|
| Author: | Dan502 [ Mon Nov 22, 2010 12:42 pm ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
barneyszookin wrote: I'll give you $1000 If you cover courier down to Geelong, vic??
Pm sent |
|
| Author: | 16ZUK [ Tue Nov 23, 2010 8:44 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
pm sent. |
|
| Author: | just_cruizin [ Tue Nov 23, 2010 10:52 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
by 4" back spacing do you mean they have a 0 offset? |
|
| Author: | Fatzook [ Tue Nov 23, 2010 10:56 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
just_cruizin wrote: by 4" back spacing do you mean they have a 0 offset? \
I read it that way also. |
|
| Author: | Dan502 [ Tue Nov 23, 2010 11:15 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
Fatzook wrote: just_cruizin wrote: by 4" back spacing do you mean they have a 0 offset? \I read it that way also. Yes, that's right |
|
| Author: | Marco260386 [ Tue Nov 23, 2010 12:19 pm ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
i am under the impression 4 inch backspacing means -6 of set.. because rim width it determined by the hump not from where the rim ends which Determines Backspacing.. Endless Argument with myself Wait. i am also wrong https://www.rsracing.com/tech-wheel.html#backspace its -12 |
|
| Author: | oozuk [ Wed Nov 24, 2010 11:26 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
16ZUK wrote: pm sent.
Jeff do it !!! Do it !!! |
|
| Author: | Dan502 [ Wed Nov 24, 2010 1:07 pm ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
*****SOLD***** |
|
| Author: | tanshi [ Thu Nov 25, 2010 10:56 pm ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
i will expect to see pics of these on a little brown LJ soon 
|
|
| Author: | Fatzook [ Thu Nov 25, 2010 11:01 pm ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
tanshi wrote: i will expect to see pics of these on a little brown LJ soon
with 33's? 
|
|
| Author: | tanshi [ Fri Nov 26, 2010 1:45 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
32s! but close |
|
| Author: | Fatzook [ Fri Nov 26, 2010 1:56 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
tanshi wrote: 32s! but close
Cool. So has he fitted the second motor in the back? That 1L is gonna get a SERIUOS workout 
|
|
| Author: | tanshi [ Fri Nov 26, 2010 2:04 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
lol, nah with the lj50 gearing it will be ok. you coming camping in two weeks? |
|
| Author: | Fatzook [ Fri Nov 26, 2010 2:10 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
tanshi wrote: lol, nah with the lj50 gearing it will be ok.
you coming camping in two weeks? Negative 
My plate is overflowing already 
|
|
| Author: | Highway-Star [ Fri Nov 26, 2010 6:13 am ] |
| Post subject: | Re: 16x8 Alloy Beadlocked rims |
Fatzook wrote: tanshi wrote: 32s! but close Cool. So has he fitted the second motor in the back? That 1L is gonna get a SERIUOS workout Should be less work for it, as I will not be buying another set of sillystones. Something that gets me more traction in more places this time; which as a side affect will also have less rolling resistance on road .
Oh if you can find me some 5.12 1L size diffs before I buy tyres, I'll put 33's on it for you 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|