auszookers.com :: View topic - [ACT] Calmini Anvil, complete :::SOLD:::

auszookers.com http://auszookers.com/forum/

[ACT] Calmini Anvil, complete :::SOLD::: http://auszookers.com/forum/viewtopic.php?f=7&t=17471	Page 1 of 1

Author:	RIKSTR [ Sun Dec 12, 2010 9:44 pm ]
Post subject:	[ACT] Calmini Anvil, complete :::SOLD:::
ITEM: Calmini Anvil, complete with "Stan's" Toyota CV's PRICE AND PRICE CONDITIONS: :::SOLD::: CONDITION: Top REASON FOR SELLING: Building a new car and doing something different EXTRA INFO: Calmini Anvil, complete with "Stan's" Toyota CV converison and CV's and hubs. GV steel third member, ARB Air Locker, All that is needed is a compressor to run the locker. Also have the short side axle so this can be used with 2 passangers side vitara CV's if you want to. Designed for a 3" Calmini kit to have it fit the best, Calmini 3" but can be done without it. LOCATION: Canberra CONTACT: Hamish 0415 148 385 PICTURES: Further down

Author:	RIKSTR [ Thu Dec 16, 2010 8:19 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with Hagen Toyota CV's
TTT

Author:	atari4x4 [ Thu Dec 16, 2010 8:55 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with Hagen Toyota CV's
Hey Rick, do you know what has been changed/modded to get the toyota CV's onto the anvil & does the widening mod need to be done to run the CV?

Author:	RIKSTR [ Thu Dec 16, 2010 10:56 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with Hagen Toyota CV's
Yea so there are a few things involved, Going from the outside in, Toyota Locking hubs, adaptor plate, Brass bush, Toyota CV, adaptor plate, GV axles. So an adaptor plate bolts to the longside GV axle and there is a new short side axle. The widening mod does need to be done as the Toyota CV with the adaptor plate does make it longer that a stock Vit CV.

Author:	Timbo_ [ Fri Dec 17, 2010 1:51 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with Hagen Toyota CV's
yeah would love to know more about this modification. Was having a yarn last night with a mate about it. If i didnt just buy a new anvil housing i would buy this right now.

Author:	Timbo_ [ Fri Dec 17, 2010 1:55 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with Hagen Toyota CV's
what type of toyota cv is used? Might just buy one, test the waters, and see what type of mods will have to be done.

Author:	RIKSTR [ Fri Dec 17, 2010 2:42 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with Hagen Toyota CV's
Just a normal 4runner or and IFS Hilux one. At the risk of turning this into a tech thread, read all aobut it here Stan's Toyota CV kit some good pics from page 3 onwards

Author:	RIKSTR [ Mon Dec 20, 2010 7:45 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Bump

Author:	izook [ Fri Jan 28, 2011 10:02 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Hey guys, Just reminding any Vitara heads that this is still here.. If you are serious about having a hardcore IFS Vit then this setup is your best option. No more cracked diff housings, same CV for easy changing and an air locker. Can be used with stock CV's or Hilux (with widening mod). If you are going to spend big bucks on big tyres for your Vit you are crazy not to pick this up... GV Third member GV centre Anvil 3" drop housing ARB air locker Hilux CV conversion kit $2000 call 0415 148 385 or pm me Scratch on housing from bent steering rod:

Author:	RIKSTR [ Sat Jan 29, 2011 12:57 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Bump

Author:	RIKSTR [ Wed Feb 09, 2011 12:14 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit

Author:	atari4x4 [ Wed Feb 09, 2011 12:50 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
why hasn't any one bought this already... looks like it's set up to take either the Vitara CV's or the Toyota CV's

Author:	DarkHorse [ Wed Feb 09, 2011 1:18 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Want, but can't justify atm.

Author:	RIKSTR [ Wed Feb 09, 2011 2:33 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
atari4x4 wrote: why hasn't any one bought this already... looks like it's set up to take either the Vitara CV's or the Toyota CV's It will and I don't know either, there is now way to get this any cheaper. Timbo paid about $900 landed for a bare Anvil An Air locker will cost $1150 alone then you will need to get a steel GV front housing and long side axle, that will be another $500 Then there is the Toyota CV conversion that was something like $800 US, and good luck trying to find it. Then you would need to buy hubs to go with it. This front end would cost more than $3000 to set up and there are spare toyota cv's

Author:	DarkHorse [ Wed Feb 09, 2011 1:26 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Standard 5.12s loaded?

Author:	RIKSTR [ Wed Feb 09, 2011 8:09 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Yes it is

Author:	DarkHorse [ Thu Feb 10, 2011 12:08 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Damn you this is tempting... And it'd piss Joe off too if I sniped it first... PM sent.

Author:	atari4x4 [ Thu Feb 10, 2011 12:48 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
DarkHorse wrote: Damn you this is tempting... And it'd piss Joe off too if I sniped it first... PM sent. just sell Joe you're old one....

Author:	RIKSTR [ Thu Feb 10, 2011 1:09 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
pm's answered

Author:	Joe [ Thu Feb 10, 2011 5:14 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
DarkHorse wrote: Damn you this is tempting... And it'd piss Joe off too if I sniped it first... PM sent.

Author:	DarkHorse [ Thu Feb 10, 2011 5:45 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
atari4x4 wrote: DarkHorse wrote: Damn you this is tempting... And it'd piss Joe off too if I sniped it first... PM sent. just sell Joe you're old one.... That'd be the plan! Joe wrote: :thefinger:

Author:	Joe [ Thu Feb 10, 2011 6:26 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
DarkHorse wrote: atari4x4 wrote: DarkHorse wrote: Damn you this is tempting... And it'd piss Joe off too if I sniped it first... PM sent. just sell Joe you're old one.... That'd be the plan! No good to me, yours has the wrong pinon mount DarkHorse wrote: Joe wrote:

Author:	DarkHorse [ Thu Feb 10, 2011 7:56 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Joe wrote: No good to me, yours has the wrong pinon mount Same as this one - or do you have another 3rd member etc lined up?

Author:	Buddies72 [ Thu Feb 10, 2011 10:59 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
You have a PM

Author:	Joe [ Thu Feb 10, 2011 12:41 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
DarkHorse wrote: Joe wrote: No good to me, yours has the wrong pinon mount Same as this one - or do you have another 3rd member etc lined up? I didn't think that type of mount could be used with the calmini pinion mount

Author:	DarkHorse [ Thu Feb 10, 2011 3:14 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
Now I'm confused...

Author:	RIKSTR [ Thu Feb 10, 2011 8:08 pm ]
Post subject:	Re: [ACT] Calmini Anvil, complete with bonus Toyota CV's kit
:::PENDING:::

Author:	atari4x4 [ Fri Feb 11, 2011 1:58 am ]
Post subject:	Re: [ACT] Calmini Anvil, complete :::PENDING:::
about time someone got onto this....

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/