auszookers.com
http://auszookers.com/forum/

[VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
http://auszookers.com/forum/viewtopic.php?f=7&t=20217		 Page 1 of 1
Author:  PJ.zook [ Mon Mar 21, 2011 11:08 am ]
Post subject:  [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
Im selling a complete G16B MPFI coilpack ignition that is already in a Sierra and running. All you need to get it to run is to transplant it into your Sierra.

-Comes complete with engine itself
-Vitara exhaust manifold (will throw in rest of exhaust system too, its a custom 2" system that dumps out infront of drivers side rear wheel)
-Wiring loom and computer
-Custom airbox and stainless snorkel
-Both front guards (I have done virtual lift mod too)
-Radiator with AU thermofan
-Conversion plate I made to mate engine to Sierra gearbox (will throw in gearbox too)
-Speco gauges
-Custom graft of Baleno gauges into Sierra cluster (have not completed speedo sensor conversion, engine doesnt need it to run)
-Fuse boxes
-High capacity Ford alternator conversion
-Heaps more, stuff I cant think of at the moment.

Image

Image

Image

Image

Image

Image

Image

Engine is still in car too so you can hear running and test drive.

Car is in Glen Waverley.

I want $3500.
Author:  atari4x4 [ Mon Mar 21, 2011 11:11 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
:wink: $?
Author:  vl2dy4 [ Mon Mar 21, 2011 11:12 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
How much you want for this setup mate can you send it too Bunbury WA 6233, if so what will the costs be.

Cheers

Conrad
Author:  sbyard [ Mon Mar 21, 2011 3:14 pm ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
Hey Conrad, you not happy with your engine? I'll take it if you grab this one
Author:  PJ.zook [ Fri Apr 01, 2011 2:04 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
Just added pictures and more info.
Author:  anDy86 [ Fri Apr 01, 2011 4:03 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
good luck with the sale mate
wish my wallet was fatter these days.
Author:  PJ.zook [ Fri Apr 01, 2011 4:09 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
Im about to get a mortgage, so the zook is goin heh, no more fat wallet days of spending whatever I liked. It doesn't have to sell, can stay as my plaything, but would help funds.
Author:  gilly [ Fri Apr 01, 2011 6:13 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Si
just the engine setup and gearbox or is it the whole lot?
Author:  PJ.zook [ Fri Apr 01, 2011 11:05 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
Pretty much what I have mentioned in the first post mate, thats everything to do with the engine, not the whole car. Theres too much CrMo in the driveline to give it away for $3500 lol
Author:  shakes [ Sun May 01, 2011 11:18 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
Did you end up moving this PJ?

A little interested in just your gaurds and snorkel to save me spending a day on the MIG. how much coin would you want?
Author:  vl2dy4 [ Sun May 01, 2011 3:03 pm ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
what air box is that mate?
Author:  Fatzook [ Sun May 01, 2011 3:31 pm ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Si
Can I ask why you are selling?
Author:  foolsp33d [ Sun May 01, 2011 3:41 pm ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
Fatzook wrote:
Can I ask why you are selling?

PJ.zook wrote:
Im about to get a mortgage, so the zook is goin heh, no more fat wallet days of spending whatever I liked. It doesn't have to sell, can stay as my plaything, but would help funds.


PJs i pretty softly spoken... :lol:

what xfer are you running PJ? may be interested in the bothboxs if they ok!?
Author:  PJ.zook [ Sun May 01, 2011 8:58 pm ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
shakes wrote:
Did you end up moving this PJ?

A little interested in just your gaurds and snorkel to save me spending a day on the MIG. how much coin would you want?


I made the snorkel to fit directly onto the different airbox, not the suzuki airbox, so you might have to fiddle, but yes I will separate. Give me a ring.




vl2dy4 wrote:
what air box is that mate?


I have no idea what it was out of, an old Nissan I think, I just wandered around the wreckers looking for an airbox that was steel so I could modify it easily, and found this one. It was perfect. Fitted exactly where I wanted, was all steel, and it takes a Commodore panel filter!!




Fatzook wrote:
Can I ask why you are selling?


As fool said, im getting a mortgage (as soon as the damn solicitor finishes the paperwork). I have a Pathfinder which im only doing minor mods to, and using that as my offroader.




foolsp33d wrote:
what xfer are you running PJ? may be interested in the bothboxs if they ok!?


Its running standard transfer with crawlers, but that has already been promised to someone else. Gearbox is fine, was planning on selling that with engine though as its modded to mate with the G16B.
Author:  PJ.zook [ Sun May 01, 2011 9:08 pm ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
BTW I can separate bits, but everything thats needed to run engine will not be separated from engine itself. PM me or ring me to discuss price, whatever 0438858325
Author:  PJ.zook [ Wed Jun 08, 2011 8:37 am ]
Post subject:  Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra
Selling engine now for $2000 for engine, gearbox and everything needed to run engine, I cant be bothered moving it to new house, engine alone cost me $1500.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/