auszookers.com
http://auszookers.com/forum/

highly modified sierra with engineers cert
http://auszookers.com/forum/viewtopic.php?f=7&t=20592		 Page 1 of 1
Author:  kaos0421 [ Fri Apr 01, 2011 7:01 pm ]
Post subject:  highly modified sierra with engineers cert
Up for sale is my 1994 Suzuki Sierra, with engineer certificate.
This car is awesome the only reason im selling it is because im travelling Aus later this year and it wont tow the van. I go out with 2 patrol turbo off their tits running 37s and it keeps up no dramas. It is ready to go nothing to spend.
It was built by 4play offroad and i have receits for just about all the stuff done even from previous owners, it would be close to $28000

TYRES
4x 33/12.5/15 mongrels %80 with 1 bald spare

ENGINE/DRIVELINE
1.6 litre G16A Vitara Engine (low Kms)
Hilux drive shafts
RUF Spring over conversion. Springs replaced with new 800kms ago.
Anti warp bars
Toyota steering box
Rear lockrite locker
Samuri diff gaurds
Slotted front discs
Extended braided brake lines
2 inch body lift
Rocky road upgraded transfer case arm
Rock hopper series 3 gears(super low)
Rocky road jpeater suspension conversion
Rancho adjustable shocks all round with in cab kit
Upgraded 110A falcon alternator
Optima battery
Chromolly CVS
50mm wheel spaces
Tow bar

BODY
brand new full top for show, old full top for 4wding winter, bikini top for 4wding summer
3 inch stainless snorkel
6 point roll cage
Fuel tank protector
ARB bulbar with 12 pound winch with 30mt dyneema rope
INTERIOR
5 point harness with bucket seats
Sports steering wheel
Polyurethane painted inside (hose out interior)
Checkerplate toolbox
Battery cut out switch
Fuel/air ratio meter

Asking price is $9000. No RWC supplied but i had it done when i bought it 12 months ago as you see it with 31s on and can point you in the right direction to get it done.
feel free to call with any questions or to view 0421 225 130.


Image

Image

Image

Image

Image
Author:  lump_a_charcoal [ Fri Apr 01, 2011 8:36 pm ]
Post subject:  Re: highly modified sierra with engineers cert
Nice rig, but what's with the tyre treads?

I don't remember taking any acid...
Author:  stockman [ Fri Apr 01, 2011 8:45 pm ]
Post subject:  Re: highly modified sierra with engineers cert
It's a photobucket thing.
If you look at some of my photos photobucket have randomly added swirls and dots.
Author:  abclarke [ Sat Apr 02, 2011 3:05 am ]
Post subject:  Re: highly modified sierra with engineers cert
Never done it to me :?
Author:  lump_a_charcoal [ Sat Apr 02, 2011 4:22 am ]
Post subject:  Re: highly modified sierra with engineers cert
It is a photoshop thing, photobucket don't mod your pics.
Author:  abclarke [ Sat Apr 02, 2011 4:25 am ]
Post subject:  Re: highly modified sierra with engineers cert
Plus its kinda odd its just on the tyre tread ;)
Author:  lump_a_charcoal [ Sat Apr 02, 2011 4:29 am ]
Post subject:  Re: highly modified sierra with engineers cert
Bald tyres maybe?
Author:  MacDaddy [ Sat Apr 02, 2011 6:39 am ]
Post subject:  Re: highly modified sierra with engineers cert
Is that a drip tray under it in the side on pic...
Author:  Coastline [ Sat Apr 02, 2011 7:39 am ]
Post subject:  Re: highly modified sierra with engineers cert
Haha my old rig is up for sale again. Its not worth 9000
Author:  Coastline [ Sat Apr 02, 2011 7:46 am ]
Post subject:  Re: highly modified sierra with engineers cert
I liked it better with my white wheels...
Author:  lump_a_charcoal [ Sat Apr 02, 2011 8:23 am ]
Post subject:  Re: highly modified sierra with engineers cert
Coastline wrote:
Haha my old rig is up for sale again. Its not worth 9000


Come on dude, it is a free market...
Author:  shakes [ Sat Apr 02, 2011 9:22 am ]
Post subject:  Re: highly modified sierra with engineers cert
lump_a_charcoal wrote:
Coastline wrote:
Haha my old rig is up for sale again. Its not worth 9000


Come on dude, it is a free market...


If it's as tidy as it looks in the photo's and everything is engineered then 9k is a good starting price if he's in no rush to sell it.
Author:  Coastline [ Sat Apr 02, 2011 10:01 am ]
Post subject:  Re: highly modified sierra with engineers cert
This was a weapon in the bush, shouldnt of sold it..
Author:  kaos0421 [ Sat Apr 02, 2011 11:40 am ]
Post subject:  Re: highly modified sierra with engineers cert
The tyres have the swirls on them because they arnt the tyres i was selling with it the tyres are the 4x33 inch mongrels + 1 spare

The drip tray is because when i bought it it had a crack in the transfere case which is now been replaced the only leak is a very slight one from the gearbox shaft but it doesnt drop on the ground

Since i purcased the car the spings have been replaced with new
Has had the wiring cleaned up with redundent wiring removed and hose and rubber protection for all wiring
The DIY bumpstops and diff breathers replaced
Wheel flares installed
New full cover purchased
Faulty UHF replaced
Toolbox installed



Other tyres available for sale with extra cash with the car are
5x simex jungle treckers 33x11.5x15 on rims
4x brand new did 100 km for rwc buckshot mud terrains on rims
Author:  kaos0421 [ Sat Apr 02, 2011 11:47 am ]
Post subject:  Re: highly modified sierra with engineers cert
Try to get an engineers these days with a spring over conversion i tried before i bought this car and its pritty much impossible with the laws getting tighter the way they are. Not many cars out there that are legal and you can laugh at the cops if you get pulled over.

Also replaced the winch with a 12000 pound job with in cab controls
Author:  lump_a_charcoal [ Sat Apr 02, 2011 12:00 pm ]
Post subject:  Re: highly modified sierra with engineers cert
You don't have to justify it mate, it looks like a solid rig, with papers.
Author:  kaos0421 [ Mon Apr 04, 2011 7:40 am ]
Post subject:  Re: highly modified sierra with engineers cert
im going away for a while in 2 weeks would like to move it before then
will sell it with all 3 sets of tyres for say $9999
Author:  Ben_Sierra [ Mon Apr 11, 2011 3:15 pm ]
Post subject:  Re: highly modified sierra with engineers cert
http://auszookers.com/index.php?name=Fo ... 197#360197
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/