| auszookers.com http://auszookers.com/forum/ |
|
| Wrecking 1 Litre hard top Sierra http://auszookers.com/forum/viewtopic.php?f=7&t=22251 |
Page 1 of 2 |
| Author: | 2stroker [ Wed May 25, 2011 12:14 am ] |
| Post subject: | Wrecking 1 Litre hard top Sierra |
I picked up a 1 Litre hardtop last night, I will start wrecking it out on the weekend, it is a bit rusty but it is complete, plenty of good bits available. It has a bullbar, it has sliders, 1Litre transfer with 4x4 light swith North Brisbane. |
|
| Author: | reeceh [ Wed May 25, 2011 1:18 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Hey 2stroke could you please pm me details about sliders |
|
| Author: | tonyevans [ Wed May 25, 2011 1:29 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Whats the Bull bar 2stroker? Cheers - Tony |
|
| Author: | Scrawny [ Wed May 25, 2011 1:52 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Ain't gonna be any Tintops left shortly |
|
| Author: | 5ierra [ Wed May 25, 2011 1:54 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
what sort/how much for the grille? |
|
| Author: | 2stroker [ Wed May 25, 2011 6:51 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
5ierra wrote: what sort/how much for the grille?
Mate its a 1 litre which looks like this, however Hotshot may already be taking it.
I also have 1300 grilles as well if that is what you are after??
|
|
| Author: | 2stroker [ Wed May 25, 2011 6:53 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Tony and reeceh I have sent you both PMs |
|
| Author: | reeceh [ Wed May 25, 2011 7:00 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
pm replied to thanks |
|
| Author: | kris_phillips528 [ Wed May 25, 2011 7:42 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
hey 2 stroker could you please pose another pic of the bullbar. thanks |
|
| Author: | 2stroker [ Wed May 25, 2011 9:05 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Mate it's an old school 4 poster, galvanised steel not rusty or bent, bolts to original mounts GONE |
|
| Author: | russty_2008 [ Wed May 25, 2011 9:37 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
hey mate im after a 1 litre airbox |
|
| Author: | 2stroker [ Wed May 25, 2011 11:59 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Hi russty_2008, PM sent to you mate |
|
| Author: | suzooky87 [ Wed May 25, 2011 4:29 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
How much for the transfer? |
|
| Author: | Chaybra [ Wed May 25, 2011 4:38 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Is it a high top? Looking for the roof section x2 and rear section...if that makes sense |
|
| Author: | 2stroker [ Wed May 25, 2011 11:23 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
suzooky87 wrote: How much for the transfer?
It is a late model 4x4 light switch transfer - $250 |
|
| Author: | 2stroker [ Wed May 25, 2011 11:24 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Chaybra wrote: Is it a high top? Looking for the roof section x2 and rear section...if that makes sense
Sorry mate no it's not a high top. |
|
| Author: | 2stroker [ Fri May 27, 2011 1:48 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
russty_2008 wrote: hey mate im after a 1 litre airbox
Air box is off and ready to be picked up. |
|
| Author: | danw [ Fri May 27, 2011 3:18 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
what sort of condition are the doors in mate? |
|
| Author: | 2stroker [ Fri May 27, 2011 12:41 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
danw wrote: what sort of condition are the doors in mate?
Doors are pretty straight, little bit of rust in the bottoms easy repair, bare doors without door trims, handles, glass or winder mechanisms $20 each or $30 for the pair. |
|
| Author: | kris_phillips528 [ Sat May 28, 2011 3:49 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
How much for the bullbar |
|
| Author: | kris_phillips528 [ Sat May 28, 2011 4:47 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
also could you please send through a pic of the sliders? if they are in good condition.. how much would you like for the bullbar and sliders? thanks |
|
| Author: | 2stroker [ Sun May 29, 2011 5:29 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Sliders are sold. Bullbar is in good condition no dents no rust - $80 |
|
| Author: | tanshi [ Sun May 29, 2011 8:07 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
what year is the car? |
|
| Author: | kris_phillips528 [ Sun May 29, 2011 11:17 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
would you take $60 for it tomorrow? |
|
| Author: | 2stroker [ Sun May 29, 2011 12:57 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
tanshi wrote: what year is the car?
It is a 1982 |
|
| Author: | 2stroker [ Sun May 29, 2011 1:01 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
kris_phillips528 wrote: would you take $60 for it tomorrow?
Mate I have just sold the indicators out of it (which are just the standard front suzuki bumper bar indicators) so yeah if you can put your own indicators in it I will take $60 for the bullbar. I am on days off Tues and Wed so it will be ready for pickup from Tues arvo if you want it. |
|
| Author: | kris_phillips528 [ Sun May 29, 2011 10:08 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Sure, sounds good |
|
| Author: | 2stroker [ Wed Jun 01, 2011 12:37 am ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Hi kris_phillips528 the bullbar is off and waiting to be picked up BULLBAR - GONE Thanks |
|
| Author: | hooki [ Sat Jun 04, 2011 4:20 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
you wouldnt happen to have a rear view mirror? |
|
| Author: | 2stroker [ Sun Jun 05, 2011 10:59 pm ] |
| Post subject: | Re: Wrecking 1 Litre hard top Sierra |
Sorry mate it went |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|