| auszookers.com http://auszookers.com/forum/ |
|
| vit part out, 95 off to scrap this week!!! http://auszookers.com/forum/viewtopic.php?f=7&t=23130 |
Page 1 of 3 |
| Author: | jonno_racing [ Wed Jun 22, 2011 7:17 am ] |
| Post subject: | vit part out, 95 off to scrap this week!!! |
hey guys parting out another vit.. 160,000km G16b manual air con. all the usual vit stuff. rust in body (Reason for parting) nothing is spoken for. plz pm me offers etc for motor etc..
|
|
| Author: | alexvitara [ Wed Jun 22, 2011 8:19 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
PM'd |
|
| Author: | Teracis [ Wed Jun 22, 2011 8:28 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
How much do you want for the fuel tank and pump? Also, depending on what alex is asking for, split shipping? |
|
| Author: | jonno_racing [ Wed Jun 22, 2011 8:34 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
Pm's replied to. thanks guys. |
|
| Author: | shep [ Wed Jun 22, 2011 11:32 pm ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
how much for the car, going and complete? |
|
| Author: | jonno_racing [ Wed Jun 22, 2011 11:46 pm ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
not interested in selling complete sorry. |
|
| Author: | jonno_racing [ Thu Jun 23, 2011 10:01 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
p/s sold! |
|
| Author: | Rusho [ Thu Jun 23, 2011 10:04 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
What do you want for the 1600, loom and ecu?? |
|
| Author: | Brett [ Thu Jun 23, 2011 10:14 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
you have a pm |
|
| Author: | shep [ Thu Jun 23, 2011 10:24 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
jonno_racing wrote: not interested in selling complete sorry.
how else am i going to put some hilux diffs in the back and drive it home? |
|
| Author: | ZookiMonsta [ Thu Jun 23, 2011 10:39 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
Rusho wrote: What do you want for the 1600, loom and ecu??
Mine! |
|
| Author: | jonno_racing [ Thu Jun 23, 2011 10:41 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
MOTOR sold. fuel tank sold. sorry shep we sold the lux diffs 2 |
|
| Author: | jonno_racing [ Thu Jun 23, 2011 10:43 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
dosnt any one want the fully awsome alloys? LOL |
|
| Author: | atari4x4 [ Thu Jun 23, 2011 10:46 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
how much for the front diff, posted to SA? don't need the housing. |
|
| Author: | jonno_racing [ Thu Jun 23, 2011 10:58 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
what do they weigh gus? send me a pm mate. |
|
| Author: | jonno_racing [ Sun Jun 26, 2011 11:05 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
bump this up, this is the model with the big calipers etc... |
|
| Author: | royce [ Sun Jun 26, 2011 11:09 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
roof racks? |
|
| Author: | jonno_racing [ Sun Jun 26, 2011 11:53 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
yep mate will get some pics in morning for you. a few people have asked about them. |
|
| Author: | jonno_racing [ Mon Jun 27, 2011 4:26 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
here you go guys
|
|
| Author: | Friski [ Mon Jun 27, 2011 4:32 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
Hi, Could you confirm if the front headlamps will fit a 91 swb, if so how much are you asking for both? Cheers, Mic |
|
| Author: | jonno_racing [ Mon Jun 27, 2011 4:47 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
not at all sure. $65+post. one has some damage. pm me 4 info. |
|
| Author: | royce [ Mon Jun 27, 2011 4:53 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
Do you have the end bits for the tracks? Are they 1400 or 1200mm long? How did they attach to the roof? How much posted to 4009? |
|
| Author: | jonno_racing [ Mon Jun 27, 2011 5:20 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
not sure on length, yeah the end to the rails is there. they rivit down. they are rino racks. $150+post id say 25 will cover it |
|
| Author: | royce [ Mon Jun 27, 2011 5:26 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
$130 posted and ill send you the money today |
|
| Author: | jonno_racing [ Mon Jun 27, 2011 5:46 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
royce wrote: $130 posted and ill send you the money today
sorry you wernt the first to ask. and a few others are before you. |
|
| Author: | royce [ Mon Jun 27, 2011 5:51 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
hope they are genuine cause I have a short attention span Friski, I have a cheaper set of lights than that in Bris if you are interested |
|
| Author: | jonno_racing [ Mon Jun 27, 2011 7:04 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
thats ok royce i am sure i wont have much problem shifting them. |
|
| Author: | Fatzook [ Mon Jun 27, 2011 7:36 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
jonno_racing wrote: thats ok royce i am sure i wont have much problem shifting them.
Money talks, bullshit walks. First to pay should get the item. Maybe Royces cash ain't good enough for you?
|
|
| Author: | jonno_racing [ Mon Jun 27, 2011 7:50 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
royce's cash is fine, his low ball however is less that what i had been offered. if i don't here back from any one elce in the next few days there his. |
|
| Author: | deathdoll [ Mon Jun 27, 2011 10:13 am ] |
| Post subject: | Re: vit part out, 95 G16B, ps etc etc take 2 |
Is your front driver door trim in good condition? |
|
| Page 1 of 3 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|