| auszookers.com http://auszookers.com/forum/ |
|
| [nsw] 235/75/16's on 16x6.5 inch alloys $200 http://auszookers.com/forum/viewtopic.php?f=7&t=24996 |
Page 1 of 1 |
| Author: | drewhoo [ Sun Aug 21, 2011 7:33 am ] |
| Post subject: | [nsw] 235/75/16's on 16x6.5 inch alloys $200 |
Hi Guys I won these 5 tyres and picked them up today. 16x6.5 alloys with 235/70/16 and used michelins (2-3mm tread on 4, spare not legal). Came off the blokes vitara, turns out the offset is too positive for my jimny's tie rod ends $200 all yours. Ideally, Also I'm still after rims and tyres that actually fit my jimny around the 235/75/15 or 16 range if anybody wants a swap Pickup at Maroubra. Cheers, Drew |
|
| Author: | nato78 [ Sun Aug 21, 2011 7:37 am ] |
| Post subject: | Re: [nsw] 235/75/16's on 16x6.5 inch alloys - vitara,sierra,etc |
Why don't you keep the tyres and just get new rims in a bigger offset? You can pick up new king rims for about $60 each, then just sell the alloys |
|
| Author: | drewhoo [ Sun Aug 21, 2011 8:11 am ] |
| Post subject: | Re: [nsw] 235/75/16's on 16x6.5 inch alloys - vitara,sierra, |
happy to make that a third option, wouldnt know the first thing about using a tyre iron but cant be that hard can it? if anybody wants rims only - $200 |
|
| Author: | matty_wall [ Sun Aug 21, 2011 9:31 am ] |
| Post subject: | Re: [nsw] 235/75/16's on 16x6.5 inch alloys - vitara,sierra,etc |
If you can get 16 inch sunnies for $60 each your laughing! ive never seen them that cheap. |
|
| Author: | drewhoo [ Mon Aug 22, 2011 12:41 am ] |
| Post subject: | Re: [nsw] 235/75/16's on 16x6.5 inch alloys - vitara,sierra,etc |
Just called - sunnies 16x7's are $85 at tyrepower botany. Not bad but I'll wait on this thread see what people have |
|
| Author: | drewhoo [ Wed Aug 24, 2011 8:28 am ] |
| Post subject: | Re: [nsw] 235/75/16's on 16x6.5 inch alloys - vitara,sierra,etc |
drop to $200 the lot, i'll put them on ebay too, but if anybody wants them let me know asap and i'll pull the auction. lesson learnt cant run spacers legally and check the bloody offset :p cheers, drew |
|
| Author: | Built4thrashing [ Wed Aug 24, 2011 9:17 am ] |
| Post subject: | Re: [nsw] 235/75/16's on 16x6.5 inch alloys $200 |
If you were closer i'd snap them up |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|