| auszookers.com http://auszookers.com/forum/ |
|
| [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra http://auszookers.com/forum/viewtopic.php?f=7&t=25335 |
Page 1 of 1 |
| Author: | PJ.zook [ Thu Sep 01, 2011 9:20 am ] |
| Post subject: | [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
Im selling a complete G16B MPFI coilpack ignition that is already in a Sierra and running. All you need to get it to run is to transplant it into your Sierra. Engine and gearbox are already out of sierra, pics were taken while zook was still complete before I stripped it for parts. Everything is labelled and ready to plug in. -Comes complete with engine itself -Vitara exhaust manifold (will throw in rest of exhaust system too, its a custom 2" system that dumps out infront of drivers side rear wheel) -Wiring loom and computer -Radiator with AU thermofan -Conversion plate I made to mate engine to Sierra gearbox (will throw in gearbox too) -Custom graft of Baleno gauges into Sierra cluster (have not completed speedo sensor conversion, engine doesnt need it to run) -Fuse boxes -High capacity Ford alternator conversion -Heaps more, stuff I cant think of at the moment. If you are interested, give me a ring 0438858325. Car is in Hampton Park, VIC (Near Dandenong) Want $1500 cash. |
|
| Author: | sogone [ Thu Sep 01, 2011 9:30 am ] |
| Post subject: | Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
Happy to freight? |
|
| Author: | PJ.zook [ Thu Sep 01, 2011 9:54 am ] |
| Post subject: | Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
Yeh can freight, suggest using e-go.com.au as its farking cheap, and depot is 5min from me. Can put on pallet and wrap. Forgot to mention too, engine does use a little oil when pushed (like at full throttle getting up a slippery clay hill). |
|
| Author: | sogone [ Thu Sep 01, 2011 10:16 pm ] |
| Post subject: | Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
Still waiting for a text back bud. |
|
| Author: | sogone [ Sat Sep 03, 2011 11:45 am ] |
| Post subject: | Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
Sold pending |
|
| Author: | bohuler [ Sat Sep 03, 2011 11:50 am ] |
| Post subject: | Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
Wooooo! Hopefully this motivates PJ to sell me his seats and subaru forester master cylinder upgrade while he is sellling you your stuff Dave p.s congrats on the good buy mate, i've seen this zook in action and its an awsome motor that pushes it along!!! |
|
| Author: | sogone [ Sat Sep 03, 2011 11:55 am ] |
| Post subject: | Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
Been in constant talks with Peter. Hopefully he swings me the snorkel and airbox for a good price to save me the worry. |
|
| Author: | Built4thrashing [ Sun Sep 04, 2011 12:40 am ] |
| Post subject: | Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
woohoo. |
|
| Author: | sogone [ Wed Sep 14, 2011 9:29 am ] |
| Post subject: | Re: [VIC] G16B MPFI Coilpack engine frontcut already in a Sierra |
Mwahahaha. Sold |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|