auszookers.com
http://auszookers.com/forum/

Need some help, with my 1993 sierra.
http://auszookers.com/forum/viewtopic.php?f=7&t=25402
Page 1 of 1

Author:  haurp00ned [ Sat Sep 03, 2011 10:29 pm ]
Post subject:  Need some help, with my 1993 sierra.

heyy guys, i just went out and got myself a 1993 suzuki sierra and was just wondering about a few things that use might be able to help me with.

first off all the headlights on it don't seem to be working i have checked all the wiring and stuff and im not to sure on what it is, would anyone be able to help??
another thing is that i have 31x10.5x15", and when i turn the wheels they attend to scrub on the inner of the guards. The guy that i got it off told me that it had a 2inch lift on it but im not to sure if it does or not :/

Thanks. hope use will be able to help me.

Author:  tobeszook [ Sat Sep 03, 2011 10:35 pm ]
Post subject:  Re: Need some help, with my 1993 sierra.

This should be in Suzuki talk mate !

Author:  tobeszook [ Sat Sep 03, 2011 10:35 pm ]
Post subject: 

.

Author:  zuk_244 [ Sat Sep 03, 2011 11:19 pm ]
Post subject:  Re: Need some help, with my 1993 sierra.

Did you check the fuses and globes for the headlights?
I know its uncommon to blow 2 globes at once but if you have water in the headlights and turn them on it will shatter the globes, so it can happen.
If there all good get a multi meter or test light. One pin on the plug should have power (to ground) all the time, then the other 2 switch to ground through the light switch.

With the wheels have a look at where it scrubs and you might be able to bash it back abit with a hammer. 31s sound abit big for only a 2inch lift, mines got over 4inch of lift and runs 31s just nice. Also if its a spring lift they will tend to sag after a while.

Author:  mrgtt34 [ Sun Sep 04, 2011 11:40 pm ]
Post subject:  Re: Need some help, with my 1993 sierra.

hey there i have the same isue with my lights and i found burnt pins at the connector behind the glove box.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/