I'm very keen,
PM Sent
| auszookers.com http://auszookers.com/forum/ |
|
| g16b engine (nsw) pic $200 http://auszookers.com/forum/viewtopic.php?f=7&t=26321 |
Page 1 of 1 |
| Author: | Brett [ Sun Oct 02, 2011 12:56 am ] |
| Post subject: | g16b engine (nsw) pic $200 |
i have a g16b engine that i was going to slowly rebuild but the engine in my car need's to replace mine now, so i'm buying a low k import one. there is no point in me ending up with 3 g16b engines. it needs a rebuild, was smokey but running when pulled out. pretty sure i have the loom, ecu inlet, injectors, alt and power steering pump. i'll have to go move some stuff in the garage and check what is there. $200 |
|
| Author: | 94BAZOOKA [ Sun Oct 02, 2011 1:42 am ] |
| Post subject: | Re: g16b engine (nsw) |
Pm sent |
|
| Author: | Brett [ Sat Oct 08, 2011 8:12 am ] |
| Post subject: | Re: g16b engine (nsw) |
bump |
|
| Author: | jimbo_jones [ Sat Oct 08, 2011 8:35 am ] |
| Post subject: | Re: g16b engine (nsw) |
what year is it out of and aprox kms? |
|
| Author: | Brett [ Sat Oct 08, 2011 6:18 pm ] |
| Post subject: | Re: g16b engine (nsw) |
dont know how many k's it had on it, was over 200 when it was pulled i think. and it was out of a 92 lwb |
|
| Author: | Brett [ Sun Oct 30, 2011 7:14 am ] |
| Post subject: | Re: g16b engine (nsw) |
bump and price drop to $200 |
|
| Author: | jimbo_jones [ Sun Oct 30, 2011 9:39 am ] |
| Post subject: | Re: g16b engine (nsw) |
is it inj and dose it come with a computer and wiring? my mates chasing one |
|
| Author: | Brett [ Sun Oct 30, 2011 8:49 pm ] |
| Post subject: | Re: g16b engine (nsw) |
Yes its injected and the wiring and computer should be there, |
|
| Author: | shane1992 [ Mon Oct 31, 2011 12:12 am ] |
| Post subject: | Re: g16b engine (nsw) |
Is this available still? |
|
| Author: | Brett [ Mon Oct 31, 2011 1:23 am ] |
| Post subject: | Re: g16b engine (nsw) |
Yes |
|
| Author: | Brett [ Thu Nov 03, 2011 5:13 am ] |
| Post subject: | Re: g16b engine (nsw) |
just went thru to see what there is there is a powersteering pump and mount starter motor alt dizzy inlet maniflod, throttle, injectors and fuel rail fly wheel and clutch wiring x2 computers one is denso one is a Mitsubishi have a look at the pics (the powersteering and starter arent in the pics people can call me on 0424 187 716 |
|
| Author: | buzbox [ Thu Nov 03, 2011 6:32 am ] |
| Post subject: | Re: g16b engine (nsw) pic $200 |
I'm very keen, PM Sent
|
|
| Author: | Brett [ Sat Nov 05, 2011 12:35 am ] |
| Post subject: | Re: g16b engine (nsw) pic $200 |
Sold |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|