Did you get new rotors? We can take the ID of these out a bit on the lathe if you want?
Shed night should be a goer next week
| auszookers.com http://auszookers.com/forum/ |
|
| [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Beer http://auszookers.com/forum/viewtopic.php?f=7&t=27051 |
Page 1 of 1 |
| Author: | Buddies72 [ Sun Oct 23, 2011 10:27 am ] |
| Post subject: | [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Beer |
OK, so i have two Sierra Front Rotors sitting here going to waste. Bought them off ebay. Sierra Rotors - 4wd_products They are protex brand, only 1 was opened for a trial fit whilst doing a rear disc conversion on my Vitara. The only reason I am selling them is because the inside diameter of the rotor is too small to fit over my axles. Cost me over $100 including delivery - Swap for 30 can block of Tooheys New. Pickup only. Near Archerfield Brisbane. |
|
| Author: | Buddies72 [ Mon Oct 24, 2011 9:52 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Pickup Only $70 |
Bump |
|
| Author: | Buddies72 [ Tue Oct 25, 2011 10:07 pm ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Pickup Only $70 |
Bump |
|
| Author: | Buddies72 [ Tue Nov 01, 2011 9:35 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Beer |
Bump |
|
| Author: | Damo [ Wed Nov 02, 2011 1:44 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Bee |
Did you get new rotors? We can take the ID of these out a bit on the lathe if you want? Shed night should be a goer next week
|
|
| Author: | Buddies72 [ Wed Nov 02, 2011 2:06 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Bee |
Damo wrote: Did you get new rotors? We can take the ID of these out a bit on the lathe if you want?
Shed night should be a goer next week Yep, already bought replacements & installed. Can't understand why no-one wants these? |
|
| Author: | Damo [ Wed Nov 02, 2011 2:23 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Bee |
Buddies72 wrote: Damo wrote: Did you get new rotors? We can take the ID of these out a bit on the lathe if you want? Shed night should be a goer next week Yep, already bought replacements & installed. Can't understand why no-one wants these? Only because i'm in shed clean-out mode still 
|
|
| Author: | Buddies72 [ Wed Nov 02, 2011 2:24 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Bee |
Damo wrote: Buddies72 wrote: Damo wrote: Did you get new rotors? We can take the ID of these out a bit on the lathe if you want? Shed night should be a goer next week Yep, already bought replacements & installed. Can't understand why no-one wants these? Only because i'm in shed clean-out mode still Only because you want to find something.... As soon as you find it you'll stop again... 
|
|
| Author: | Mickc [ Wed Nov 02, 2011 9:45 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Bee |
 will they fit a 97 coily ?
|
|
| Author: | Buddies72 [ Wed Nov 02, 2011 10:16 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Bee |
Mickc wrote: :helloo: will they fit a 97 coily ?
Don't know. Check the link above. The part no is DR510 if that helps. |
|
| Author: | cedargrovezook [ Fri Nov 04, 2011 12:11 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Beer |
hey mate u still got the rotors ill give ya box of beer for em |
|
| Author: | Buddies72 [ Fri Nov 04, 2011 12:35 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Beer |
cedargrovezook wrote: hey mate u still got the rotors
ill give ya box of beer for em No problem, sounds good. I'm away this weekend on a trip, won't be back until Monday night. Will send you a pm with contact details when I get back. Cheers. |
|
| Author: | cedargrovezook [ Fri Nov 04, 2011 12:37 am ] |
| Post subject: | Re: [QLD] 2 x Sierra Front Rotors - Brand new - Swap For Beer |
no dramas talk to you then ..thanx |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|