auszookers.com
http://auszookers.com/forum/

5.12 centre
http://auszookers.com/forum/viewtopic.php?f=7&t=27090
Page 1 of 1

Author:  mr.green [ Tue Oct 25, 2011 1:31 am ]
Post subject:  5.12 centre

hi all, i have a 5.12 vit front centre here that has been left over from a wreck. the rear mount ( near the pinion ) is broken so would suit a sierra or swap gears if you need them for vit.

located in Tamworth 2340 but happy to post at your cost or if you only want the gears it will make post cheaper again.
gears are inexcellent condition.

contact via pm or txt 0407927531. you can ring but work is a bit all over the place so i may not answer straight away.

$150.


Airflow snorkle to suit sierra. looks too hard core for my mall cruiser $130 +postage
the snorkle is second hand and does not have the engine bay ducting, just the main tube and head

also have a arb winch bar, i bought this a few years ago for $475 and its been under th house since. after trialing it on the project i have decided to sell it and start from scratch. it has been modded for a body lift. check the photos, its not the best one out there but it could be made presentable with a bit of effort.
$350

Jason.Image
Image
Image
Image
Image

Author:  mr.green [ Wed Oct 26, 2011 8:28 am ]
Post subject:  Re: ARB winch bar, airflow snorkel, 5.12 centre

:helloo:

edit and added a bullbar to the list

Author:  sbbunno [ Wed Oct 26, 2011 1:40 pm ]
Post subject:  Re: ARB winch bar, airflow snorkel, 5.12 centre

Were a bouts is tams worth ?
I'm interested in the bar if it can be posted to 6226 (bunbury wa)

Author:  mr.green [ Thu Oct 27, 2011 2:26 am ]
Post subject:  Re: ARB winch bar, airflow snorkel, 5.12 centre

snorkle sold pending payment

Author:  jimbo_jones [ Thu Oct 27, 2011 5:52 am ]
Post subject:  Re: ARB winch bar, airflow snorkel, 5.12 centre

mr.green wrote:
snorkle sold pending payment


if it falls through pm me

Author:  mr.green [ Wed Nov 02, 2011 10:15 pm ]
Post subject:  Re: 5.12 centre

snorkel and bar gone, bump on the 5.12 :helloo:

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/