| Author |
Message |
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
 Posted: Tue Nov 22, 2011 12:30 am |
|
|
Front bar and Engine are back for Sale!!!
So im planning to move next year and ill be selling my Sierra soon, so its time to clear out all the goodies ive been hanging onto.
1. Sierra Front Tube (thick) Bar, Mounts onto factory bolt holes in chassis, has led indicators (not very big ones), DOES NOT INCLUDE SPOT LIGHTS!!!
$200 Sold
2. Solid custom rear bar, bolts up to factory bolt holes, comes with LEDs hooked upto Sierra Plugs.
$150 (leds are worth about $80 by them selves)Sold
3. Custom (homemade) Roll Bar for Soft top Sierra.
$50Sold
4. Set of white WT Sierra Flares, without front brackets (can include rear mounting brackets if needed)
$80 (can split them up, eg $40 for Front, $40 for rears)Sold
5. Complete Sierra WT front Diff including Brake calipers, etc. Has rebuild swivel hubs.
$100Sold
6. Complete G16B conversion for Sierra. Includes Engine, adapter plate, mounts, Cut down harness, computer, fuel pumps, surge tank, dash mounted gauges EVERYTHING YOU NEED. But there is a catch, the engine is running very rich to the point is undriveable. Have tried O2 sensor, AFM, Computer, Compression test, etc. Think it might be the coil because spark looks weak. (PM me for more info if needed)
$1200 Sold
Also have body panels, doors, checker plate door trims, etc
PM me if you need anything.
Open to offers.
Can deliver parts to Melbourne when i head down that way on 3/12/11.
Could also arrange delivery to ACT
You do not have the required permissions to view the files attached to this post.
Last edited by zuk_244 on Fri Feb 24, 2012 10:13 am, edited 5 times in total.
|
|
|
|
|
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
Posted: Tue Nov 22, 2011 12:37 am |
|
stop being in victoria already...
This stuff will go quick 
|
|
|
|
|
dougies_tx5turbo
Joined: Tue May 25, 2010 10:56 am Posts: 1051 Location: north brisbane
|
Posted: Tue Nov 22, 2011 1:23 am |
|
|
if only you were in queensland i would take the roll bar, engine and rear bar off you. how much do you reckon shipping would be to Pinkenba, Brisbane?
|
|
|
|
|
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
Posted: Tue Nov 22, 2011 3:31 am |
|
|
hey mate where are you going when you come to melbourne?
Im very interested in the roll bar and rear bar..... Can the rear bar be used with a tow bar?
Cheers mate
_________________
back in a built sierra!
|
|
|
|
|
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
Posted: Tue Nov 22, 2011 4:27 am |
|
suzukikid wrote: hey mate where are you going when you come to melbourne?
Im very interested in the roll bar and rear bar..... Can the rear bar be used with a tow bar?
Cheers mate
Yeah mate the rear bar had a towbar with it. The bar pretty well copies the factory bar shape.
Going down the east side of Melboure to Cranbourne to see family but can meet else where.
|
|
|
|
|
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
Posted: Tue Nov 22, 2011 4:33 am |
|
dougies_tx5turbo wrote: if only you were in queensland i would take the roll bar, engine and rear bar off you. how much do you reckon shipping would be to Pinkenba, Brisbane?
Id imagine it would blow the price out quite abit. If i cant sell them locally ill look into it for you.
|
|
|
|
|
RUN.10W
Joined: Mon Sep 20, 2010 7:17 am Posts: 211 Location: sydney
|
Posted: Tue Nov 22, 2011 4:41 am |
|
|
Pm'd
_________________
96 coily, lifted, locked,geared, 33's.
DRV31T
|
|
|
|
|
86slowsierra
az supporter
Joined: Fri Jul 25, 2008 11:30 pm Posts: 724 Location: Melbourne
Vehicle: nt sierra
|
Posted: Tue Nov 22, 2011 6:50 am |
|
|
what are the flares like? dints?
|
|
|
|
|
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
Posted: Tue Nov 22, 2011 7:11 am |
|
|
well im havin roll bar and rear bar! if anyone wants me to grab anything they buy im in melton if that makes it anyeasyer!
_________________
back in a built sierra!
|
|
|
|
|
salih
az supporter
Joined: Tue Oct 06, 2009 10:30 pm Posts: 1475 Location: melbourne
|
Posted: Tue Nov 22, 2011 7:14 am |
|
dam i asked about the roll bar you got in before me lol 
|
|
|
|
|
RUN.10W
Joined: Mon Sep 20, 2010 7:17 am Posts: 211 Location: sydney
|
Posted: Tue Nov 22, 2011 7:18 am |
|
|
Suzukikid will give you $250 for the rear bar lol
_________________
96 coily, lifted, locked,geared, 33's.
DRV31T
|
|
|
|
|
86slowsierra
az supporter
Joined: Fri Jul 25, 2008 11:30 pm Posts: 724 Location: Melbourne
Vehicle: nt sierra
|
Posted: Tue Nov 22, 2011 7:19 am |
|
suzukikid wrote: well im havin roll bar and rear bar! if anyone wants me to grab anything they buy im in melton if that makes it anyeasyer!
i was actually thinking this.
if the fairs are in ok. and he's fine with it.
maybe i'll direct deposit or drop the money off and he can leave them with you., n i'll swing past later.
|
|
|
|
|
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
Posted: Tue Nov 22, 2011 7:38 am |
|
|
alih you dont need it....lol its the start of a 6 point cage i was gunna make anyway.....
RUN.10W i need a rear bar......My light lenses are stuffed and my rear bar is hammered.....
86slowsierra yeah too easy mate if you pay for em i can grab em and put em in the shed for ya!
_________________
back in a built sierra!
|
|
|
|
|
RUN.10W
Joined: Mon Sep 20, 2010 7:17 am Posts: 211 Location: sydney
|
Posted: Tue Nov 22, 2011 7:43 am |
|
I don't have a rear bar at all lol but you were lucky to get in first
_________________
96 coily, lifted, locked,geared, 33's.
DRV31T
|
|
|
|
|
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
Posted: Tue Nov 22, 2011 7:48 am |
|
|
Ya can have my rear bar if ya want.....would cost a bit to get it to ya wouldnt it?
_________________
back in a built sierra!
|
|
|
|
|
RUN.10W
Joined: Mon Sep 20, 2010 7:17 am Posts: 211 Location: sydney
|
Posted: Tue Nov 22, 2011 7:59 am |
|
|
I was trying to meet him in Canberra as I am wanting the engine and front bar to though just waiting to try and organize something with the guy selling the items just makes it hard due to every one being busy etc, dude you got in first rightfully the rear bar is yours.
_________________
96 coily, lifted, locked,geared, 33's.
DRV31T
|
|
|
|
|
salih
az supporter
Joined: Tue Oct 06, 2009 10:30 pm Posts: 1475 Location: melbourne
|
Posted: Tue Nov 22, 2011 8:00 am |
|
|
ok well get started on another 6 point cage for me lmao ;P
|
|
|
|
|
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
Posted: Tue Nov 22, 2011 9:07 am |
|
|
i thought ya were sellin yours salih......haha see how mine turns out.....ya might be able to make you one too....
_________________
back in a built sierra!
|
|
|
|
|
Fmoss3
Joined: Sat Oct 03, 2009 11:30 pm Posts: 535 Location: brisbane, northside
|
Posted: Tue Nov 22, 2011 9:23 am |
|
|
lol told ya they would go quick
|
|
|
|
|
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
Posted: Tue Nov 22, 2011 9:35 am |
|
Should have asked more lol
|
|
|
|
|
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
Posted: Wed Nov 23, 2011 7:18 am |
|
have payed diposit on Rear bar and roll bar  !
_________________
back in a built sierra!
|
|
|
|
|
RUN.10W
Joined: Mon Sep 20, 2010 7:17 am Posts: 211 Location: sydney
|
Posted: Wed Nov 23, 2011 7:28 am |
|
Have paid deposit on front bar and engine as of last night
_________________
96 coily, lifted, locked,geared, 33's.
DRV31T
|
|
|
|
|
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
Posted: Tue Nov 29, 2011 10:41 pm |
|
|
Front bar and Engine are back for Sale!!!
Also have Checkerplate door trims $100
G16b denso ECU $100
|
|
|
|
|
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
Posted: Wed Nov 30, 2011 5:24 am |
|
|
see ya sunday bud!
_________________
back in a built sierra!
|
|
|
|
|
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
Posted: Wed Nov 30, 2011 6:56 am |
|
|
Will do. Im hopeing i can flog off the front bar and motor at the same time.
|
|
|
|
|
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
Posted: Tue Jan 03, 2012 6:29 am |
|
|
More info on the motor:
Up for sale is my Complete G16B (from a 1994 Suzuki Vitara) Engine conversion for a Suzuki Sierra
ENGINE IS NOT RUNNING WELL (HAS ISSUES)
Had this engine in my Sierra for abit over 6 months, it was in another Sierra for about 2 years before i pulled it out and put it into mine.
When i put it into my car i replaced the Timing Belt and Bearing, Water Pump, Thermostat, Spark Plugs, New extractors and O2 sensor.
Engine ran great until about 2 months ago when it started overfueling (running very rich) to the point that its undriveable.
Since then ive replaced the Air Flow Meter, tested all sensors, tried a computer from another Vitara, Compression tested engine, all with no success.
It could be something little or big, there are no Suzuki Dealers or EFI Specialists near by to read the computer for me. So ive decided to swap the old motor back in as im planning to sell my Sierra anyway.
This engine will fit under a Sierra Bonnet without needing a body lift (Just).
Sump is dented from being in a non lifted Sierra. If your Sierra is not lifted it would be best to modify the sump (plenty of sites on the internet show how to do this)
Comes with:
Fuel Injected G16B engine
Computer and Wiring loom (loom is all pre cut and only needs 3 wires spliced into sierra loom)
All sensors, starter motor, alternator, etc
Vitara Radiator with custom mounts and Thermo fan with fan controller
Choice of 2 surge tanks (under car or under bonnet depending which you prefer)
Fuel pumps (High and low pressure)
Intake air plumbing and exhaust extractors
Custom Engine mount adapters
Gearbox adapter plate
Speco Oil Pressure and Water Temp Gauges in custom dash holder
Dash cluster with VSS and check engine light added in
Doesnt come with:
Flywheel (Will need a Sierra Flywheel to mate up with a Sierra Gearbox)
Clutch, gearbox, etc
|
|
|
|
|
|
