auszookers.com
http://auszookers.com/forum/

FS: My Good Stuff
http://auszookers.com/forum/viewtopic.php?f=7&t=27920		 Page 1 of 1
Author:  zuk_244 [ Tue Nov 22, 2011 12:30 am ]
Post subject:  FS: My Good Stuff
Front bar and Engine are back for Sale!!!
So im planning to move next year and ill be selling my Sierra soon, so its time to clear out all the goodies ive been hanging onto.

1. Sierra Front Tube (thick) Bar, Mounts onto factory bolt holes in chassis, has led indicators (not very big ones), DOES NOT INCLUDE SPOT LIGHTS!!!
$200 Sold

2. Solid custom rear bar, bolts up to factory bolt holes, comes with LEDs hooked upto Sierra Plugs.
$150 (leds are worth about $80 by them selves)Sold

3. Custom (homemade) Roll Bar for Soft top Sierra.
$50Sold

4. Set of white WT Sierra Flares, without front brackets (can include rear mounting brackets if needed)
$80 (can split them up, eg $40 for Front, $40 for rears)Sold

5. Complete Sierra WT front Diff including Brake calipers, etc. Has rebuild swivel hubs.
$100Sold

6. Complete G16B conversion for Sierra. Includes Engine, adapter plate, mounts, Cut down harness, computer, fuel pumps, surge tank, dash mounted gauges EVERYTHING YOU NEED. But there is a catch, the engine is running very rich to the point is undriveable. Have tried O2 sensor, AFM, Computer, Compression test, etc. Think it might be the coil because spark looks weak. (PM me for more info if needed)
$1200 Sold


Also have body panels, doors, checker plate door trims, etc
PM me if you need anything.

Open to offers.

Can deliver parts to Melbourne when i head down that way on 3/12/11.
Could also arrange delivery to ACT
Author:  Fmoss3 [ Tue Nov 22, 2011 12:37 am ]
Post subject:  Re: FS: My Good Stuff
stop being in victoria already...

This stuff will go quick :)
Author:  dougies_tx5turbo [ Tue Nov 22, 2011 1:23 am ]
Post subject:  Re: FS: My Good Stuff
if only you were in queensland i would take the roll bar, engine and rear bar off you. how much do you reckon shipping would be to Pinkenba, Brisbane?
Author:  suzukikid [ Tue Nov 22, 2011 3:31 am ]
Post subject:  Re: FS: My Good Stuff
hey mate where are you going when you come to melbourne?

Im very interested in the roll bar and rear bar..... Can the rear bar be used with a tow bar?

Cheers mate
Author:  zuk_244 [ Tue Nov 22, 2011 4:27 am ]
Post subject:  Re: FS: My Good Stuff
suzukikid wrote:
hey mate where are you going when you come to melbourne?

Im very interested in the roll bar and rear bar..... Can the rear bar be used with a tow bar?

Cheers mate

Yeah mate the rear bar had a towbar with it. The bar pretty well copies the factory bar shape.

Going down the east side of Melboure to Cranbourne to see family but can meet else where.
Author:  zuk_244 [ Tue Nov 22, 2011 4:33 am ]
Post subject:  Re: FS: My Good Stuff
dougies_tx5turbo wrote:
if only you were in queensland i would take the roll bar, engine and rear bar off you. how much do you reckon shipping would be to Pinkenba, Brisbane?


Id imagine it would blow the price out quite abit. If i cant sell them locally ill look into it for you.
Author:  RUN.10W [ Tue Nov 22, 2011 4:41 am ]
Post subject:  Re: FS: My Good Stuff
Pm'd
Author:  86slowsierra [ Tue Nov 22, 2011 6:50 am ]
Post subject:  Re: FS: My Good Stuff
what are the flares like? dints?
Author:  suzukikid [ Tue Nov 22, 2011 7:11 am ]
Post subject:  Re: FS: My Good Stuff
well im havin roll bar and rear bar! if anyone wants me to grab anything they buy im in melton if that makes it anyeasyer!
Author:  salih [ Tue Nov 22, 2011 7:14 am ]
Post subject:  Re: FS: My Good Stuff
dam i asked about the roll bar you got in before me lol :(
Author:  RUN.10W [ Tue Nov 22, 2011 7:18 am ]
Post subject:  Re: FS: My Good Stuff
Suzukikid will give you $250 for the rear bar lol
Author:  86slowsierra [ Tue Nov 22, 2011 7:19 am ]
Post subject:  Re: FS: My Good Stuff
suzukikid wrote:
well im havin roll bar and rear bar! if anyone wants me to grab anything they buy im in melton if that makes it anyeasyer!


i was actually thinking this.
if the fairs are in ok. and he's fine with it.
maybe i'll direct deposit or drop the money off and he can leave them with you., n i'll swing past later.
Author:  suzukikid [ Tue Nov 22, 2011 7:38 am ]
Post subject:  Re: FS: My Good Stuff
alih you dont need it....lol its the start of a 6 point cage i was gunna make anyway.....

RUN.10W i need a rear bar......My light lenses are stuffed and my rear bar is hammered.....

86slowsierra yeah too easy mate if you pay for em i can grab em and put em in the shed for ya!
Author:  RUN.10W [ Tue Nov 22, 2011 7:43 am ]
Post subject:  Re: FS: My Good Stuff
I don't have a rear bar at all lol but you were lucky to get in first :)
Author:  suzukikid [ Tue Nov 22, 2011 7:48 am ]
Post subject:  Re: FS: My Good Stuff
Ya can have my rear bar if ya want.....would cost a bit to get it to ya wouldnt it?
Author:  RUN.10W [ Tue Nov 22, 2011 7:59 am ]
Post subject:  Re: FS: My Good Stuff
I was trying to meet him in Canberra as I am wanting the engine and front bar to though just waiting to try and organize something with the guy selling the items just makes it hard due to every one being busy etc, dude you got in first rightfully the rear bar is yours.
Author:  salih [ Tue Nov 22, 2011 8:00 am ]
Post subject:  Re: FS: My Good Stuff
ok well get started on another 6 point cage for me lmao ;P
Author:  suzukikid [ Tue Nov 22, 2011 9:07 am ]
Post subject:  Re: FS: My Good Stuff
i thought ya were sellin yours salih......haha see how mine turns out.....ya might be able to make you one too....
Author:  Fmoss3 [ Tue Nov 22, 2011 9:23 am ]
Post subject:  Re: FS: My Good Stuff
lol told ya they would go quick
Author:  zuk_244 [ Tue Nov 22, 2011 9:35 am ]
Post subject:  Re: FS: My Good Stuff
Should have asked more :( lol
Author:  suzukikid [ Wed Nov 23, 2011 7:18 am ]
Post subject:  Re: FS: My Good Stuff
have payed diposit on Rear bar and roll bar :P !
Author:  RUN.10W [ Wed Nov 23, 2011 7:28 am ]
Post subject:  Re: FS: My Good Stuff
Have paid deposit on front bar and engine as of last night :)
Author:  zuk_244 [ Tue Nov 29, 2011 10:41 pm ]
Post subject:  Re: FS: My Good Stuff
Front bar and Engine are back for Sale!!!
Also have Checkerplate door trims $100
G16b denso ECU $100
Author:  suzukikid [ Wed Nov 30, 2011 5:24 am ]
Post subject:  Re: FS: My Good Stuff
see ya sunday bud!
Author:  zuk_244 [ Wed Nov 30, 2011 6:56 am ]
Post subject:  Re: FS: My Good Stuff
Will do. Im hopeing i can flog off the front bar and motor at the same time.
Author:  zuk_244 [ Tue Jan 03, 2012 6:29 am ]
Post subject:  Re: FS: My Good Stuff
More info on the motor:

Up for sale is my Complete G16B (from a 1994 Suzuki Vitara) Engine conversion for a Suzuki Sierra

ENGINE IS NOT RUNNING WELL (HAS ISSUES)

Had this engine in my Sierra for abit over 6 months, it was in another Sierra for about 2 years before i pulled it out and put it into mine.

When i put it into my car i replaced the Timing Belt and Bearing, Water Pump, Thermostat, Spark Plugs, New extractors and O2 sensor.

Engine ran great until about 2 months ago when it started overfueling (running very rich) to the point that its undriveable.
Since then ive replaced the Air Flow Meter, tested all sensors, tried a computer from another Vitara, Compression tested engine, all with no success.
It could be something little or big, there are no Suzuki Dealers or EFI Specialists near by to read the computer for me. So ive decided to swap the old motor back in as im planning to sell my Sierra anyway.

This engine will fit under a Sierra Bonnet without needing a body lift (Just).
Sump is dented from being in a non lifted Sierra. If your Sierra is not lifted it would be best to modify the sump (plenty of sites on the internet show how to do this)

Comes with:
Fuel Injected G16B engine
Computer and Wiring loom (loom is all pre cut and only needs 3 wires spliced into sierra loom)
All sensors, starter motor, alternator, etc
Vitara Radiator with custom mounts and Thermo fan with fan controller
Choice of 2 surge tanks (under car or under bonnet depending which you prefer)
Fuel pumps (High and low pressure)
Intake air plumbing and exhaust extractors
Custom Engine mount adapters
Gearbox adapter plate
Speco Oil Pressure and Water Temp Gauges in custom dash holder
Dash cluster with VSS and check engine light added in
Doesnt come with:
Flywheel (Will need a Sierra Flywheel to mate up with a Sierra Gearbox)
Clutch, gearbox, etc
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/