auszookers.com
http://auszookers.com/forum/

[VIC] Tough WT diff, RUF chassis and HT body
http://auszookers.com/forum/viewtopic.php?f=7&t=28114		 Page 1 of 1
Author:  PJ.zook [ Mon Nov 28, 2011 5:22 am ]
Post subject:  [VIC] Tough WT diff, RUF chassis and HT body
Selling the final major parts of the zook all as one. You get:
-Rear WT diff with HD Calmini shafts, Lockright locker, custom disc brake setup.
-WT chassis with four rear 2" lifted springs and RUF conversion, also has been modified to take a LWB vit petrol tank (not included but can sell separately)
-HT body with virtual lift in front and 2" bodylift everywhere, both doors and rear boot door.

All for $800, just want it gone from driveway, call me 0438858325
Author:  remydog05 [ Mon Nov 28, 2011 9:00 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
mmmmm???

tempting!
Author:  dank [ Mon Nov 28, 2011 10:50 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
whats the ratio in the diff?

:helloo: remydog :P bin scab haha
Author:  PJ.zook [ Mon Nov 28, 2011 7:02 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Dont remember the ratio, its whatever it came with stock.
Author:  Built4thrashing [ Mon Nov 28, 2011 10:31 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Impretty sure its has 3.7 WT ratios.
Author:  PJ.zook [ Tue Dec 06, 2011 5:40 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
BUMP
Author:  PJ.zook [ Thu Dec 08, 2011 4:34 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Ugh you lot are gonna make me have to separate arent ya
Author:  Built4thrashing [ Thu Dec 08, 2011 4:56 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
PJ.zook wrote:
Ugh you lot are gonna make me have to separate arent ya


Thats the AusZookers way mate.

As most are tight with their money they will only do small buys at a time but will end up paying more in the long run. :crazy: Its a suzuki thing. :helloo:
Author:  Joshyboy26 [ Thu Dec 08, 2011 6:45 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
How much for the diff if your willing to split and whats its condition? Also will the brakes hook up to stock lines or do they need to be modified?
Author:  Daves4wd [ Thu Dec 08, 2011 11:14 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
If you separate how much for the body lift??
Author:  Fast50 [ Thu Dec 08, 2011 12:15 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Send me a pic 0418440421.. Maybe keen on a build
Author:  sierrajim [ Fri Dec 09, 2011 3:18 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
I would like to buy the wheel nut off the left hand side of the diff. Only the one furthest from the ground.

I'd also like a quote on postage both with and without insurance.

Can I also have a picture to make sure it matches the colour like the other ones on my car?

Thanks

K

Bye :thefinger:
Author:  ajsr [ Fri Dec 09, 2011 6:34 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
sierrajim wrote:
I would like to buy the wheel nut off the left hand side of the diff. Only the one furthest from the ground.

I'd also like a quote on postage both with and without insurance.

Can I also have a picture to make sure it matches the colour like the other ones on my car?

Thanks

K

Bye :thefinger:


I an also interested in the same wheel nut james is but I will pickup.
my question is what is the warranty on the above mentioned wheel nut?
is it a prorata warranty or relacement?
if its a replacement warrranty I assume it would be with a nut from the same side and position as the one I want.

please confirm your terms in writing and send me your paypal details.
Author:  Built4thrashing [ Fri Dec 09, 2011 8:10 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
ajsr wrote:
sierrajim wrote:
I would like to buy the wheel nut off the left hand side of the diff. Only the one furthest from the ground.

I'd also like a quote on postage both with and without insurance.

Can I also have a picture to make sure it matches the colour like the other ones on my car?

Thanks

K

Bye :thefinger:


I an also interested in the same wheel nut james is but I will pickup.
my question is what is the warranty on the above mentioned wheel nut?
is it a prorata warranty or relacement?
if its a replacement warrranty I assume it would be with a nut from the same side and position as the one I want.

please confirm your terms in writing and send me your paypal details.



I think PJ likes Western Union Transfers in advance..

He also likes wasting all his time and money on airlockers that dont fit diffs that may fit in the diff housings in the Pathfinder, but probly wont. :helloo: :blink: :blink: :D :D :D
Author:  suzukikid [ Fri Dec 09, 2011 8:47 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Ill have the lower nut...ill pay deposit tonight and pick it up tomorow....
Author:  PJ.zook [ Fri Dec 09, 2011 9:30 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Wow never had a bidding war over my nuts. Back when I was in scouts I was kicked in the nuts once by Julia after she took offence to something... no details.

Oh and the nuts, like all other parts, have a tail light warranty; as soon as I can't see your taillights, its out of warranty.
Author:  suzukikid [ Fri Dec 09, 2011 10:35 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
ah.....is the thread all good? ill buy sight unseen..... :wink:
Author:  whincup [ Fri Dec 09, 2011 11:07 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
PJ.zook wrote:
Wow never had a bidding war over my nuts. Back when I was in scouts I was kicked in the nuts once by Julia after she took offence to something... no details.

Oh and the nuts, like all other parts, have a tail light warranty; as soon as I can't see your taillights, its out of warranty.


When you tell the story, leave out the part that it was a bunch of blokes :helloo:
Author:  denty802 [ Wed Mar 14, 2012 5:23 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
did this diff ever end up selling?

Thanks

Jesse
Author:  Joshyboy26 [ Wed Mar 14, 2012 7:03 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Yh i got it! sorry bud
Author:  Brad.Jones [ Thu Mar 15, 2012 9:34 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
What about the Hard Top Body???
Author:  suzukikid [ Thu Mar 15, 2012 6:04 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Hey bloke suppose ya still got the 2" springs? Mine bent on the weekend!
Author:  Joshyboy26 [ Thu Mar 15, 2012 7:17 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
he still has the body and springs AFAIK but i dont have his number anymore. try pm him but i dont think he goes on here much anymore.
Author:  suzukikid [ Fri Mar 16, 2012 6:23 am ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
i smsed him last night!

brad if ya want his number pm me.....other wise i can pass your details onto him!

he lives about 439873097094903k's from me so he is 3907097903598905238908-984-982 k's from you! haha
Author:  PJ.zook [ Fri Mar 16, 2012 3:16 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Ey you lot. I still have four lifted rear springs, a WT chassis with HT body and doors, and all the small stuff like steering box, etc...
Author:  Brad.Jones [ Fri Mar 16, 2012 3:19 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
How much rust in the HT Body???
Author:  Brad.Jones [ Fri Mar 16, 2012 3:19 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
At some point I'll be heading down to Melb for the F1s so perhaps I could come take a look.
Author:  PJ.zook [ Fri Mar 16, 2012 4:15 pm ]
Post subject:  Re: [VIC] Tough WT diff, RUF chassis and HT body
Body has very little rust but lots of character dents.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/