http://i1121.photobucket.com/albums/l512/nick_zooker/5d6f5398.mp4
| auszookers.com http://auszookers.com/forum/ |
|
| 1986 HOLDEN DROVER AGAIN $4500 ONO NOW WITH REGO http://auszookers.com/forum/viewtopic.php?f=7&t=28245 |
Page 1 of 1 |
| Author: | jim_dover [ Fri Dec 02, 2011 3:42 am ] |
| Post subject: | 1986 HOLDEN DROVER AGAIN $4500 ONO NOW WITH REGO |
Buyer fell throught!!!!!!! 1986 Suzuki Sierra Up for sale is my 1986 Suzuki Sierra "Holden Drover." I have spent the last 3 years building this up and have not even had the chance to really use it yet. 1 4wding trip. I have replaced almost the complete car. Items replace are as follows: Rebuilt 1.6ltr multi point efi motor. 1.3 transfer (currently running a 1ltr) Tough Dog Return to centre steering dampener Tail shafts all new uni joints and re-balanced Brand New Radiator Brand New 2' king springs Commo shocks (this car flexs like crazy) Brand new 2" extended shackles CNC plate the ones with the suzi symbol in them Brand new Davies Craig Thermo Probe 2x 8" Thermo fans Brand new battery Brand new hubs seals Brand new SPARTAN LOCKER (installed in front diff) Brand new Front Rotors Reco'd Front Calipors Brand New rear wheel cylinders Brand new rear drum shoes Brand new hand brake shoes Brand new tail light Brand new front indicators Brand new MU Canvas Fast back soft top Rear draw set up Brand new 0.5ltr swirl pot and bosch 044 pump Brand new carpet Aftermarket steering wheel and boss kit Brand new oil pressure, water temp, volts and tacho (all electric sends 100% legal) Brand new headdeck, 6" pioneers and 6x9 kickers in boxes in the rear Running a 40LTR fuel cell. I have spent countless hours and thousands of dollars on this car and new really got a chance to use it. I have modified the dash cluster so it sends a VSS to the ecu as the motor requires it to runs properly. Complete ECU harness strip of all none vital parts. Eg. air bags air con harness and so on everything that a Vitara has that the Sierra does not. Also comes with two half doors need painting cut down and plated with 6mm gal. Now has rego might be able to supply roadworthy if really needed. The entire car has been mod plated how it sits now. Was originally a 2 seater and has had the seats changed to later model seats. This car is really really fast considering its running 31" tryes. I have 8x 31' baja claws. 7 of them are around 40-50% still plenty for a little suzi. 1 is brandnew. Only 5 of them are fitted to tyres at the moment. Fitted to F100 rims around -23 offset. Also running TJ Wrangler flares to keep the tyres covered. Standard steel bullbar with holes cut either side to get to the recovery hooks. There is probably so much I've missed this car is really a one of must be see and driven to believe. Don't have pictures yet msg me for them if your keen. Call Nick on 0424 414 564 |
|
| Author: | webber [ Fri Dec 02, 2011 10:11 am ] |
| Post subject: | Re: 1986 HOLDEN DROVER AGAIN $4500 ONO NOW WITH REGO |
Could be interested but will defo need some photos. Thanks |
|
| Author: | jim_dover [ Sun Dec 04, 2011 6:16 am ] |
| Post subject: | Re: 1986 HOLDEN DROVER AGAIN $4500 ONO NOW WITH REGO |
Thanks for the pics stockman. The paint has been cleaned up here and there since the photos where taken and now has a false floor in the back which has a drawer on one side and the fuel cell in the other side. Also has a half cage in the back which the spare tire sits on. This car needs to go. I don't have the spare time to to use this any more or the space to keep. ALL REASONABLE OFFERS CONSIDERED!!!! |
|
| Author: | stockman [ Sun Dec 04, 2011 6:35 am ] |
| Post subject: | Re: 1986 HOLDEN DROVER AGAIN $4500 ONO NOW WITH REGO |
|
http://i1121.photobucket.com/albums/l512/nick_zooker/5d6f5398.mp4 |
|
| Author: | jim_dover [ Tue Dec 06, 2011 8:18 pm ] |
| Post subject: | Re: 1986 HOLDEN DROVER AGAIN $4500 ONO NOW WITH REGO |
BUMP Make me an offer I would like this gone ASAP. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|