auszookers.com
http://auszookers.com/forum/

Qld- bundy rear diff
http://auszookers.com/forum/viewtopic.php?f=7&t=28309
Page 1 of 1

Author:  11_evl [ Sun Dec 04, 2011 10:37 pm ]
Post subject:  Qld- bundy rear diff

Hi
As tital states I have a Bundera rear diff forsale
Has all std coil mounts and control arm mounts
has both axles, one is modded for disc brake conversion (not in pic)
and unknown ratio centre (possibly supply other ratios)
$400

also have bare housing pretty much same as pic just no centre or axles $100
Pm

Image

Author:  RUN.10W [ Mon Dec 05, 2011 2:15 am ]
Post subject:  Re: Qld- bundy rear diff

Grrr queensland as usual.

Author:  11_evl [ Mon Dec 05, 2011 3:52 am ]
Post subject:  Re: Qld- bundy rear diff

can be freighted or dropped at milbrodale next weekend

Author:  11_evl [ Sun Jan 01, 2012 9:20 am ]
Post subject:  Re: Qld- bundy rear diff

Still for sale
Also have one complete

Author:  2stroker [ Sun Jan 01, 2012 11:48 am ]
Post subject:  Re: Qld- bundy rear diff

Do you have a front one as well ??

Author:  11_evl [ Sun Jan 01, 2012 6:54 pm ]
Post subject:  Re: Qld- bundy rear diff

I have a average looking front housing. It could be cleaned up. Free with rear. May have one of the axles, can't remember if I kept it.

Author:  2stroker [ Sun Jan 01, 2012 10:42 pm ]
Post subject:  Re: Qld- bundy rear diff

How much for the rear complete one and does th front one still have origiinal arms and mounts etc on it

Author:  11_evl [ Mon Jan 02, 2012 12:23 am ]
Post subject:  Re: Qld- bundy rear diff

2stroker wrote:
How much for the rear complete one and does th front one still have origiinal arms and mounts etc on it

rear one complete i want $400 including the free front diff (must buy rear :D ) and the front has all the brackets still attached

Author:  sierra35 [ Tue Jan 03, 2012 2:39 am ]
Post subject:  Re: Qld- bundy rear diff

What ratio is in the rear?

Author:  11_evl [ Sun Jan 08, 2012 3:15 am ]
Post subject:  Re: Qld- bundy rear diff

sierra35 wrote:
What ratio is in the rear?

first post edit

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/