| auszookers.com http://auszookers.com/forum/ |
|
| 4 x 15" Rims, 2 with 31x10.5s 2 with 235/75/15s http://auszookers.com/forum/viewtopic.php?f=7&t=29240 |
Page 1 of 1 |
| Author: | paulv [ Wed Jan 04, 2012 1:07 am ] |
| Post subject: | 4 x 15" Rims, 2 with 31x10.5s 2 with 235/75/15s |
4 15" Rims, 2 with 31x10.5 Kumho PowerGuards 2 with 235/75/15 Kumho PowerGuards. Looked good on my zook. Nice offset rims. $250 the lot..... I am in Adelaide, SA |
|
| Author: | paulv [ Fri Jan 06, 2012 12:39 am ] |
| Post subject: | Re: 4 x 15" Rims, 2 with 31x10.5s 2 with 235/75/15s |
Still for sale... |
|
| Author: | atari4x4 [ Fri Jan 06, 2012 1:08 am ] |
| Post subject: | Re: 4 x 15" Rims, 2 with 31x10.5s 2 with 235/75/15s |
any chance of an offset measurement? i'm chasing a few -12 to -15 15x7's to go on my trailer |
|
| Author: | paulv [ Fri Jan 06, 2012 1:14 am ] |
| Post subject: | Re: 4 x 15" Rims, 2 with 31x10.5s 2 with 235/75/15s |
Can prolly get a rough idea of the distance from the back of the mounting surface to the outside edge etc with a tape measure... other wise you are welcome to come and take a look... am in Craigmore.. |
|
| Author: | atari4x4 [ Fri Jan 06, 2012 1:19 am ] |
| Post subject: | Re: 4 x 15" Rims, 2 with 31x10.5s 2 with 235/75/15s |
yeah that would give me an idea of how much offset they've got |
|
| Author: | paulv [ Fri Jan 06, 2012 12:12 pm ] |
| Post subject: | Re: 4 x 15" Rims, 2 with 31x10.5s 2 with 235/75/15s |
More pics indicating offset. It is a nice deep ofset, looked fantastic on my zook - pity I didn't take any pics. Measured from the back of the mounting flange to the front of the rim - actually the level is resting on the rubber, not the rim edge.
Measured from the front (nut side) of the mounting flange to the back of the rim - again the level is resting on the rubber not the rim edge.
|
|
| Author: | paulv [ Tue Jan 10, 2012 9:01 am ] |
| Post subject: | Re: 4 x 15" Rims, 2 with 31x10.5s 2 with 235/75/15s |
Still for sale! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|