Gadzuks wrote:
Can you please post some pics of the rims?
How they looked when I first fitted them after hours sanding and polishing.
How they look now.
| auszookers.com http://auszookers.com/forum/ |
|
| SCSW Shed cleanout sale http://auszookers.com/forum/viewtopic.php?f=7&t=30251 |
Page 1 of 1 |
| Author: | want33s [ Tue Feb 07, 2012 9:29 am ] |
| Post subject: | SCSW Shed cleanout sale |
Got too much crap here so some of it has to go... WT rear diff housing (bare). Has had the perches moved to NT spacing and had 20mm shaved from the bottom for better ground clearance. Also has brake line locating tabs on each side in readiness for a disc brake conversion. Painted gloss black, ready to assemble. SOLD Maruti cab with extras. 1 Maruti cab section. 1 roof section. 1 Maruti targa bar. 1 Maruti LWB steel filler panel. 1 Suzuki SWB steel filler panel. 8 Sierra tintop rear windows. Most with demister. My plan was to take a mold and reproduce these using tintop rear windows as they are a tiny bit larger and much easier to get. BUSINESS OPPORTUNITY for the right person. $900 PICKUP ONLY SIERRA & VITARA Radiators Brand new in the box, alloy cored, plastic tanked radiators to suit 1.3-1.6 Sierra and 1.6 Vitara. $160 delivered anywhere in Aust. Sold out of Sierra rads. Will advise when more are in stock. Vitara 5.12 front centre Complete 5.12 front centre VGC. SOLD Simex Centipede ET2 32x9.5 Set of four 32x9.5 Simex Extreme Centipedes. Very good tread (13mm). Few nicks and cuts but nothing serious. $800 38mm Wheel spacers Set of four inch and a half (38mm) aluminium wheelspacers to suit Sierra or Vitara. $200 Bathurst Globe mag wheels 15x7 Set of four Globe 5 spoke alloy wheels in 15x7 with 0 offset. They have 2nd valve stem holes fitted for internal beadlocks but this isn't a drama if you don't have beadlocks. $200 WT LWB rear tailshaft Custom made super heavy wall 1.3 WT lwb rear tailshaft. SOLD ARB OME +40 rear springs Brand new ARB OME rear springs (pair). Cost $250, sell $200. WT long side (pass) rear axle WT LH rear axle with backing plate and drum. No twist in splines. $75 G13 engine (reco'd) G13 engine, standard bore with new rings and bearings as well as a fully reco'd head fitted. Has new oil pump too. Hasn't been started since. SOLD Vitara grille (white) VGC Vitara 89-94? grille. No cracks or broken bits. $50 1.3 diff centres 2 X NT front... $100 each 1 X NT rear... $150 1 X WT rear... SOLD Federal Couragia 30x9.5 muddy One only, 30x9.5 Federal Couragia mud tyre. Has 8mm or so tread. $50 |
|
| Author: | want33s [ Thu Feb 09, 2012 8:30 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
bump. |
|
| Author: | want33s [ Sun Feb 12, 2012 8:32 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
First post edited. |
|
| Author: | sogone [ Sun Feb 12, 2012 8:49 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Got any transfers? |
|
| Author: | sogone [ Sun Feb 12, 2012 8:49 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
WT Sierra. |
|
| Author: | want33s [ Sun Feb 12, 2012 8:53 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
sogone wrote: Got any (WT Sierra) transfers? Sorry, no. |
|
| Author: | boost=money [ Sun Feb 12, 2012 9:18 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
will come grab spacers next saturday if still there |
|
| Author: | want33s [ Sun Feb 12, 2012 9:24 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
boost=money wrote: will come grab spacers next saturday if still there Cool.. I can post them for $20. |
|
| Author: | boost=money [ Sun Feb 12, 2012 4:57 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
i will come up and grab them next weekend if u can hold them for me. heading up to barra park so on the way thanks mate |
|
| Author: | 055ETH [ Sun Feb 12, 2012 9:57 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Any difference in wt and nt diff centers?? Can u put nt centers in a wt? |
|
| Author: | want33s [ Mon Feb 13, 2012 8:31 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
055ETH wrote: Any difference in wt and nt diff centers?? Can u put nt centers in a wt? NT centres will bolt straight into WT housings and the axles fit. The differences are: NT 3.9:1 WT 3.7:1......... That means NT is about 5% lower geared. NT has a smaller drive flange pattern but the flanges on the diffs or the tailshafts can be changed easily. NT front diffs are 4 pinion which are stronger than WT fronts which are only 2 pinion. |
|
| Author: | sambo91 [ Mon Feb 13, 2012 12:57 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
I was just wondering if you had a sierra body lying around there with the left hand sill in tact ? I'm looking to chop the old one which i found a heap of bog and crap in it and weld in another one. My Sierra is an sj80 so the wt or nt one should be fine also =) Thanks alot for your time. Regards Sambo. |
|
| Author: | Zook_Fan [ Mon Feb 13, 2012 1:07 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Got any stock WT diff housings? |
|
| Author: | want33s [ Mon Feb 13, 2012 2:22 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Zook_Fan wrote: Got any stock WT diff housings? Yep. Got a standard WT front $75 plus freight. Got a shaved and NT'd WT rear $100 plus freight. |
|
| Author: | want33s [ Wed Feb 15, 2012 2:09 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Diff housing sold pending payment. |
|
| Author: | Gadzuks [ Thu Feb 16, 2012 3:21 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Can you please post some pics of the rims? |
|
| Author: | want33s [ Thu Feb 16, 2012 5:50 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Gadzuks wrote: Can you please post some pics of the rims? How they looked when I first fitted them after hours sanding and polishing. How they look now.
|
|
| Author: | want33s [ Thu Feb 23, 2012 7:10 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
1st post edited with items sold. |
|
| Author: | swifty_ano [ Fri Feb 24, 2012 5:34 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
How much for a vitara radiator and ill pick up? Do you have both sizes? |
|
| Author: | want33s [ Fri Feb 24, 2012 6:56 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
swifty_ano wrote: How much for a vitara radiator and ill pick up? Do you have both sizes? I have one Vit rad left. Pretty sure it says SQ416 on the box. $140 if you pick up. |
|
| Author: | swifty_ano [ Fri Feb 24, 2012 10:20 am ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Sold. I'll measure mine after work and give you a call |
|
| Author: | want33s [ Sat Feb 25, 2012 3:49 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Rad is no good to Swifty_Ano, his is smaller so this one is still available. |
|
| Author: | Shansh [ Sat Feb 25, 2012 4:48 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
rad arrived late last week, thanks Jas |
|
| Author: | want33s [ Wed Mar 14, 2012 12:37 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Shansh wrote: rad arrived late last week, thanks Jas No worries Shan. 
|
|
| Author: | Zook_Fan [ Wed Mar 14, 2012 12:44 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Do the alloy radiators cool any better than copper core? |
|
| Author: | want33s [ Wed Mar 14, 2012 3:35 pm ] |
| Post subject: | Re: SCSW Shed cleanout sale |
Zook_Fan wrote: Do the alloy radiators cool any better than copper core? I have never directly compared them but I can say that my 1.6 in Sierra with Sierra rad never got hot unless I was flogging it on the limiter for 5 minutes or more, usually low range in the bottom of a muddy gully, and always cooled down quickly when let idle for a few minutes. I don't have any 1.3 rads at the moment. I do have a 1.6 Vit rad here that will fit a Sierra with modified brackets. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|