| auszookers.com http://auszookers.com/forum/ |
|
| Vit Power Steer + Sierra Bolt On Kit [QLD] http://auszookers.com/forum/viewtopic.php?f=7&t=30434 |
Page 1 of 1 |
| Author: | Dee [ Mon Feb 13, 2012 6:10 pm ] |
| Post subject: | Vit Power Steer + Sierra Bolt On Kit [QLD] |
Suzuki Vitara power steer setup, with box, pump orig pump bracket, most lines. Includes new trail tough V to Multirib pulley (and orig vit pulley depending on your setup). New trail tough drop pitman arm BenT sierra fitment wedge kit Pretty much a solid 90% complete sierra bolt-on power steer. Just require a resevoir/return line, a belt, and a steering shaft. Box & pump appears to be in good condition, turn freely with no play.  $400 - pickup only. Sunshine Coast QLD. Contact via PM. |
|
| Author: | Rusho [ Mon Feb 13, 2012 7:07 pm ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
PM Sent |
|
| Author: | Dee [ Wed Feb 15, 2012 6:52 am ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
cmon people, i would have jumped at a pwr steer setup like this! Going away next week so someone come pick it up! |
|
| Author: | scorpydude [ Wed Feb 15, 2012 7:35 am ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
Do these kits fit NT or WT? Or both? What about 1L NT? |
|
| Author: | want33s [ Wed Feb 15, 2012 8:57 am ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
scorpydude wrote: Do these kits fit NT or WT? Or both? What about 1L NT? This will bolt into any 1.0 or 1.3 Sierra. |
|
| Author: | danw [ Wed Feb 15, 2012 10:41 pm ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
What bout a 1.6 jase? Need power steer to turn the 33s... |
|
| Author: | JrZook [ Thu Feb 16, 2012 10:04 am ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
danw wrote: What bout a 1.6 jase? Need power steer to turn the 33s... yes |
|
| Author: | Dee [ Thu Feb 16, 2012 7:02 pm ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
Yes I have orig bit multirib pulley to work on a 1.6 and not in photo is the pump bracket |
|
| Author: | Dee [ Sat Mar 10, 2012 2:19 am ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
Still here for sale! |
|
| Author: | bek [ Sun Mar 11, 2012 6:22 pm ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
i'd come get it if it were complete, but for $500 without everything, no thanks |
|
| Author: | Dee [ Mon Mar 12, 2012 7:17 am ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
You need to modify your own steering shaft, pick up any sort of res & hook up return line, and put a belt on. It's as complete as they come. |
|
| Author: | Dee [ Mon Mar 12, 2012 7:21 am ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
And rather than posting what you wouldn't pay, why dont you pm me what you would?? 
|
|
| Author: | Junior_91 [ Mon Mar 12, 2012 1:37 pm ] |
| Post subject: | Re: Sierra Bits - Complete Power Steer Setup / Roctoy Ring |
If your willing to separate ill take the adapter plate |
|
| Author: | Dee [ Wed May 02, 2012 3:30 pm ] |
| Post subject: | Re: Vit Power Steer + Sierra Bolt On Kit [QLD] |
Bump! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|