| auszookers.com http://auszookers.com/forum/ |
|
| 82 and 92 zook bits, pistons+rings, wheel spacers http://auszookers.com/forum/viewtopic.php?f=7&t=31695 |
Page 1 of 1 |
| Author: | Zuzukie [ Fri Apr 06, 2012 6:57 pm ] |
| Post subject: | 82 and 92 zook bits, pistons+rings, wheel spacers |
Have to clean up around the garage a bit so found some reasonable stuff to sell 5x82 model rims with tyres (sunny style) $50 5x92 model rims and tyres $50 92 wt doors in white $50 each or both for $75. Now 50 for both 4 snake racing 2 inch wheel spacers $400 (these are $170 each brand new, $680 worth for $400) now $200 92 model wt rear windows (hard top) $20 each 82 model standard springs $20 for all 4 4 82 nt flares $20 92 wt chassis and hard top body (just about all parts have been removed) suit project/rebuild $offers Brand new 1.3 standard main bearings,big end bearings,rings,pistons on conrods and thrust washers Bought to rebuild my 1.3 but are all standard so are under sized $200 plus your old conrods Prob just a heap of shit but still cleaning up so will find more gear as i clean through and sort it out Can post at buyers expence |
|
| Author: | stockman [ Fri Apr 06, 2012 7:01 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
location? |
|
| Author: | Zuzukie [ Fri Apr 06, 2012 7:06 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
Mid north coast nsw |
|
| Author: | bogga [ Sat Apr 07, 2012 1:57 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
close to coffs?? |
|
| Author: | worldo [ Sat Apr 07, 2012 3:26 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
if your near coffs ill take both 92 model doors |
|
| Author: | Zuzukie [ Sun Apr 08, 2012 11:34 am ] |
| Post subject: | Re: 82 and 92 zook bits |
About 4hrs south of coffs |
|
| Author: | worldo [ Sun Apr 08, 2012 12:00 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
mhmm maybe a bit to far considering i wont to make half doors with them. |
|
| Author: | SuperZook092 [ Sun Apr 08, 2012 7:08 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
where abouts on the mid north coast?? may be interested in the doors Clint |
|
| Author: | OGJON [ Sun Apr 08, 2012 10:13 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
hmm you say 4 hours south of coffs does that make you near newy? if so then do you still have the set of 4 springs? |
|
| Author: | Zuzukie [ Mon Apr 09, 2012 6:28 am ] |
| Post subject: | Re: 82 and 92 zook bits |
About an hr north of newy at taree area Yes still have springs |
|
| Author: | Zuzukie [ Wed Apr 11, 2012 7:56 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
Bump. |
|
| Author: | dono1 [ Thu Apr 12, 2012 7:40 am ] |
| Post subject: | Re: 82 and 92 zook bits |
Do you have a WT output flange? |
|
| Author: | Zuzukie [ Mon Apr 16, 2012 6:16 am ] |
| Post subject: | Re: 82 and 92 zook bits |
Nah sorry mate dont have any that i know of |
|
| Author: | Zuzukie [ Mon Apr 16, 2012 4:48 pm ] |
| Post subject: | Re: 82 and 92 zook bits |
Bump. |
|
| Author: | Zuzukie [ Sat Apr 21, 2012 1:28 am ] |
| Post subject: | Re: 82 and 92 zook bits. Price drops |
Bump. |
|
| Author: | zooktastic [ Sat Apr 21, 2012 10:41 am ] |
| Post subject: | Re: 82 and 92 zook bits. Price drops |
have you still got the f10a? very keen. was it running well when removed aside from the possible head issue? |
|
| Author: | Zuzukie [ Mon Apr 23, 2012 6:55 pm ] |
| Post subject: | Re: 82 and 92 zook bits, rebuild parts |
Will swap parts for a 1L 4 speed box and jackshaft |
|
| Author: | SuperZook092 [ Mon Apr 23, 2012 8:22 pm ] |
| Post subject: | Re: 82 and 92 zook bits, rebuild parts |
dibs on the doors Clint |
|
| Author: | Zuzukie [ Fri Apr 27, 2012 5:42 pm ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, bearings, body nd ch |
Bumps |
|
| Author: | Zuzukie [ Sat Apr 28, 2012 4:44 pm ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, bearings, body nd ch |
Doors gone |
|
| Author: | Zuzukie [ Mon Apr 30, 2012 2:37 pm ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, wheel spacers |
Edited Bump |
|
| Author: | Zuzukie [ Tue May 01, 2012 2:32 pm ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, wheel spacers |
Am negotiable on prices |
|
| Author: | sprayzook [ Wed May 02, 2012 10:01 pm ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, wheel spacers |
still have wheel spacers? how much and price to post to vic 3274 |
|
| Author: | Zuzukie [ Sat May 05, 2012 7:48 pm ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, wheel spacers |
Need to get rid of some crap nd get some money for my 1.3 conversion i am negotiable with prices |
|
| Author: | Zuzukie [ Wed May 09, 2012 8:54 pm ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, wheel spacers |
Bumps |
|
| Author: | Zuzukie [ Thu May 17, 2012 11:56 am ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, wheel spacers |
Bump. |
|
| Author: | C.00.K13 [ Sun May 20, 2012 10:19 pm ] |
| Post subject: | Re: 82 and 92 zook bits, pistons+rings, wheel spacers |
Have u still got the wheel spacers??? Wat part of the north coast u on??? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|