auszookers.com
http://auszookers.com/forum/

Assorted bits, shed clean up (Brisbane)
http://auszookers.com/forum/viewtopic.php?f=7&t=34189
Page 1 of 1

Author:  Highway-Star [ Sun Jul 15, 2012 6:51 pm ]
Post subject:  Assorted bits, shed clean up (Brisbane)

Hi all.

Bit of a list of some things I'd like to clear up. Everything is pickup only, I am near Ipswich in QLD; PM if you're after something.


Free stuff (to be dumped soon):
- 1.3L Sierra front 4 pin carrier GONE
- 1.0L Sierra front diff centre 4.11 (may need new pinion seal)
- 1.3L Sierra passenger side transfer case arm
- Pair of water proof seat covers (plastic like material, faded black) GOING
- Pair of plastic trim things off Sierra targa bar (standard Suzuki bling)
- 1.3L Sierra 5 speed gearbox rear mount arm (the cast item)

$10 Stuff:
- Pair of 1L/NT rear axle shafts, with separate bearings retainers.
- Pair of reasonable LJ81 head rests
- Pair of Sierra above door pressed metal bars, black, have extra screw holes in them from a different soft top. (the piece between the windscreen and targa bar).
- Steel LJ50 parcel tray, surface rust.
- 1.3L Sierra washer bottle and washer motor.

$50 stuff:
- Pair of Sierra door windows, tinted. Note, have now noticed the passenger window has a tear in the tint. Still make good spares though, open to offers.
- Pair of Sierra full doors, red. Drivers door has severe damage (allot of work to repair). Passenger door minor dint. Both have reasonable door cards, and mechanisms etc.
- Pair of Sierra half doors, orange. GONE
- China soong air compressor and wiring, the one that comes with a china locker; never used. No locker bits or solenoids, plumbing etc. GONE
- Pair of 26 spline Side gears, suit 7" Suzuki diff, and some 6.5" (Super Carry, and Some Jimny front, maybe others...)
- Complete Vitara Transfer case, from a SE416 Estate wagon auto.


Other:
I still have some assorted LJ transfers and F8a engine bits laying around I wouldn't mind clearing up. Complete good transfers $100, less for parts or poorer cases. No good complete F8's, but allot of parts, and blocks suitable for rebuilds.

Also a set of 4x alloy wheels 15x8 5x5.5stud pattern. some sort of -ve offset. $400 set.

wheels:
Image

headrests:
Image

Parcel Tray:
Image

Cheers

Author:  Blakey [ Sun Jul 15, 2012 7:12 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

don't happen to have any WT transfers?

Author:  Highway-Star [ Sun Jul 15, 2012 7:20 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

Blakey wrote:
don't happen to have any WT transfers?



Not for sale, sorry.

Author:  xttoy [ Sun Jul 15, 2012 7:26 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

You wouldn't happen to have sierra front seats without rips in them?

Author:  tonka_tuff [ Sun Jul 15, 2012 7:40 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

hey mate keen for the compressor pm'd

Author:  Highway-Star [ Sun Jul 15, 2012 7:50 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

xttoy wrote:
You wouldn't happen to have sierra front seats without rips in them?



Haha, nah mate sorry, that is something I have never owned :( .
I got the old seats from my LJ (not factory LJ seats, don't know what they are though) which have some rips in them, and 1 broken seat rail. They are in the trailer ready to go to the dump; if you or anyone wanted to come grab them go for it!




Replied to your PM Tonka.

Author:  Highway-Star [ Sat Jul 21, 2012 12:59 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

Edited and bump...

Author:  charlie [ Mon Jul 23, 2012 6:32 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

Do you have any 1litre transfers.

Author:  Highway-Star [ Mon Jul 23, 2012 7:38 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

charlie wrote:
Do you have any 1litre transfers.


Nope, Only LJ.

Author:  Highway-Star [ Sat Aug 04, 2012 5:55 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

Bump...

Author:  Highway-Star [ Tue Sep 04, 2012 6:28 am ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

Bump.

Anyone interested in some of the reasonably sized items, I'll be at tough tracks at the springs this weekend, so can bring them with me...

Author:  matfan [ Tue Sep 04, 2012 10:14 am ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

I don't suppose you've got any 1.3 carbies laying around?

Author:  Highway-Star [ Tue Sep 04, 2012 5:03 pm ]
Post subject:  Re: Assorted bits, shed clean up (Brisbane)

matfan wrote:
I don't suppose you've got any 1.3 carbies laying around?



No sorry, swapped my last one for some 1L transfer flanges.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/