auszookers.com
http://auszookers.com/forum/

VIC - Vitara Winch Bar
http://auszookers.com/forum/viewtopic.php?f=7&t=35022		 Page 1 of 1
Author:  shaunem [ Fri Aug 17, 2012 12:08 pm ]
Post subject:  VIC - Vitara Winch Bar
Up for sale is a Suzuki Vitara Winch bar,

The bull bar comes with the mounting brackets/ bolts to be fitted on.

Bull bar came off a lwb, may fit a swb with modifications.

Willing to ship via courier at buyers expense, as well as the buyer organizing it.

Pick up from Melton, Victoria.

Looking for $285 ONO
Author:  tonyevans [ Fri Aug 17, 2012 5:22 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
Have you got all the fittings with it?
Author:  Joe [ Fri Aug 17, 2012 5:25 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
tonyevans wrote:
Have you got all the fittings with it?


shaunem wrote:
The bull bar comes with the mounting brackets/ bolts to be fitted on.
Author:  tonyevans [ Fri Aug 17, 2012 5:35 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
Joe wrote:
tonyevans wrote:
Have you got all the fittings with it?


shaunem wrote:
The bull bar comes with the mounting brackets/ bolts to be fitted on.

So I'm getting old :thefinger: :D :D
Author:  Joe [ Fri Aug 17, 2012 6:11 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
tonyevans wrote:
Joe wrote:
tonyevans wrote:
Have you got all the fittings with it?


shaunem wrote:
The bull bar comes with the mounting brackets/ bolts to be fitted on.

So I'm getting old :thefinger: :D :D


:lol:
Author:  alexxx [ Fri Aug 17, 2012 6:43 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
Ahahahaha
Author:  oohsam [ Fri Aug 17, 2012 10:14 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
Ahh far our. if it was a swb one I'd buy it no worries...its a royal pain to get the lwb to fit the swb body.

Good luck man. These things come up very rarley....stupid LWB.
Author:  salih [ Sat Aug 18, 2012 2:40 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
will this fit a gv easly or to much moding ??
Author:  DarkHorse [ Sat Aug 18, 2012 6:56 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
Custom brackets at least, big fella. Not sure how the front profiles compare... Fatz might.
Author:  Built4thrashing [ Sun Aug 19, 2012 8:49 am ]
Post subject:  Re: VIC - Vitara Winch Bar
GV's are wider. It it was from the late model V6 vits (sv620) then it could possibly fit. Go have a look as measure it up.
Author:  salih [ Mon Aug 20, 2012 6:50 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
ahh fuk ok thanks guys
Author:  shaunem [ Mon Aug 20, 2012 7:48 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
Thanks for the replies guys, bar is still available. Thought it would be gone sooner rather than later but not to be it seems.

Mrs has put the bar for sale on ebay and i had no idea. Listed with no reserve and ends in 1day!

Any questions feel free to ask.

Cheers
Author:  Theredrocket [ Tue Aug 21, 2012 12:34 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
oohsam wrote:
Ahh far our. if it was a swb one I'd buy it no worries...its a royal pain to get the lwb to fit the swb body.

Good luck man. These things come up very rarley....stupid LWB.



Ive got the same one, which i took off a LWB and put it on my swb, a few of the brakets i didnt put on if from memory cause they didnt line up properly and its a bit tight lining the bolts up on one side, I just took a big hammer to it an belted it in place. Its stuck there now its on so tight it wont budge. I havent had a problem yet with it and i havent been gental. in saying that i havent used my bull bar to anchor a snap strap to pull someone out.
its not that much of a effort to get it to fit, thats if you think the price is right
Author:  shaunem [ Sat Aug 25, 2012 9:34 pm ]
Post subject:  Re: VIC - Vitara Winch Bar
SOLD.... CHEERS
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/