auszookers.com
http://auszookers.com/forum/

A metric crapload of tools (NT)
http://auszookers.com/forum/viewtopic.php?f=7&t=36711		 Page 1 of 1
Author:  shep [ Sun Oct 28, 2012 3:36 pm ]
Post subject:  A metric crapload of tools (NT)
1x repco 6 draw box
2x1/4 inch socket sets
1x3/8 set with shallow and deep series sockets plus a stack of 3/8 extensions
1x1/2 socket set
1x1/2 impact socket set
One of the large draws is full of metric spanners. Stubby, normal and long. Plus 10 to 19 mm ratchet spanners
Large Draw full of screw drivers
large Draw of assorted air tools
Filter straps, vice grips, circlip plyers etc etc.

Most tools are lifetime replacement warranty
A metric crapload of tools :mrgreen:

Selling as I now need af tools and have been buying af/metric kits

$600

Image
Author:  laurie [ Sun Oct 28, 2012 4:01 pm ]
Post subject:  Re: A metric crapload of tools (NT)
if you hold them for pick up i'll give you 500
Author:  shep [ Sun Oct 28, 2012 5:00 pm ]
Post subject:  Re: A metric crapload of tools (NT)
Sorry mate I need the room and $600 is more then fair. The box on its own is $500 new.
Author:  just_cruizin [ Sun Oct 28, 2012 5:27 pm ]
Post subject:  Re: A metric crapload of tools (NT)
Let me know if you would consider selling stuff seperately. I'd take all the 3/8 stuff and the racket spanners
Author:  Scrawny [ Sun Oct 28, 2012 5:48 pm ]
Post subject:  Re: A metric crapload of tools (NT)
It's a pity it's so far away
Author:  Rusho [ Sun Oct 28, 2012 6:05 pm ]
Post subject:  Re: A metric crapload of tools (NT)
just_cruizin wrote:
Let me know if you would consider selling stuff seperately. I'd take all the 3/8 stuff and the racket spanners


x2 I will take the air tools and one 1/4 inch socket set pompoms
Author:  Shansh [ Sun Oct 28, 2012 6:56 pm ]
Post subject:  Re: A metric crapload of tools (NT)
i would be keen on the 1/2 inch drive set and the draw full of metric spanners
Author:  just_cruizin [ Sun Oct 28, 2012 7:58 pm ]
Post subject:  Re: A metric crapload of tools (NT)
Hey Rusho, we'll do a group buy and save on freight. :peaceout:
Author:  atari4x4 [ Sun Oct 28, 2012 8:05 pm ]
Post subject:  Re: A metric crapload of tools (NT)
what godawefullshitbox have you bought now? :lol:
Author:  Scrawny [ Sun Oct 28, 2012 8:06 pm ]
Post subject:  Re: A metric crapload of tools (NT)
just_cruizin wrote:
Hey Rusho, we'll do a group buy and save on freight. :peaceout:


Ill go in too :mrgreen:
Author:  just_cruizin [ Sun Oct 28, 2012 8:55 pm ]
Post subject:  Re: A metric crapload of tools (NT)
You need AF stuff just like Shep though.
Author:  shep [ Sun Oct 28, 2012 9:18 pm ]
Post subject:  Re: A metric crapload of tools (NT)
atari4x4 wrote:
what godawefullshitbox have you bought now? :lol:





Secret :thefinger:
Author:  want33s [ Mon Oct 29, 2012 4:04 pm ]
Post subject:  Re: A metric crapload of tools (NT)
Dodge/Chrysler/Valiant persuasion by any chance?
Author:  Marko_SJ [ Mon Oct 29, 2012 6:06 pm ]
Post subject:  Re: A metric crapload of tools (NT)
So it is a case of the metric crapload needing to stay together Shep?

I may be interested, either way.
Author:  shep [ Tue Oct 30, 2012 9:18 pm ]
Post subject:  Re: A metric crapload of tools (NT)
I don't have time to stuff around with posting stuff so will either sell it all together or shove it under a workbench and never see it again
Author:  shep [ Fri Nov 09, 2012 9:12 am ]
Post subject:  Re: A metric crapload of tools (NT)
Some pics. Won't split up

Image

Repco 1/2" impact sockets
Repco 3/8" set on rails
Repco 1/4" with shallow and deep. Uni is broken
Stanley 3/8 set
Tang 1/2 set
Plus bits and pieces ie breaker bar etc

Image

Air tools, ratchert spanners and a heap of spanners

Image

All sorts of stuff from feeler gauges to cold chisels to lock tight


Image

Screwdrivers etc


Image

Circlip plyers, filter strap, etc
Author:  ball [ Fri Nov 09, 2012 12:53 pm ]
Post subject:  Re: A metric crapload of tools (NT)
I am surprised you have anything in your toolbox other than several different hammers and a box of matches. :thefinger:

I did notice that you aren't selling the hammers and matches. :wink:
Author:  shep [ Fri Nov 09, 2012 1:46 pm ]
Post subject:  Re: A metric crapload of tools (NT)
I took the matches out cos I only have those big non safety cool ones. 3 draws in the roll cab are for my hammer collection.
Author:  TZAR [ Fri Nov 09, 2012 1:50 pm ]
Post subject:  Re: A metric crapload of tools (NT)
If they are quality tyre levers you should keep them. They are worth a bit of coin. and they are great for doing fan belts, levering shit and even changing tyres
Author:  shep [ Fri Nov 09, 2012 1:59 pm ]
Post subject:  Re: A metric crapload of tools (NT)
the leavers are dowidat :wink: 3 for sale but i still have a another 4 in the new box 8)
Author:  Marko_SJ [ Sun Nov 11, 2012 7:03 pm ]
Post subject:  Re: A metric crapload of tools (NT)
Sogone sold your bar, and he reckons his landlord dumped your rims.

It's gunna have to be cash mate, sorry.
Author:  ball [ Sun Nov 11, 2012 8:12 pm ]
Post subject:  Re: A metric crapload of tools (NT)
The_Amateur wrote:
Sogone sold your bar, and he reckons his landlord dumped your rims.


That fat fuck probably sold them and is now trying to blame someone else for his dishonesty.
Author:  shep [ Sun Nov 11, 2012 8:28 pm ]
Post subject:  Re: A metric crapload of tools (NT)
Tools sold pending payment/pickup
Author:  ball [ Sun Nov 11, 2012 8:49 pm ]
Post subject:  Re: A metric crapload of tools (NT)
shep wrote:
Tools sold pending payment/pickup


How much do I need to bid to get them instead :wink:
Author:  Marko_SJ [ Sun Nov 11, 2012 8:59 pm ]
Post subject:  Re: A metric crapload of tools (NT)
ball wrote:
The_Amateur wrote:
Sogone sold your bar, and he reckons his landlord dumped your rims.


That fat fuck probably sold them and is now trying to blame someone else for his dishonesty.


LOL. Not going there. :rambo:
Either way I cannot get em to shep.
Author:  shep [ Sun Nov 11, 2012 9:15 pm ]
Post subject:  Re: A metric crapload of tools (NT)
ball wrote:
shep wrote:
Tools sold pending payment/pickup


How much do I need to bid to get them instead :wink:


Haha a billet alloy boat. And make sure it is shiny :lol:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/