| auszookers.com http://auszookers.com/forum/ |
|
| QLD: Wrecking 01 1.6L Grand Vitara http://auszookers.com/forum/viewtopic.php?f=7&t=36727 |
Page 1 of 2 |
| Author: | nemesis2187 [ Mon Oct 29, 2012 9:04 am ] |
| Post subject: | QLD: Wrecking 01 1.6L Grand Vitara |
Located in Brisbane's south western suburbs (West Logan in other words) I've pretty much taken the whole car apart and from it i am keeping the engine, loom, ecu, front pipe, heater and air con setup and possibly (if its fits the sierra) the fuel tank everything else is for sale. Not exactly sure what the parts are worth if it were a nissan or toyota i would, anyway if my price is to high just PM me a fair offer Car had 130 000 on the clock Complete Front diff with hubs, brakes and suspension $250 Complete Rear diff with hubs brakes and suspension $250 Complete Soft top $100 (rear window part has a few tears on the plastic) Complete interior plastics including the whole dash $70 (will separate) Auto box complete with shifter, boot surround, torque convertor and flex plate $250 Front seats $100 Rear seats $100 (or both front and rear $150) Front grill $50 Head lights $120 for both Tail lights $70 for both (one has crack on it but ok) Tailgate $60 Bonnet $80 Tow bar $50 Radiator $50 Front bar with reo - $50 Rear bar with reo - $50 Wheels x5 (tyres are stuffed) $100 Steering rack and pinion $80 I missed other bits and pieces as it was a complete running car so if its not listed and your after a part just ask me Here are some pics |
|
| Author: | nemesis2187 [ Mon Oct 29, 2012 9:14 am ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
more pics |
|
| Author: | Kerrod [ Wed Oct 31, 2012 8:34 am ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
What speed is the auto? |
|
| Author: | Teracis [ Wed Oct 31, 2012 12:22 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Would you separate the hubs, spindles, locking and drive flanges from the diffs? All good if you're trying to sell them whole, I just don't need anything else off one. |
|
| Author: | tuffcoily [ Wed Oct 31, 2012 1:52 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
I bought one for the engine and loom also tried to get rid of the rest of it here but wasn't much interest so sold the whole lot to Suzi Autos at spring wood he pays good money for these |
|
| Author: | klutched [ Wed Oct 31, 2012 3:13 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Teracis wrote: Would you separate the hubs, spindles, locking and drive flanges from the diffs? All good if you're trying to sell them whole, I just don't need anything else off one. I'm getting the diffs  But what are you after? The gearing or housing?
|
|
| Author: | Teracis [ Wed Oct 31, 2012 3:54 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Hey mate, I'm after the front spindles and hubs (iirc all vit spindles and hubs are the same, I could get you to measure for me ) the EDIT: I think the drive flanges come off the front, they don't have locking hubs do they, I can get you a photo of what I'm chasing but not until anto86 gets home from work (he just got a set) he is going to measure it all up now for me though so we can check them.If I took some measurements and marked it up on the photo or pm them to you could you check if they are identical and tell me how much you want for these, if you're willing to part with them that is. It's so I can do a full float conversion on the rear of my sierra, regardless of whether the fronts are the same I definitely need the drive flanges from the rear. Cheers Tim |
|
| Author: | tanshi [ Wed Oct 31, 2012 4:01 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
teracis, you are after every thing from the end of the cv out. drive flanges your after are from the front aswell. |
|
| Author: | Teracis [ Wed Oct 31, 2012 4:05 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Thanks tanshi, I just had a phone call from tony to say the same thing, are you 100% that all vit front spindles are the same? I'd hate to end up with the wrong ones. |
|
| Author: | tanshi [ Wed Oct 31, 2012 4:13 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
not sure about GV spindles vs vitara ones. |
|
| Author: | Teracis [ Wed Oct 31, 2012 4:39 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Damn, I'll get them measured then, I'll still need the drive flanges. Anyone else have an idea? |
|
| Author: | cooperrat [ Wed Oct 31, 2012 5:29 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Would you post the seat belts and the plastic tunnel bit around the handbrake to 2107 and how much cheers john |
|
| Author: | nemesis2187 [ Thu Nov 01, 2012 7:48 am ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Kerrod wrote: What speed is the auto? 3 Speed auto it has 1, 2, D |
|
| Author: | nemesis2187 [ Thu Nov 01, 2012 7:49 am ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Teracis wrote: Would you separate the hubs, spindles, locking and drive flanges from the diffs? All good if you're trying to sell them whole, I just don't need anything else off one. Klutched is picking up the rolla with the complete front and rear diffs so once he has it be sure to ask him for what ur after |
|
| Author: | nemesis2187 [ Thu Nov 01, 2012 8:15 am ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
cooperrat wrote: Would you post the seat belts and the plastic tunnel bit around the handbrake to 2107 and how much cheers john which seats belts u after front or rears? postage would be roughly $20 according to oz post, price on belts and plastic bit $50 plus post? |
|
| Author: | Teracis [ Fri Nov 02, 2012 1:39 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Whoever is getting the front diff from this can you swing me a PM please, I'm still interested in the hubs, spindles and drive flanges. Nemesis are you willing to part more yet? |
|
| Author: | Gwagensteve [ Fri Nov 02, 2012 4:04 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
nemesis2187 wrote: Kerrod wrote: What speed is the auto? 3 Speed auto it has 1, 2, D That auto should be an AW-4. I'm not aware of any GV's with a three speed auto anywhere in the world. AW-4's only have PRND21 on the shift rail, 4th is engaged by button on the shifter. PS how come the build plate has the constructor as CAMI Automotive, Canada on it????? Were GV"s really made in canada? Steve |
|
| Author: | tanshi [ Fri Nov 02, 2012 4:07 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
maybe its like the softtop jimny being made in spain. the softop GV could have been built in canada |
|
| Author: | Gwagensteve [ Fri Nov 02, 2012 4:55 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Well, according to a VIN decoder based on the build plate, that car was indeed made in Canada. Golly. Steve. |
|
| Author: | Bugsta [ Sun Nov 04, 2012 7:38 am ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
I am afer just drive flanges if available. |
|
| Author: | Teracis [ Sun Nov 04, 2012 1:11 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Bugsta wrote: I am afer just drive flanges if available. Already asked him for spindles hubs and drive flanges mate! |
|
| Author: | nemesis2187 [ Mon Nov 05, 2012 8:34 am ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Okay so i had abit more time on my hands so i completely stripped the GV... chucked the shell on the back of the ute to the scrappers and the rest has been left behind Here are some more pics of other things left behind |
|
| Author: | Aaron [ Mon Nov 05, 2012 12:24 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Hey mate ill take the drive flanges off the front if no one else does |
|
| Author: | Teracis [ Mon Nov 05, 2012 12:42 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Aaron wrote: Hey mate ill take the drive flanges off the front if no one else does Too late bloke, already arranged
|
|
| Author: | Aaron [ Mon Nov 05, 2012 5:22 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Teracis wrote: Aaron wrote: Hey mate ill take the drive flanges off the front if no one else does Too late bloke, already arranged dang 
|
|
| Author: | cooperrat [ Mon Nov 05, 2012 6:12 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
cheers for tunnel and belts great service |
|
| Author: | nemesis2187 [ Tue Nov 06, 2012 7:04 am ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
cooperrat wrote: cheers for tunnel and belts great service Shit that arrived quickly, i only posted it on friday. Anyway good to hear that it arrived in one piece |
|
| Author: | tanshi [ Tue Nov 06, 2012 2:58 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
whoever gets the rear diff. if you only want the centre im happy to take the housing etc off ya. |
|
| Author: | nemesis2187 [ Sat Nov 17, 2012 9:11 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Front spindles, flanges and brakes - sold tow bar - sold radiator - sold below are pics of whats left of diffs come on people make an offer on this stuff!! |
|
| Author: | swifty_ano [ Sat Nov 17, 2012 9:20 pm ] |
| Post subject: | Re: QLD: Wrecking 01 1.6L Grand Vitara |
Anyone know if the auto and t/case will suit my vitara? |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|