I have an exhaust manifold for a Baleno..
But not compatible for RWDNo P/S pump bracket.
| auszookers.com http://auszookers.com/forum/ |
|
| G16b engine parts http://auszookers.com/forum/viewtopic.php?f=7&t=39484 |
Page 1 of 1 |
| Author: | buzbox [ Sun Mar 10, 2013 11:26 am ] |
| Post subject: | G16b engine parts |
I've got a little stock pile of various G16b engine parts and shit bits from later model Vitara and Baleno. I have almost everything but no blocks. 16v heads, intake mani's, valve covers, camshafts, Pistons, con rods, alternators etc. Ask and I'll see if I have it. $$ open to offers, post extra |
|
| Author: | buzbox [ Fri Mar 15, 2013 8:54 am ] |
| Post subject: | Re: G16b engine parts |
bump. |
|
| Author: | N1K [ Fri Mar 15, 2013 9:19 am ] |
| Post subject: | Re: G16b engine parts |
How much are you chasing for a 16v head with intake manifold? |
|
| Author: | buzbox [ Fri Mar 15, 2013 12:45 pm ] |
| Post subject: | Re: G16b engine parts |
Considering the cost of getting it to you, hows $100. |
|
| Author: | Parry [ Fri Mar 15, 2013 5:53 pm ] |
| Post subject: | Re: G16b engine parts |
Do you have an air intake sensor, starter motor for g16b? |
|
| Author: | buzbox [ Fri Mar 15, 2013 6:10 pm ] |
| Post subject: | Re: G16b engine parts |
Starter motor, a bit grubby, unsure of condition - Yes, $20 + post Air intake sensor? do you mean airflow meter? - No |
|
| Author: | jimnynutter [ Sun Mar 17, 2013 2:00 pm ] |
| Post subject: | Re: G16b engine parts |
Exhaust manifold? |
|
| Author: | TWINCAM16 [ Wed Mar 20, 2013 7:30 pm ] |
| Post subject: | Re: G16b engine parts |
hi mate, you dont have a mounting bracket for a power steering pump? |
|
| Author: | buzbox [ Thu Mar 21, 2013 8:00 pm ] |
| Post subject: | Re: G16b engine parts |
I have an exhaust manifold for a Baleno.. But not compatible for RWDNo P/S pump bracket. |
|
| Author: | cal213 [ Fri Mar 22, 2013 10:22 am ] |
| Post subject: | Re: G16b engine parts |
Do you have any camshafts with 11 pickup lugs for the sensor and no dizzy gear? Jimny 1.6 conversion :p |
|
| Author: | buzbox [ Sat Mar 23, 2013 8:44 pm ] |
| Post subject: | Re: G16b engine parts |
I have 2 vitara and 1 baleno cams, it seems that the dist gear can be pressed off. |
|
| Author: | buzbox [ Mon Mar 25, 2013 8:16 am ] |
| Post subject: | Re: G16b engine parts |
Bump! |
|
| Author: | UHOH [ Mon Mar 25, 2013 7:48 pm ] |
| Post subject: | Re: G16b engine parts |
Do you have the thermo housing and the right angle outlet |
|
| Author: | Sweenz [ Tue Mar 26, 2013 11:57 am ] |
| Post subject: | Re: G16b engine parts |
alternator mate? how much? |
|
| Author: | jimnynutter [ Tue Mar 26, 2013 8:37 pm ] |
| Post subject: | Re: G16b engine parts |
Wheel studs and nuts? If they are in good nick? |
|
| Author: | ozhummer [ Tue Mar 26, 2013 9:19 pm ] |
| Post subject: | Re: G16b engine parts |
Im after a g16b dizzy and brackets for the air cond compressor with power steering pump from a vit jlx ? |
|
| Author: | buzbox [ Wed Mar 27, 2013 8:26 pm ] |
| Post subject: | Re: G16b engine parts |
Thermo housing $10 Alternator $50 Wheel studs are not engine parts Right angle dist or straight, off the baleno? I presume right angle $80 (later model g16b vitara) P/s bracket $10 air con is a separate bracket which Im hanging onto in case I decide to put it back on. |
|
| Author: | ozhummer [ Wed Mar 27, 2013 8:42 pm ] |
| Post subject: | Re: G16b engine parts |
I have the ps bracket, just need the ac one!  Dizzy i think is straight! Opposide side to g16a... What cond? Does it need seals etc as newbies are avail for 170 ish out of te usa..... |
|
| Author: | TWINCAM16 [ Thu Mar 28, 2013 3:25 am ] |
| Post subject: | Re: G16b engine parts |
dont have a power steering pump bracket off a 1.6? |
|
| Author: | buzbox [ Thu Mar 28, 2013 2:37 pm ] |
| Post subject: | Re: G16b engine parts |
Condition is used  I took the cap off both and seems ok, the bits dizzy has the seal missing,have check the baleno one, but either way you'd ne better off replacing the seal.P/S bracket, see 2 posts above.
|
|
| Author: | TWINCAM16 [ Fri Mar 29, 2013 12:02 am ] |
| Post subject: | Re: G16b engine parts |
pm'ed |
|
| Author: | nick_bj40 [ Sat Mar 30, 2013 5:17 am ] |
| Post subject: | Re: G16b engine parts |
Do u have any coil pack baleno heads? If yes how much for full top end, wiring and computer?? |
|
| Author: | jonno_racing [ Sat Mar 30, 2013 7:49 am ] |
| Post subject: | Re: G16b engine parts |
do you have any coil pack balino cam shafts? |
|
| Author: | smithy- [ Sun Apr 07, 2013 10:47 am ] |
| Post subject: | Re: G16b engine parts |
do you have the bottom timing gear gear to suit jimny g16bb |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|