| auszookers.com http://auszookers.com/forum/ |
|
| WA - fs wt transfer 6.4:1, rocker slider and jimny bits http://auszookers.com/forum/viewtopic.php?f=7&t=39592 |
Page 1 of 1 |
| Author: | Nubbles [ Thu Mar 14, 2013 4:46 pm ] |
| Post subject: | WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
Hey guys Change of plans on moddin my jimny any further. *only looking for local sales atm, sorry* Got a wt transfer with trialtough 6:4.1 gears - SOLD Offroad amoury rock sliders. SOLD Offroad amoury axle armour kit SOLD Jimny tough dog 3" springs with abit suzuki lean $10 - will find the bin if no wants em Jimny stock castor arms - set $20 - will find the bin also Jimny rear tailshaft (g13bb, manual) $20 Jimny jackshaft $20 G13BB block and head - bottom end was rebuild not long before i got a g16b, comp was down cylinder 3 by 50psi, suspect head - never checked as i had the 16 ready to go free - come collect it Thanks |
|
| Author: | Amog [ Thu Mar 14, 2013 6:36 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
pictures? |
|
| Author: | also76 [ Thu Mar 14, 2013 10:41 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
http://www.offroad-armory.com/store/ <---- pics of sliders and diff stuff. |
|
| Author: | also76 [ Thu Mar 14, 2013 10:43 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
if the sliders and diff gear will suit my WT ill take em ya fag. can sling ya some $$ for deposit when ya get back in town. as for price, how about $50 and i shout ya chicken treat ? hahaha.... seriously, hold em till we find out if they will fit. does anyone here know if the diff/axle gear will fit to sierra wt ?? or could be made to easily ?? |
|
| Author: | monley [ Thu Mar 14, 2013 10:49 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
also76 wrote: if the sliders and diff gear will suit my WT ill take em ya fag. can sling ya some $$ for deposit when ya get back in town. as for price, how about $50 and i shout ya chicken treat ? hahaha.... seriously, hold em till we find out if they will fit. does anyone here know if the diff/axle gear will fit to sierra wt ?? or could be made to easily ?? The rear truss should be a pretty close fit. The front should also be pretty close. Truss might be a tad to long, but nothing a grinder cant fix. |
|
| Author: | Alex4wd [ Thu Mar 14, 2013 11:23 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
Photo of the sliders man?? |
|
| Author: | Fatzook [ Thu Mar 14, 2013 11:54 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
If the sliders are for a Jimny, they will NOT fit a sierra. Jimny has a longer wheel base, and VERY different chassis layout. |
|
| Author: | Nubbles [ Fri Mar 15, 2013 12:06 am ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
Sorry guys no pics, as im offshore at the moment Yeah but if u look at offroad armoury website its all as is from them Also76 ill hold onto the sliders and diff stuff, and we can trial fit em when im back |
|
| Author: | Docka83 [ Fri Mar 15, 2013 5:12 am ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
If the diff stuff doesn't fit I'll take if your happy for me to freight to east coast? |
|
| Author: | Greeno [ Fri Mar 15, 2013 8:34 am ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
So the transfer and gears are Wt sierra ones? And will bolt into sierra (Beginner here) or are they only for jimny? If it will bolt into wt sierra i have a standard case and i am needing gears... |
|
| Author: | nick_bj40 [ Fri Mar 15, 2013 8:44 am ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
If your keen to ship the gears im keen I have 1 switched and 1 non switched case and ill cover all freight |
|
| Author: | jimny_timmy [ Fri Mar 15, 2013 3:08 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
Fatzook wrote: If the sliders are for a Jimny, they will NOT fit a sierra. Jimny has a longer wheel base, and VERY different chassis layout. The mounting brackets will be waaaay different like you said, but these come in bits and you weld everything together. So the actual slider may fit but you would need to fabricate some mounts. |
|
| Author: | Nubbles [ Fri Mar 15, 2013 3:50 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
Transfer is a wt sierra transfer and will bolt in. Sliders and diff amour on hold Transfer on hold Till im back in perth and able to sort things out easily The mounts and post are not welded to the sliders, so im sure can easily fit a sierra, pretty sure offroad amoury sliders for sierra and jimny r the same the same slider Sorry nick_bj40 at the moment lookin for local as i need a straight swap so my jimny aint off the road |
|
| Author: | nick_bj40 [ Fri Mar 15, 2013 8:40 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
If you get stuck let me know I can always express ship it to you if you need it quickly |
|
| Author: | Fatzook [ Fri Mar 15, 2013 11:26 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
Nubbles wrote: The mounts and post are not welded to the sliders, so im sure can easily fit a sierra, pretty sure offroad amoury sliders for sierra and jimny r the same the same slider Seriously. They are completely different. The length of a Jimny slider is roughly 200mm more than a SWB sierra, and 175mm less than a LWB sierra. If you look at the pics on their website, you will see that they are infact a different slider. It would suck if some poor sap bought these with the intent to fit them to their sierra, based on the information you have given, only to find that it would be more work modding them to fit than building from scratch. |
|
| Author: | Nubbles [ Sat Mar 16, 2013 7:57 am ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
sorry mate was just goin off the pics on there website. also76 we can still trial and c if its possible |
|
| Author: | cal213 [ Fri Mar 22, 2013 10:35 am ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
Still got the ora gear? Wouldn't mind that for myself!! |
|
| Author: | Nubbles [ Thu Apr 04, 2013 9:01 am ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
bump updated and parts added |
|
| Author: | Nubbles [ Tue Apr 09, 2013 12:04 pm ] |
| Post subject: | Re: WA - fs wt transfer 6.4:1, rocker slider and jimny bits |
Bump About ready 2 bin all this stuff |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|