Needs a price mate
viewtopic.php?f=7&t=39781
| auszookers.com http://auszookers.com/forum/ |
|
| G16A - Excellent Condition - SOLD! http://auszookers.com/forum/viewtopic.php?f=7&t=39818 |
Page 1 of 1 |
| Author: | ozhummer [ Sun Mar 24, 2013 5:57 pm ] |
| Post subject: | G16A - Excellent Condition - SOLD! |
As part of my Vitara restoration, I am doing a G16B conversion. I am going to sell it's G16A. Although I dont know the history of this motor, I can say it starts and runs perfectly. Compression is excellent and very uniform indicating a recent rebuild. It does not blow any smoke at anytime. I have replaced the vaccum hoses with silicon, and it has a new thermostat, I will do a full service on it before it leaves. I dont have a firm price, but am happy for offers - PM me. Cheers Keith |
|
| Author: | Joe [ Sun Mar 24, 2013 6:31 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Needs a price mate viewtopic.php?f=7&t=39781 |
|
| Author: | ozhummer [ Sun Mar 24, 2013 6:43 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Not sure what its worth, im open to offers! |
|
| Author: | Scrawny [ Sun Mar 24, 2013 6:54 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
I got $20 |
|
| Author: | ozhummer [ Sun Mar 24, 2013 6:59 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Hmmmm, ill get back back to you.... |
|
| Author: | Scrawny [ Sun Mar 24, 2013 7:08 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Post up what you expect or would like to get for it |
|
| Author: | Scrawny [ Sun Mar 24, 2013 7:10 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Have you seen my pm too? |
|
| Author: | ozhummer [ Sun Mar 24, 2013 7:19 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
OK - Im after $800. There are a couple around all are more expensive. I'm, in brisbane and will not be able to freight it unless you organise collection.. |
|
| Author: | ozhummer [ Thu Mar 28, 2013 2:45 pm ] |
| Post subject: | Re: G16A - Excellent Condition Price Drop to $500 |
Ill drop the price to $500 'to get rid of this - otherwise I might part it out (shame as it goes nicely).. It's out of the car, ready to loaded into someones trailer 
|
|
| Author: | alexvitara [ Mon Apr 01, 2013 7:54 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
What acc. Does it come with? |
|
| Author: | ozhummer [ Mon Apr 01, 2013 10:51 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Alt, starter, dizzy, carb, flywheel and a pretty good clutch, can also have the radiator that is pretty good too. Air cleaner, coil. |
|
| Author: | wrboy89 [ Tue Apr 02, 2013 7:48 am ] |
| Post subject: | Re: G16A - Excellent Condition |
Were at on Brisbane r u mate |
|
| Author: | ozhummer [ Tue Apr 02, 2013 8:03 am ] |
| Post subject: | Re: G16A - Excellent Condition |
Bayside - manly |
|
| Author: | wrboy89 [ Tue Apr 02, 2013 5:54 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Ok sweet I'm at capalaba looking at a cheap vitara Saturday(blown motor) if the motor is still On here I'll pm ya |
|
| Author: | ozhummer [ Tue Apr 02, 2013 7:58 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
OK - No prob .. |
|
| Author: | ozhummer [ Sun Apr 07, 2013 8:53 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
This is still available ... Anyone ?? |
|
| Author: | Dieselsuzi [ Sun Apr 07, 2013 9:59 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Ozhummer, can you call me? 0438735394 I can't send PMs |
|
| Author: | danw [ Mon Apr 08, 2013 12:44 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
hey mate, doesnt happen to have a 3sp Auto attached to it does it? cheers Dan |
|
| Author: | Scrawny [ Mon Apr 08, 2013 12:48 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
danw wrote: hey mate, doesnt happen to have a 3sp Auto attached to it does it? cheers Dan I'd say, considering it has clutch and flywheel, there will be no auto. I will have one out shortly if you want |
|
| Author: | ozhummer [ Mon Apr 08, 2013 2:01 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Sorry- From a Manual - it has the flywheel and a pretty new clutch too! .. |
|
| Author: | ozhummer [ Mon Apr 22, 2013 10:32 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Price drop to $350 ... |
|
| Author: | d1mitch [ Tue Apr 23, 2013 11:10 am ] |
| Post subject: | Re: G16A - Excellent Condition |
i really wish you were in perth, we get nothing over here. out of interest any idea what freight would cost? |
|
| Author: | moe.14 [ Tue Apr 23, 2013 2:42 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
Any idea what the whole set up would weigh mate? |
|
| Author: | ozhummer [ Tue Apr 23, 2013 4:09 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
at least 100 kg |
|
| Author: | Scrawny [ Tue Apr 23, 2013 4:50 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
ozhummer wrote: at least 100 kg Na, 60kg at best |
|
| Author: | ozhummer [ Tue Apr 23, 2013 4:54 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
feels heavy ....
|
|
| Author: | camskea [ Tue Apr 23, 2013 10:15 pm ] |
| Post subject: | Re: G16A - Excellent Condition |
can you drop it at a depot for me to frieght to Melbourne?? |
|
| Author: | ozhummer [ Thu Apr 25, 2013 9:42 pm ] |
| Post subject: | Re: G16A - Excellent Condition SOLD! |
Gonesky |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|