| auszookers.com http://auszookers.com/forum/ |
|
| sierra bits and pieces http://auszookers.com/forum/viewtopic.php?f=7&t=39958 |
Page 1 of 1 |
| Author: | Joshyboy26 [ Sun Mar 31, 2013 8:36 pm ] |
| Post subject: | sierra bits and pieces |
hi guys have a few bits and bobs laying around i want to get rid of. 1 set of stock wt cvs good knick had them as spares. havent used them just sat in the shed. been wrapped up in a rag full of grease so they are still good. $50 1 front diff centre 22 spline wt 3.7s good knick wrapped in a rag and plastic, i had it as a spare never been in my car but looks good and spins nice. $150 1 tough rear diff setup. 25mm shaved off the housing with 6mm plate welded in place. no leaks. i believe a lock rite auto locker. ( i bought it with it installed.) calmini hd rear shafts. rear discs. mazda 323 rear calipers on sierra front discs. these calipers were chosen as they have a handbrake setup on them. new bearings and seals a few thousand kms old. will come with new pads as well. this setup will bolt straight into your car and the brakes bolt straight in for instant locker and rear brakes! pics in my build thread $500 heres my build thread. http://auszookers.com/forum/viewtopic.p ... 0&start=30 feel free to contact me on here or call/msg me on 0409891648 edited for stuff sold |
|
| Author: | Gwagensteve [ Mon Apr 01, 2013 4:47 pm ] |
| Post subject: | Re: sierra bits and pieces |
I'll grab the front housing Josh. Steve. |
|
| Author: | Joshyboy26 [ Mon Apr 01, 2013 5:13 pm ] |
| Post subject: | Re: sierra bits and pieces |
Ah! you just got beaten, a guy just msged me before saying he wants it, sorry steve. if it falls through its yours |
|
| Author: | Gwagensteve [ Mon Apr 01, 2013 5:43 pm ] |
| Post subject: | Re: sierra bits and pieces |
No sweat, keep me posted. Steve. |
|
| Author: | Matthew [ Mon Apr 01, 2013 7:37 pm ] |
| Post subject: | Re: sierra bits and pieces |
Steve, I think I have a spare housing. |
|
| Author: | Joshyboy26 [ Thu Apr 04, 2013 8:38 pm ] |
| Post subject: | Re: sierra bits and pieces |
sorry steve its gone |
|
| Author: | Joshyboy26 [ Thu Apr 11, 2013 9:39 am ] |
| Post subject: | Re: sierra bits and pieces |
bump it up |
|
| Author: | jimny641 [ Thu Apr 11, 2013 12:25 pm ] |
| Post subject: | Re: sierra bits and pieces |
I need the 3 flanges off a wt transfer if your got any. |
|
| Author: | Joshyboy26 [ Thu Apr 11, 2013 5:45 pm ] |
| Post subject: | Re: sierra bits and pieces |
sorry ive only got the flanges on the transfer and i dont really want to split it at the moment but ill keep you posted if anything changes |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|