auszookers.com
http://auszookers.com/forum/

QLD Brisbane - SV620 Part out
http://auszookers.com/forum/viewtopic.php?f=7&t=41231		 Page 1 of 2
Author:  wiked111 [ Tue Jun 04, 2013 1:16 pm ]
Post subject:  QLD Brisbane - SV620 Part out
Hi Guys,

My trusty SV620 isn't playing ball anymore, The valve stem steals have gone & I just can't be bothered fixing the old girl anymore. has 276 on the clock 4 speed auto, Black...


Am Parting it out, Please either PM me or post below what you are after and an offer. I also have a spare power steering box, front bumper, top glove box compartment with lid ) but clip is broken & indicator shroud. ( note the white sunnies are already sold ) And yes the fuel tank is pretty dent free, I also have a near new bash plate for the front.

Image
Image
Image

Now Wrecking Pickup location Mt Gravatt

Parts left include right CV $40
Top Glove box $60
Bash Plate $80
Power Steering setup make an offer
Back diff make an offer
40mm lift King Springs and suzisport shocks probably fitted about 15, 20K ago open to offers
back door make an offer.

plus many more available parts.
Author:  tanshi [ Tue Jun 04, 2013 1:24 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
how much are you chasing for the whole? keeping in mind that every thing on here must have a price
Author:  atari4x4 [ Tue Jun 04, 2013 1:40 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
bung a h25a in tanshi, you know you want to join the IFS crew. :P
Author:  tanshi [ Tue Jun 04, 2013 1:57 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
dont tempt me!!!!
Author:  alexvitara [ Tue Jun 04, 2013 2:11 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
I'd take some bits if you parted
Author:  wiked111 [ Tue Jun 04, 2013 3:09 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Ok, Since I really had to put a price I have, But seriously make an offer, Which parts would you be after alex ?
Author:  tanshi [ Tue Jun 04, 2013 3:12 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
are the alloys in the pics with it? both sets of wheels?
Author:  wiked111 [ Tue Jun 04, 2013 3:17 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
alloys are with it, But The sunnies are gone, Already sold. Has to be worth more, Has the same front bar as Atari's SV620 8)
Author:  boost=money [ Tue Jun 04, 2013 3:22 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
dose it have the larger front brakes that r used for sierra upgrade?
if so how much for calipers and rotors? send me a pm
Author:  tanshi [ Tue Jun 04, 2013 3:26 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Nope, you want the 1.6 brakes this is a V6
Author:  wiked111 [ Tue Jun 04, 2013 3:27 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
To be honest, I haven't been following the sierra scene if forever I'm not to sure if they are the same ( i don't think they are, pretty sure they are 2 big ). Will work out pricing for parts if no-one makes an offer on the whole car.
Author:  wiked111 [ Tue Jun 04, 2013 3:29 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Come on Tanshi, I know you wanna PM me with an offer. The new car gets delivered on June 29th, So would like to find this a new home by then. Besides, I'm not allowed anymore toys till this goes :( ( wife's orders )
Author:  bigrig91 [ Tue Jun 04, 2013 5:10 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Do it tanshi. there is even a cheap h25a that needs water pump and timing chains on ebay at the moment just waiting to go in.
Author:  Brett [ Tue Jun 04, 2013 6:41 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
If it gets parted I'm after the steering wheel
Author:  DarkHorse [ Tue Jun 04, 2013 8:59 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Pics of bash plate?

Otherwise I'd probably grab:
Rear bumper
Both front arches/flares and inner linings

Probably some other bits and pieces I can't think of at the moment...
Author:  scottysj80 [ Tue Jun 04, 2013 9:33 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Dibs on the centre console with cup holders if it has them :)
Author:  Macca52 [ Wed Jun 05, 2013 6:29 am ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
I will buy the complete power steering setup if you part it out
Macca
Author:  #ROSH# [ Wed Jun 05, 2013 10:06 am ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Are you parting this? whats the front bar worth?
Author:  alexvitara [ Wed Jun 05, 2013 4:52 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
#ROSH# wrote:
Are you parting this? whats the front bar worth?


I already got dibs rosh :wink:
Author:  wiked111 [ Wed Jun 05, 2013 5:16 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Hi Guys,

Alright, I have been doing the numbers and If everyone can wait till about the 25th of june I will part it out. It'll be a case of putting it up on jacks and self serve pretty much.
Author:  DarkHorse [ Wed Jun 05, 2013 8:10 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
That's not ideal for me :lol:
Author:  wiked111 [ Wed Jun 05, 2013 9:59 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
You still chasing my fuel tank darkhorse ?
Author:  tanshi [ Thu Jun 06, 2013 8:04 am ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
might be interested in rear diff. price?
Author:  DarkHorse [ Fri Jun 07, 2013 11:46 am ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
DarkHorse wrote:
Pics of bash plate?

Otherwise I'd probably grab:
Rear bumper
Both front arches/flares and inner linings

Probably some other bits and pieces I can't think of at the moment...


Fuel tank is sorted, see above...
Author:  wiked111 [ Tue Jul 09, 2013 3:50 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Ok Guys, Am Parting out, Prices are based on make an offer. Car is mostly complete minus wheels, left CV, front bar and snorkel.. Bashplate and center console with cup holders available as well and top glove compartment and though the latch broke. it's still very useable.
Author:  vitzookman [ Tue Jul 09, 2013 4:19 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
Is it drivable ? Price for the whole thing?

Edit - seen valve stem issue, can it drive at all or is it an anchor?
Author:  wiked111 [ Tue Jul 09, 2013 5:49 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
It was drivable before alex took so parts, It's no missing its front left CV and it's wheels and the right hand front quarter panel other than that it's all good. Motor and box otherwise fine.
Author:  DarkHorse [ Sat Jul 13, 2013 6:56 pm ]
Post subject:  Re: QLD Brisbane - SV620 Possible part out
DarkHorse wrote:
Pics of bash plate?
Rear bumper
Probably some other bits and pieces I can't think of at the moment...


Modified for currency...
Author:  wiked111 [ Mon Jul 15, 2013 8:30 am ]
Post subject:  Re: QLD Brisbane - SV620 Part out
Sorry Dark horse, I've been away and slow of posting pics. Pic of bash plate now added.
Author:  DarkHorse [ Wed Jul 17, 2013 2:45 pm ]
Post subject:  Re: QLD Brisbane - SV620 Part out
I might grab that. Can you get a freight quote to Rozelle, 2039 for me?

Do you still have front flares and inner linings, including all those horrible little clips? Rear bumper?
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/