I just got a text back. Apparently its all been thrown out.
- Tim.
| auszookers.com http://auszookers.com/forum/ |
|
| CHEAP 16V eng & other CHEAP bits http://auszookers.com/forum/viewtopic.php?f=7&t=41587 |
Page 1 of 1 |
| Author: | GOMEZ [ Tue Jun 25, 2013 10:31 am ] |
| Post subject: | CHEAP 16V eng & other CHEAP bits |
Hi one & all, boys & girls. Im getting out of the zook scene after 20+'s years.I have no further use for these good bits I have up for sale. I have a beleno t/body 16v eng with comp & loom for sale, only needs a dizzy, 160klms on eng $400 Vit 16V extractors with cat used $ 80 94 Model vitara dentless swb petrol tank $ 60 1 ltr t case no flanges $100 W/track t-case with new seals bearings complete unit $200 W/Track F & R tail shafts with good u-joints $100 the pair Factory new never fitted 94 Vit lwb tail shaft $200 31-10.5-15 nankang 85% tred mud terrains x 5 on 15x7 sunnies $600 Joeblow style vitara box with moded vit transfer case & short jack shaft (for twin stick setup) never fitted $800 Good condition 90's GTI front seats $120 the pair Good condition WRX Front seats $250 the pair Sold 4 Lj80 standard wheels with crappy tyres $ 50 4 Alloy Gold B/Globe 15x7 wheels only $ 80 4 Lada Niva 15x6 sunnies 1/4 inch thic centre/face $ 60 I also have a P3 computer (early vit) & complete wiring loom set up for Sierra conversion & a complete intake manifold . $450 The prices are firm. No pics as Im to old to know how to load. Buyer to arrange own Pickup from melb Either pm me or call 0402460578 |
|
| Author: | remickz [ Tue Jun 25, 2013 2:37 pm ] |
| Post subject: | Re: Cheap 16V eng & other bits |
Hey Gomez, I am chasing the 16v Engine due to my head problems, You can see here... Do you have any details on the engine (Km's, Condition)? I would not need the harness or computer (if you were willing to separate at all). Thanks a lot, i am in Western Melbourne, where abouts are you located? |
|
| Author: | GOMEZ [ Wed Jul 03, 2013 5:26 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Bump bump |
|
| Author: | camskea [ Wed Jul 03, 2013 7:10 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Hi mate, was this engine in a vitara? |
|
| Author: | GOMEZ [ Thu Jul 04, 2013 3:55 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Hi camskea Its out of a beleno. |
|
| Author: | Gwagensteve [ Thu Jul 04, 2013 7:55 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Hi mate, what brand/ what can you tell me about the extractors. I'm chasing a set. |
|
| Author: | GOMEZ [ Fri Jul 05, 2013 4:50 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Hi Steve The extractors are Lukey brand & the cat on it is standard vit. |
|
| Author: | tim80z [ Fri Jul 05, 2013 8:18 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
PM sent re bathurst globes. - Tim. |
|
| Author: | GOMEZ [ Sat Jul 06, 2013 10:05 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Pm sent back, Thanks |
|
| Author: | cal213 [ Sat Jul 06, 2013 11:49 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Would you split the driveshafts? Chasing a front wt |
|
| Author: | FullyZooked [ Tue Jul 09, 2013 1:55 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
What's the go with the gearbox and transfer? Modded how? Haha joeblow style means? I'm chasing a transfer with reduction gears fitted. |
|
| Author: | GOMEZ [ Tue Jul 09, 2013 6:26 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
cal213 wrote: Would you split the driveshafts? Chasing a front wt Hi Sorry but I would prefer to sell them as a pair. GOMEZ |
|
| Author: | tim80z [ Sun Jul 14, 2013 9:24 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Still interested in the globes. As discussed, if you can text or email me the photos that would be great. - Tim. |
|
| Author: | aznstyler [ Sun Jul 14, 2013 6:31 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Have a altenator? |
|
| Author: | Jimmy! [ Sun Jul 14, 2013 9:34 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Did the baleno engine sell? |
|
| Author: | Gwagensteve [ Wed Jul 17, 2013 5:26 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Sorry for not getting back to you sooner Gomez, I'll take the extractors if you still have them Steve. |
|
| Author: | tim80z [ Sat Aug 03, 2013 11:37 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Has anyone heard back from Gomez recently? - Tim. |
|
| Author: | Scrawny [ Sat Aug 03, 2013 11:54 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Might pay to call him |
|
| Author: | Gwagensteve [ Sat Aug 03, 2013 1:05 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
He hasn't been on the board since the 9th July. Steve |
|
| Author: | tim80z [ Fri Aug 09, 2013 1:24 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
I just got a text back. Apparently its all been thrown out. - Tim. |
|
| Author: | suzukikid [ Fri Aug 09, 2013 8:00 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
I got a door off him a few months ago! He was in and out of hospital with some health issues..... I'm sure he would t of turfed it all! |
|
| Author: | tim80z [ Fri Aug 09, 2013 9:13 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
GOMEZ (via SMS) wrote: Hi Tim. Sorry that I haven't been in touch or on AZ. No time to sit down lol. I threw out everything I posted up, SORRY. I needed it out ASAP. Sorry once again. Take care. - Tim. |
|
| Author: | suzukikid [ Sat Aug 10, 2013 7:12 am ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Haha fair enough!! I would of gone it all if I had of known that!! Haha |
|
| Author: | killa85 [ Sun Sep 22, 2013 8:18 pm ] |
| Post subject: | Re: CHEAP 16V eng & other CHEAP bits |
Hi do you still have the balleno engine |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|