auszookers.com
http://auszookers.com/forum/

Last chance for 99 XL7 and GV parts Melb.
http://auszookers.com/forum/viewtopic.php?f=7&t=41777
Page 1 of 1

Author:  Built4thrashing [ Sun Jul 07, 2013 11:36 am ]
Post subject:  Last chance for 99 XL7 and GV parts Melb.

Just bought a wreck for a few parts that I need for myself and putting the rest out there for anyone else that needs parts.

Car is a 1999 XL7. Dark Blue. A lot of the parts will fit the GV.

There is no motor, Gearbox or Transfer, Wheels are gone, and so are front CV's, steering rack and front hub assemblies. Everything else is up for grabs.


Front diff complete. (Yes it alloy) Sold
Rear diff. Housing is bent due to accident Center should be ok if I can get it out. $75
Brakes
Airbags $25 each
Headlights, $75 each ($175 new)
Chrome grill SOLD
Passenger upright tail light $15
Bumper taillights $30 pair
Towbar. (Should fit GV) SOLD
XL 7 Side steps $50
Tailshafts, $??? offers.
Interior seats,door skins, seatbelts etc. offers? .....
Guards, doors, tailgate. Offers.

Or if there is anything in particular your looking for just pm me or call me on 0408287539

PICK UP ONLY ON LARGE & HEAVY ITEMS. or you arrange your own courier.



Will only be available for 3 weeks and after then its getting scrapped so done waste time. Come grab a bargain



Pics...... coming.

Author:  Built4thrashing [ Sun Jul 07, 2013 11:42 am ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Image

Image

Image


Image


Image


Image


Image


Image


Image


Image


Image


Image

Author:  ninjamoses [ Sun Jul 07, 2013 11:54 am ]
Post subject:  Re: 99 XL7 and GV parts Melb.

I'll grab the grill mate if I can figure out a way to get it over here cheaply enough. Will drop you a PM later today.

Author:  Built4thrashing [ Sun Jul 07, 2013 12:06 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Done.

Author:  Built4thrashing [ Sun Jul 07, 2013 12:36 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

People that SMS me get in first.

Author:  atari4x4 [ Sun Jul 07, 2013 12:59 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

when you get a chance, can you check if the towbar will suit a GV? i'm pretty sure it should bolt right up, but would like to check if possible.

Author:  Built4thrashing [ Sun Jul 07, 2013 2:38 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Will be pulling sidesteps and tow bar off tonight. I'll check it against mine to see.


Anyone know the capacity of the XL7 fuel tank? Is it same as gv

Author:  alexxx [ Sun Jul 07, 2013 5:03 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

If Gus doesn't want the towbar...I need one. Happy to pay postage.

Thanks

Author:  Built4thrashing [ Sun Jul 07, 2013 5:17 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Ill pack the towbar up ready for a courier to pick it up....... I don't have time to organise postage for it.

Just so you can get pricing pick up is from Dandenong North. Vic.

Author:  atari4x4 [ Sun Jul 07, 2013 5:18 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

alexxxxxxxx, i was asking for you dude :wink:

Author:  alexxx [ Sun Jul 07, 2013 5:33 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Gustro what a legend. I'll get a price for the courier.

Author:  Built4thrashing [ Sun Jul 07, 2013 9:13 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Got loom out for the tow bar and its taped to it ready for a courier. ..

Ill pm you payment details.

Author:  alexxx [ Sun Jul 07, 2013 9:28 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

your a legend buddy!!!!

Sounds good. Ill organise courier tomorrow first thing.

Author:  shabz [ Mon Jul 08, 2013 4:11 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Incase anyones wondering, the xl-7 side steps will not fit the GV, even if you cut them shorter, the mounts still won't work, and it's lots of work to get them to fit.
I know this...i've tried :roll:

B4T - the interior plastic panel under the steering column...can't see it in the pics, is it there?

Author:  Built4thrashing [ Mon Jul 08, 2013 6:55 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Yeh it was but....... PJ pulled it all apart to get the airbags and cruise control out so not sure if he did it nicely or went postal on it.... Come have a look.

Author:  1madgerman [ Tue Jul 09, 2013 10:30 am ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Hey mate is the towbar sold?

Author:  Built4thrashing [ Tue Jul 09, 2013 7:06 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

1madgerman wrote:
Hey mate is the towbar sold?



Yeh sorry towbar is gone already.

Author:  Built4thrashing [ Thu Jul 11, 2013 5:44 pm ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Still have lots of bits available.......


Whats left is going to scrap metal on Monday july 22nd. If you haven't got your parts by them you miss out.

Author:  Built4thrashing [ Mon Jul 15, 2013 9:58 am ]
Post subject:  Re: 99 XL7 and GV parts Melb.

A few parts are sold but still have quite a bit of use full stuff on it.

Author:  Built4thrashing [ Mon Jul 15, 2013 10:38 am ]
Post subject:  Re: 99 XL7 and GV parts Melb.

Side steps still available...... Buyer couldn't organise courier.

Author:  Built4thrashing [ Sun Jul 21, 2013 1:04 pm ]
Post subject:  Re: Last chance for 99 XL7 and GV parts Melb.

Its your last chance to get some parts off this. Let me know what you need by end of today and ill pull it off if its still there.

Hopefully it gets picked up and taken away tomorrow.......

Author:  Built4thrashing [ Sun Jul 21, 2013 9:02 pm ]
Post subject:  Re: Last chance for 99 XL7 and GV parts Melb.

Your all too late. Wreck got picked up tonight.............. Still have a few bits I kept........

Author:  atari4x4 [ Thu Jul 25, 2013 7:41 pm ]
Post subject:  Re: Last chance for 99 XL7 and GV parts Melb.

crap...

i just remembered what i wanted off this thing, did you happen to pinch the dead foot pedal/foot rest out of it before it went to the scrap yard?

Author:  Built4thrashing [ Sat Jul 27, 2013 9:20 pm ]
Post subject:  Re: Last chance for 99 XL7 and GV parts Melb.

atari4x4 wrote:
crap...

i just remembered what i wanted off this thing, did you happen to pinch the dead foot pedal/foot rest out of it before it went to the scrap yard?



I did pull it out............................................. but that was only coz someone bought it....................... Sorry.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/