| auszookers.com http://auszookers.com/forum/ |
|
| Bits and pieces GV/vit stuff http://auszookers.com/forum/viewtopic.php?f=7&t=42080 |
Page 1 of 1 |
| Author: | klutched [ Mon Jul 22, 2013 7:19 pm ] |
| Post subject: | Bits and pieces GV/vit stuff |
Hey guys, few things I wanna get rid of. GV 3" front springs - $100  Vit/GV Alloy front complete diff no internals - $40 And a diff housing $20  Vit 22 spline front axle - $40 ea  GV Transfer case (Not 100% sure what's wrong with it but 4WD doesn't lock in so thinking a selector or something?) - $100  Open to offers on stuff. Cheers |
|
| Author: | jimnynutter [ Thu Jul 25, 2013 10:21 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
Are the gv front axles 26 spline? |
|
| Author: | atari4x4 [ Thu Jul 25, 2013 10:44 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
yes but are too long to fit a GV steel diff with locker, as the vacuum operated GV diff centre sits further to the RHS. you could get one chopped down to suit & a new spring clip groove cut. |
|
| Author: | jimnynutter [ Fri Jul 26, 2013 9:50 am ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
Sweet |
|
| Author: | klutched [ Fri Jul 26, 2013 10:00 am ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
atari4x4 wrote: yes but are too long to fit a GV steel diff with locker, as the vacuum operated GV diff centre sits further to the RHS. you could get one chopped down to suit & a new spring clip groove cut. Yeah won't fit even with a vit open center  Do you know how much it would be to chop one down? Might do that if it's not too much so I have a couple spares. |
|
| Author: | atari4x4 [ Fri Jul 26, 2013 10:09 am ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
this much 
|
|
| Author: | klutched [ Fri Jul 26, 2013 11:30 am ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
Oh my bad i mean how much it would cost? |
|
| Author: | atari4x4 [ Fri Jul 26, 2013 11:32 am ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
NFI take it to a machinist |
|
| Author: | Sco-tie [ Fri Jul 26, 2013 1:38 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
ill buy them off u! |
|
| Author: | klutched [ Fri Jul 26, 2013 2:18 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
Sco-tie wrote: ill buy them off u! I'll see what they want to machine them down to a vit one first and if it's not worth it they're yours 
|
|
| Author: | klutched [ Sat Aug 10, 2013 7:03 am ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
Bump!!! |
|
| Author: | klutched [ Tue Sep 03, 2013 5:12 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
Bump new prices |
|
| Author: | abs76 [ Mon Sep 09, 2013 8:39 am ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
u still got the stock diff brackets ? fit 2003 yes? im in brissy |
|
| Author: | Charlie Brown [ Wed Sep 11, 2013 5:26 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
hmmmm I wonder how these would go in the front of my vitara... |
|
| Author: | atari4x4 [ Wed Sep 11, 2013 5:31 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
which bits in-particular? 
|
|
| Author: | Charlie Brown [ Wed Sep 11, 2013 5:53 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
springs whoops forgot to specify =P probably be too stiff! |
|
| Author: | atari4x4 [ Wed Sep 11, 2013 5:59 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
yeah i'd say they'd be pretty firm, might be ok if you had a full winch bar & winch. |
|
| Author: | Charlie Brown [ Wed Sep 11, 2013 7:35 pm ] |
| Post subject: | Re: Bits and pieces GV/vit stuff |
Hmm can't be much stiffer than the dobinson ones I have in now even after a year I'd still want something softer! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|