kane94 wrote:
Hi jonno im after the 4 stud pair of the carby SWB, im from Melbourne so will Pm you regarding details
They wont just be carby ones, i think the change over was mid 95 so you can use any before then carby, EFI, SWB or LWB all the same
| auszookers.com http://auszookers.com/forum/ |
|
| Wrecking 1.6 EFI Vitara VIC http://auszookers.com/forum/viewtopic.php?f=7&t=42746 |
Page 1 of 2 |
| Author: | Jonno [ Sun Sep 01, 2013 10:29 pm ] |
| Post subject: | Wrecking 1.6 EFI Vitara VIC |
sold - pls delete |
|
| Author: | brchalta [ Mon Sep 02, 2013 7:54 am ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
How much for power steer pump and brackets.send to bris. |
|
| Author: | Jonno [ Mon Sep 02, 2013 11:27 am ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Jonno wrote: The following items are not for sale - Engine, auto, diffs, power steering, air con, fuel tank, wheels, cluster, loom Not for sale mate |
|
| Author: | kane94 [ Mon Sep 02, 2013 3:49 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Hi do you have rear axle shafts?, thanks |
|
| Author: | Jonno [ Mon Sep 02, 2013 4:21 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Hi Kane, yes I do, I have two sets, one from this car and one from a carby auto SWB which I assume are identical. $50 a pair |
|
| Author: | Joe [ Mon Sep 02, 2013 8:34 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Jonno wrote: Hi Kane, yes I do, I have two sets, one from this car and one from a carby auto SWB which I assume are identical. $50 a pair There are differences between the two, earlier axles have the four bolts that hold the drum brake on and this one being a later modal doesn't have a look behind the centre caps and you will see what i'm on about Speaking of centre caps how much for them with postage to 6163? |
|
| Author: | Jonno [ Mon Sep 02, 2013 8:53 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Ok thanks Joe, I will PM you if they are ok. Can't remember if they are all there. Kane let me know which axles you are after |
|
| Author: | kane94 [ Mon Sep 02, 2013 10:23 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Hi jonno im after the 4 stud pair of the carby SWB, im from Melbourne so will Pm you regarding details |
|
| Author: | kane94 [ Mon Sep 02, 2013 10:28 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Also, do you have any front tie rods for sale? and if yes what sort of condition are they in? |
|
| Author: | Sco-tie [ Mon Sep 02, 2013 11:52 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
22 or 26 spline front axles? |
|
| Author: | Joe [ Mon Sep 02, 2013 11:53 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
kane94 wrote: Hi jonno im after the 4 stud pair of the carby SWB, im from Melbourne so will Pm you regarding details They wont just be carby ones, i think the change over was mid 95 so you can use any before then carby, EFI, SWB or LWB all the same
|
|
| Author: | Joe [ Mon Sep 02, 2013 11:54 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Sco-tie wrote: 22 or 26 spline front axles? Will be 26 |
|
| Author: | atari4x4 [ Mon Sep 02, 2013 11:56 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Joe wrote: Sco-tie wrote: 22 or 26 spline front axles? Will be 26
|
|
| Author: | Polar_Bear [ Tue Sep 03, 2013 12:02 am ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
OMGWTF! a swb efi auto vit.....dont happen to be selling the rear tailshaft by any chance? |
|
| Author: | atari4x4 [ Tue Sep 03, 2013 12:07 am ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Polar_Bear wrote: OMGWTF! a swb efi auto vit.....dont happen to be selling the rear tailshaft by any chance?  make this happen
|
|
| Author: | Sco-tie [ Tue Sep 03, 2013 12:13 am ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Put me done for the Front LHS Inner axle and RHS CV assembly posted to Adelaide. Any other adelaidians getting bits let me know and we can combine post |
|
| Author: | Joe [ Tue Sep 03, 2013 12:48 am ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Polar_Bear wrote: OMGWTF! a swb efi auto vit.....dont happen to be selling the rear tailshaft by any chance? Haha I thought about you last night when this was frist posted but thought you already got hold of one |
|
| Author: | klutched [ Tue Sep 03, 2013 8:04 am ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Sco-tie wrote: Put me done for the Front LHS Inner axle and RHS CV assembly posted to Adelaide. Any other adelaidians getting bits let me know and we can combine post When the RHS CV breaks put the inner on a gv shaft so it'll be the right length. The 26 spline cvs from the SE is shorter (but will fit) and pull out of the joint. |
|
| Author: | Jonno [ Tue Sep 03, 2013 9:24 am ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Kane - the early model rear axles are yours. The drivers side tie rod is bent but the rest are ok, you can have the tie rods for $15? I am around Sunday if you want to pick up the axles and take a look at the tie rods Scotie - sorry mate, you are second in line. I have already had one person commit to these so if it falls through I will let you know Polar Bear - yes I am! I will PM you |
|
| Author: | emre [ Tue Sep 03, 2013 9:21 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Interested in the rear seats... Will be in Melb on Sunday so I'll shoot you a text. |
|
| Author: | Lil_Rat [ Wed Sep 04, 2013 1:53 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Would you post the softtop to perth mate? If so would could you get a rough estimate of price including postage? |
|
| Author: | Jonno [ Wed Sep 04, 2013 5:20 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
No worries, seats are out and waiting for you emre Yes, happy to post, I will remove it on the weekend and see how small it packs up and pm you a quote. Do you need any of the mounting assembly? |
|
| Author: | Lil_Rat [ Wed Sep 04, 2013 10:26 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Nah mate. Just all of the soft top! Just pm me when you get a quote haha. My current softtop has the rear window gaffa taped on haha |
|
| Author: | Jonno [ Mon Sep 09, 2013 9:08 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
All PM's replied! Still plenty left. BUMP |
|
| Author: | atari4x4 [ Mon Sep 09, 2013 9:10 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
cup holders? |
|
| Author: | Jonno [ Mon Sep 09, 2013 9:11 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
atari4x4 wrote: cup holders? I dont know if this is serious?! Does it even have them? |
|
| Author: | Polar_Bear [ Mon Sep 09, 2013 9:12 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
atari4x4 wrote: cup holders? too late, ive already shotgunned them 
|
|
| Author: | Chop [ Mon Sep 09, 2013 9:35 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Polar_Bear wrote: OMGWTF! a swb efi auto vit.....dont happen to be selling the rear tailshaft by any chance? Isn't this beyond even needing one of these?
|
|
| Author: | Joe [ Mon Sep 09, 2013 9:58 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Jonno wrote: All PM's replied! Still plenty left. BUMP Did my moneys go through to ya? |
|
| Author: | Jonno [ Mon Sep 09, 2013 10:03 pm ] |
| Post subject: | Re: Wrecking 1.6 EFI Vitara VIC |
Joe wrote: Jonno wrote: All PM's replied! Still plenty left. BUMP Did my moneys go through to ya? Yep - will send your stuff in the morning |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|