Yeah I know Design Fab make em, if he wanted bugger all for it I would snap it up
| auszookers.com http://auszookers.com/forum/ |
|
| Sierra transfer case with 6.1s http://auszookers.com/forum/viewtopic.php?f=7&t=43905 |
Page 1 of 1 |
| Author: | Rossco [ Fri Nov 15, 2013 6:35 am ] |
| Post subject: | Sierra transfer case with 6.1s |
I have been hanging on to this but plans have changed and I need the money to fund my new mountain bike purchase. sierra transfer case with: -series 3 rockhopper gears installed (6.1s) -rocktoy ring - lifting blocks, I think they are 1" I will measure them -gear lever is reshaped to work with a 2" body lift - drive shaft hand brake -breather hose (hose clamp, not tapped) I purchased this lightly used from the previous owner. He ran it in his car for a few months and then put it in a race setup which never ran. I have seen them run in his car but never fitted it to mine. I am in Townsville FNQ so happy to package it and get it to a depot for postage. Looking for $600. |
|
| Author: | MikeyS [ Fri Nov 15, 2013 8:26 am ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
Hi Rossco do you know how much it would be to post the transfer case to Noosa 4565 QLD. how much does the transfer case weigh ? |
|
| Author: | Rossco [ Fri Nov 15, 2013 10:32 am ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
Ill get it on the scale and have a look for you this arvo after work. |
|
| Author: | 31zook [ Fri Nov 15, 2013 10:44 am ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
Ill buy just the rock toy ring off you if you want. |
|
| Author: | Rossco [ Fri Nov 15, 2013 5:43 pm ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
I would prefer sell it all together but I'll keep you in mind if things get sold separately. |
|
| Author: | 31zook [ Fri Nov 15, 2013 6:10 pm ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
Cheers |
|
| Author: | Daves4wd [ Fri Nov 15, 2013 8:51 pm ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
31zook wrote: Ill buy just the rock toy ring off you if you want. If he dose sell it there's a bloke on eBay selling a ring for a sierra case $40 from memory |
|
| Author: | 31zook [ Sat Nov 16, 2013 12:14 am ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
Yeah I know Design Fab make em, if he wanted bugger all for it I would snap it up
|
|
| Author: | Asps91 [ Sat Nov 16, 2013 6:30 pm ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
Would you post? Very keen! |
|
| Author: | Rossco [ Sat Nov 16, 2013 10:43 pm ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
Ya mate what's your post code ill have a look at freight costs for you. |
|
| Author: | Asps91 [ Sun Nov 17, 2013 10:31 am ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
2121. Will the t case work fit you reckon without the body lift? Is it a wt case? |
|
| Author: | Rossco [ Sun Nov 17, 2013 11:13 am ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
$65 to you door or $48 to the depot in Villawood with e-go. I couldn't get it to fit because of the rocktoy ring. I could stand corrected thought if someone has gotten the rocktoy ring to fit without a body lift. if not then you can take it off and use the stock mounts. ya its a WT case |
|
| Author: | Asps91 [ Sun Nov 17, 2013 12:40 pm ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
Can you send e some pics of the t case hand brake? 0404111174 Shouldn't be a problem removing the rocktoy ring, ill just mount it using ben t transfer arms. |
|
| Author: | Rossco [ Sun Nov 17, 2013 6:15 pm ] |
| Post subject: | Re: Sierra transfer case with 6.1s |
sold thanks everyone |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|