My Mate is selling his GV check the first pic for price and details $7500
| auszookers.com http://auszookers.com/forum/ |
|
| 99 Grand Vitara - NSW Windang http://auszookers.com/forum/viewtopic.php?f=7&t=44271 |
Page 1 of 1 |
| Author: | jimbo_jones [ Wed Dec 11, 2013 10:23 pm ] |
| Post subject: | 99 Grand Vitara - NSW Windang |
My Mate is selling his GV check the first pic for price and details $7500
|
|
| Author: | jimbo_jones [ Sun Dec 15, 2013 3:14 pm ] |
| Post subject: | Re: 99 Grand Vitara - NSW Windang |
bump 
|
|
| Author: | Poita [ Mon Jan 06, 2014 2:51 pm ] |
| Post subject: | Re: 99 Grand Vitara - NSW Windang |
Anyone have any idea what would be needed to get this through Regency and registered in SA? |
|
| Author: | jimbo_jones [ Mon Jan 06, 2014 2:54 pm ] |
| Post subject: | Re: 99 Grand Vitara - NSW Windang |
Ask Atari |
|
| Author: | Sco-tie [ Mon Jan 06, 2014 10:20 pm ] |
| Post subject: | Re: 99 Grand Vitara - NSW Windang |
Either stock suspension or remove the BL, would be easier to just remove the springs and put stock ones in. Have to check what the BL is made of has to be alloy or solid poly not just wood or something that can compress. stock tyres if they are bigger than standard which they look like. Tint should be fine doesn't look very dark at all. Bar should be fine as it doesn't have air bags, front lights would best be removed for rego as they may be protruding slightly forward from the bar and having 2 sets could be over the max limit of 6 total lights. Front drive shaft oil seal is most likely leaking so factor that in as well. Also need to check exhaust as it has a new tip so may be louder. |
|
| Author: | jimbo_jones [ Mon Jan 06, 2014 11:30 pm ] |
| Post subject: | Re: 99 Grand Vitara - NSW Windang |
No oil leaks and has poly blocks |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|