| auszookers.com http://auszookers.com/forum/ |
|
| Transfer lift blocks http://auszookers.com/forum/viewtopic.php?f=7&t=46861 |
Page 1 of 1 |
| Author: | skitzlux [ Sat Jul 05, 2014 3:00 pm ] |
| Post subject: | Transfer lift blocks |
Up for sale is 3 transfer lift blocks I made they lift the transfer 50mm I went to fit them then realized I can't lift it that high with no body lift located in brissy I'm after $30 or best offer can text pics as I can't upload them 0401179986 |
|
| Author: | Bozy97 [ Mon Jul 28, 2014 12:10 pm ] |
| Post subject: | Re: Transfer lift blocks |
Hey bud, would these put the drive shafts on too much of an angle? I am very interested!!! |
|
| Author: | skitzlux [ Mon Jul 28, 2014 4:56 pm ] |
| Post subject: | Re: Transfer lift blocks |
Hey mate I'm not sure if it will or not as I didn't get to fit to my car. but people put transfer lifts in their sierras no probs. might want to ask someone that has lifted theirs before on here. Let me know if you want them |
|
| Author: | Bozy97 [ Mon Jul 28, 2014 6:19 pm ] |
| Post subject: | Re: Transfer lift blocks |
How do they mount anyway? |
|
| Author: | skitzlux [ Wed Jul 30, 2014 4:22 pm ] |
| Post subject: | Re: Transfer lift blocks |
Bolt your rubber mount to the spacer and bolt the spacer to the chassis. it comes with nuts and washers and the bolts are welded in the spacer so you do t need to hold the bolt when doing it up |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|